carl9170 firmware: update version to 1.9.7

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

menuconfig: Replace CIRCLEQ by list_head-style lists.

sys/queue.h and CIRCLEQ in particular have proven to cause portability
problems (reported on Debian Sarge, Cygwin and FreeBSD)

Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: Yaakov Selkowitz <yselkowitz@users.sourceforge.net>
Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

menuconfig: Assign jump keys per-page instead of globally

At the moment, keys 1-9 are assigned to the first 9 search results. This patch
makes them assigned to the first 9 results per-page instead. We are much less
likely to run out of keys that way.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

menuconfig: Add jump keys to search results

makes it possible to jump directly to the menu for a configuration entry after
having searched for it with '/'. If this menu is not currently accessible we
jump to the nearest accessible parent instead. After exiting this menu, the
user is returned to the search results where he may jump further in or
elsewhere.

Signed-off-by: Benjamin Poirier <bpoirier@suse.de>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: fix VHT max AMPDU exponent definition

This is really a 3-bit field, not a single bit,
so declare a mask and shift. Also fix hwsim, it
advertises the maximum possible.

While at it reindent all the defines using tabs
instead of spaces.

Change-Id: I7cd81c0d72f76deb5010aba5bfa3dd312006e898
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: support VHT association

Determine the VHT channel from the AP's VHT operation IE
(if present) and configure the hardware to that channel
if it is supported. If channel contexts cause a channel
to not be usable, try a smaller bandwidth.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: add definitions for VHT MCS support

Add definitions for the VHT MCS support values that
are used to indicate, for each number of streams
(1 through 8) which MCSes are supported.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: move Mesh Capability field definition to ieee80211.h

Signed-off-by: Marco Porsch <marco.porsch@etit.tu-chemnitz.de>
[prefix with IEEE80211_]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: introduce IEEE80211_NUM_TIDS and use it

Introduce IEEE80211_NUM_TIDS in the generic 802.11
header file and use it in place of STA_TID_NUM and
NUM_RX_DATA_QUEUES which are both really the number
of TIDs.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix max beacon length

According to AR9170's data sheet, the
beacon length register only cares about
bits 8:0. So the max length [with 4
reserved bytes for the FCS] is at 511.

Note:

Because the beacon has to be stored in the
DMA memory region, we have to be careful
so we don't waste precious memory due to
alignment and padding. Therefore I decided
to reduce the max beacon length even more
down to 480 bytes. [This saves one 320 byte
DMA block from becoming unused padding, when
the default 2 vif configuration is selected].

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: add peer-to-peer related definitions

The Peer-to-Peer IE is vendor-specific IE identified by WiFi Alliance
OUI and specific P2P OUI type. The payload of this IE consists of
so-called P2P attributes. This patch adds definitions for processing
these attributes.

Reviewed-by: Hante Meuleman <meuleman@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware toolchain: binutils 2.23.1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: remove duplicate enum ieee80211_eid definitions

WLAN_EID_WPA and WLAN_EID_GENERIC mapped to the same value
as WLAN_EID_VENDOR_SPECIFIC. The last one being more in line
with the standard specification. Removing WLAN_EID_WPA and
WLAN_EID_GENERIC as there are no longer drivers using these.

Cc: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: Rename VHT cap struct

Rename struct ieee80211_vht_capabilities to ieee80211_vht_cap
and renamed its member vht_capabilities_info to vht_cap_info.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: remove obsolete chan no/center freq conversion functions

There are a number of functions that shouldn't really
be used when modern functions that take the band are
available in cfg80211. Remove these, but for now keep
 * ieee80211_freq_to_dsss_chan and
 * ieee80211_dsss_chan_to_freq
as they're used in older drivers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware toolchain: binutils 2.23

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware toolchain: various small updates

 - gnu tar can automatically decides the decompression algo.

 - because we use the filename (*_TAR) as a target it better
   be the same as in the fetch (*_URL)

 - stringify URLs.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add note about rx filter usage

This patch adds a note about what it means when
a rx filter bit is set. Because unlike what most
people assume, it means that the data which matches
the condition is discarded and not
"passed to the host".

Reported-by: Javier Lopez <jlopex@cozybit.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove inline attributes

The compiler is smart enough to decide whenever
these functions can be inlined or not.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 toolchain: update to gcc-4.7.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: update .gitignore

 - eeprom_fix is no more

 - ignore fwprepare binary

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: allow long lines in config file

For some config options (CONFIG_EXTRA_FIRMWARE, for example), the length
of a config file line can exceed the 1024 byte buffer.

Switch from fgets to compat_getline to fix. compat_getline is an
internally implimented getline work-alike for portability purposes.

Signed-off-by: Cody Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: delete last traces of __enabled_ from autoconf.h

We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"

Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something.  We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: extract tx and rx code from wlan.c into separate files

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove CONFIG_CARL9170FW_CAB_QUEUE

The software supported cab queue is now a standard
feature and will always be available.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: move cmd.c into hostif.c

The command handler is part of the host
application interface too, so it will fit
there nicely.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: refactor timer functions

Thanks to LTO, the timer routines can be moved into
a proper context without added overhead at runtime.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170: remove eeprom_fix utility

The carl9170 driver in the kernel doesn't
have the capability anymore. Hence, this
tool is no longer needed.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170: link time optimization build

Enabling LTO will hopefully lead to smaller
firmware binaries and maybe even slightly
better performance.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 toolchain: update toolchain disk space requirements

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kbuild: all{no,yes,mod,def,rand}config only read files when instructed to.

Prevent subtle surprises to both people working on the kconfig code
and people using make allnoconfig allyesconfig allmoconfig and
randconfig by only attempting to read a config file if
KCONFIG_ALLCONFIG is set.

Common sense suggests attempting to read the extra config files does
not make sense unless requested.  The documentation says the code
won't attempt to read the extra config files unless requested.
Current usage does not appear to include people depending on the code
reading the config files without the variable being set So do the
simple thing and stop reading config files when passed
all{no,yes,mod,def,rand}config unless KCONFIG_ALLCONFIG environment
variable is set.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: Add error handling to KCONFIG_ALLCONFIG

- Only try to read the file specified if KCONFIG_ALL_CONFIG is set to
  something other than the empty string or "1".

- Don't use stat to check the name passed to conf_read_simple so that
  zconf_fopen can find the file in the current directory or in SRCTREE
  removing a extremely source of confusing failure, where KCONFIG_ALL_CONFIG
  was not interpreted with respect to the directory make was called in.

- If conf_read_simple fails complain clearly and stop processing.
  Allowing the simple debugging of typos.

- Clearly document the behavior so it is clear to users which
  values are treated as flags and which values are treated as
  filenames.

Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170: remove carlu

The userspace utility will be become a separate project.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: 60g protocol constants

Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories

Introduce GCMP cipher, mandatory by 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: add VHT (802.11ac) definitions

Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: more OUI type definitions for WLAN_OUI_MICROSOFT

WMM and WPS

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: implement the proactive PREQ generation

Generate the proactive PREQ element as defined in
Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012
based on the selection of dot11MeshHWMPRootMode as follow:
dot11MeshHWMPRootMode (2) is proactivePREQnoPREP
dot11MeshHWMPRootMode (3) is proactivePREQwithPREP

The proactive PREQ is generated based on the interval
defined by dot11MeshHWMProotInterval.

With this change, proactive RANN element is now generated
if the dot11MeshHWMPRootMode is set to (4) instead of (1).

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: definitions for Microsoft Vendor OUI and WPA OUI type

Reference: http://standards.ieee.org/develop/regauth/oui/oui.txt

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

{nl,cfg,mac}80211: fix the coding style related to mesh parameters

fix the coding style related to mesh parameters, especially the indentation,
as pointed out by Johannes Berg.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 cmake: config requires at least cmake 2.8.4

"it needs at least 2.8.4 due to use of CMAKE_CURRENT_LIST_DIR."

Spotted-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.6

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add automatic BA filter

BA are normally filtered to conserve bandwidth and
cpu cycles. However, if the application has sent a
BAR, the firmware has to escalate the BA accouting.
Hence, for a brief period, the firmware has to let
all BA temporarily pass through the filter.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: set NO ACK bit in BA control

This is similar to what the original firmware does.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Revert "carl9170 firmware: add workaround for carl vs. mac BAR problem"

This reverts commit c5ade0a37dc2650ec206cce64dcaea32d2bd86be.

The issue has been fixed in the driver.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add workaround for carl vs. mac BAR problem

It looks like the AR9170 MAC seems to be incapable of
matching BA to xmitted BARs. This is a problem because
when mac80211 tries to recover it sends out BARs which
can't be matched to a BA and so it goes on. Of course
having lots of stale BARs around causes mayhem in the
receiver buffer at the HT peer on the other end because
it's constantly flushing the reorder buffer.

Note: This is hopefully just a temporary fix, but until
there's a better method, it will provide at least some
relief.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add note about BAR tx status issues

The workaround will be implemented in the driver as the
firmware can't efficiently deal with BA responses.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix BAR -> BA handling

 1. fix a regression which was introduced by accident by:
carl9170 firmware: initial WoWLAN support
The BlockACK should not be a NULLFUNC

 2. remove superfluous control | 1.
No idea, why the original firmware had that set.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 toolchain: update to gcc-4.7.1

Note:
There are no more gcc-core packages.
<http://gcc.gnu.org/ml/gcc-patches/2011-05/msg01525.html>

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Set the correct values for hwmp (1) and airtimeLinkMetric (1)

Per sections 8.4.2.100.2 and 8.4.2.100.3 of Std 802.11-2012

Reported-by: Shinichi Hotori <hotorinn@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Implement mesh synchronization framework

This patch adds MBSS extensible synchronization framework (Sec.
13.13.2 of IEEE Std. 802.11-2012).

The framework is implemented via an ops table which defines the
following functions:

    rx_bcn_presp() - this is called every time a mesh beacon is
received.
    adjust_tbtt() - this is called immediately before a beacon is about
to be transmitted.

The default neighbor offset synchronization defined in the standard is
implemented.  We also provide template functions for vendor specific
methods.

When neighbor offset synchronization is active (which is the default)
mesh neighbors in the same MBSS will track timing offsets to each other
and compensate clock drift.

In our tests we observed that this mesh synchronization implementation
successfully corrected drifts between stations of ~2PPM while
introducing a jitter of ~20us.

It is also possible to test this framework on mac80211_hwsim simulated
phys to see how it behaves under different topologies, over poor links,
etc.

Signed-off-by: Marco Porsch <marco.porsch@s2005.tu-chemnitz.de>
Signed-off-by: Pavel Zubarev <pavel.zubarev@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: fix the sparse warnings on endian handling in RANN propagation

The HWMP sequence number of received RANN element is compared to decide whether to be
propagated. The sequence number is required to covert from 32bit little endian data into
CPUs endianness for comparison. The same applies to the RANN metric.

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: rename ht_info to ht_operation

Since some of the HT code pre-dates 802.11n-2009
some names are wrong. The one that bothers me most
is that "HT operation" is called "HT information"
in our code and that causes confusion.

Rename "HT information" to "HT operation" and also
the control_chan field to primary_chan to match
the name used in the spec.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Acked-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: delete last traces of __enabled_ from autoconf.h

We've now fixed IS_ENABLED() and friends to not require any special
"__enabled_" prefixed versions of the normal Kconfig options, so delete
the last traces of them being generated.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Revert "kconfig: fix __enabled_ macros definition for invisible and un-selected symbols"

This reverts commit 953742c8fe8ac45be453fee959d7be40cd89f920.

Dumping two lines into autoconf.h for all existing Kconfig options
results in a giant file (~16k lines) we have to process each time we
compile something.  We've weaned IS_ENABLED() and similar off of
requiring the __enabled_ definitions so now we can revert the change
which caused all the extra lines.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: fix new choices being skipped upon config update

Running `oldconfig' after any of the following configuration change:

either trivial addition, such as:

config A
bool "A"

choice
prompt "Choice ?"
depends on A

config CHOICE_B
bool "Choice B"

config CHOICE_C
bool "Choice C"
endchoice

or more tricky change:

OLD KCONFIG                      |  NEW KCONFIG
                                 |
                                 |  config A
                                 |          bool "A"
                                 |
choice                           |  choice
        prompt "Choice ?"        |          prompt "Choice ?"
                                 |
        config CHOICE_C          |          config CHOICE_C
                bool "Choice C"  |                  bool "Choice C"
                                 |
        config CHOICE_D          |          config CHOICE_D
                bool "Choice D"  |                  bool "Choice D"
endchoice                        |
                                 |          config CHOICE_E
                                 |                  bool "Choice E"
                                 |                  depends on A
                                 |  endchoice

will not cause the choice to be considered as NEW, and thus not be
asked. The cause of this behavior is that choice's novelty are computed
statically right after the saved configuration has been read. At this
point, the new dependency's value is still unknown and asserted to be
`no'. Moreover, no update to this decision is made afterward.

Correct this by dynamically evaluating a choice's novelty, and removing the
static evaluation.

Reported-and-tested-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kbuild: Fix compiler warning with assertion when calling 'fwrite'

Reinhard Tartler discovered a corner case of calling xfwrite() where the
length of the string is zero.

Arnaud Lacombe suggested to use assertion for the corner case, as
fwrite(3) is currently used:

 1) in comment printers. Empty comment are not allowed.
 2) in a callback passed to expr_print(), where the string printed is
    either NULL OR non-empty.
 3) in the lexer, auto-generated, and unused.

I feel using assertion is a good solution:

 1) It cleanly takes care of the above-mentioned corner case.
 2) It can be easily disabled by defining NDEBUG.
 3) It asserts xfwrite() is simply a wrapper for fwrite().

Reported-by: Reinhard Tartler <Reinhard.Tartler@informatik.uni-erlangen.de>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Jean Sacren <sakiwit@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

kconfig: use xfwrite wrapper function to silence warnings

Use the xfwrite wrapper function defined in lkc.h to check the return value of
fwrite and silence these warnings.

  HOSTCC  scripts/kconfig/zconf.tab.o
config/zconf.tab.c: In function 'header_print_comment':
config/confdata.c:551:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
config/zconf.tab.c: In function 'kconfig_print_comment':
config/confdata.c:467:10: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result

Signed-off-by: Peter Foley <pefoley2@verizon.net>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove BAR->BA clutter

No need for a dynamic rate adjustment for this special
case of outgoing BAs. The original firmware didn't care
much for them either.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix BAR->BA delivery

Previously, if the HT peer sended "just" enough BARs so
ba_head_idx warps around and the ba_head_idx == ba_tail_idx
condition will be true, the already queued BAs would be
lost.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.5

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.6.3

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: toolchain newlib 1.20.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: minor wlan cleanup

 * replace hdr->seq_ctrl voodoo with use ieee80211_is_first_frag

 * add comment about consume_retry

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: Introduce ieee80211_is_first_frag

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: accept public action frames with mismatched BSSID

Arik's patch "mac80211: allow action frames with unknown
BSSID in GO mode" allowed any action frames in P2P mode
to go through, but only to cooked monitor interfaces as
the IEEE80211_RX_RA_MATCH was still cleared. As a result
my no-monitor patches broke invitation responses.

Instead of allowing any action frames in P2P GO mode to
go through with a wrong BSSID like that patch did, allow
all public action frames. They will never be processed
by mac80211, but can be reported via nl80211 then.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove debug tx/rx paths crud

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: double check if unlinked desc matches head desc

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: get rid of nested wlan_tx calls

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix terminator assert

While calculating the number of assigned
terminator descriptors is easy enough for
an human at "compile" time, gcc isn't that
clever. Therefore the check has to run at
runtime.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add init_queue helper function

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove gcc workaround

this workaround is no longer necessary, gcc
now compiles the code without any spurious
complains.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix firmware build script

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: trivial checkpatch fixes

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: optimize get_async

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix minute errors

 * typos in comments

 * inline static vs. static inline

 * line too long

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: enable CONFIG_CARL9170FW_USB_INIT_FIRMWARE by default

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add __be{16,32,64} typedefs

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: QoS multicast frames have No Ack policy

Previously QoS multicast frames had the Normal Acknowledgment QoS
control bits set. This would cause broadcast frames to be discarded by
peers with which we have a BA session, since their sequence number would
fall outside the allowed range. Set No Ack QoS control bits on multicast
QoS frames and filter these in de-aggregation code.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
v2: Use proper QoS Ack Policy ctl field mask (Christian)

v3: Clean up conditional (Johannes)
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: Define cipher suite selector for WPI-SMS4

This value is used for WPI-SMS4 in ISO/IEC JTC 1 N 9880.

Signed-off-by: Jouni Malinen <jouni@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: handle HT PHY BSS membership selector value correctly

802.11n-2009 extends the supported rates element with a
magic value which can be used to prevent legacy stations
from joining the BSS.

However, this magic value is not a rate like the others
and the magic can simply be ignored/skipped at this late
stage.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>---
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: handle TDLS high-level commands and frames

Register and implement the TDLS cfg80211 callback functions.

Internally prepare and send TDLS management frames. We incorporate
local STA capabilities and supported rates with extra IEs given by
usermode. The resulting packet is either encapsulated in a data frame,
or assembled as an action frame. It is transmitted either directly or
through the AP, as mandated by the TDLS specification.

Declare support for the TDLS external setup wiphy capability. This
tells usermode to handle link setup and discovery on its own, and use the
kernel driver for sending TDLS mgmt packets.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Cc: Kalyan C Gaddam <chakkal@iit.edu>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

cfg80211: add cfg80211_find_vendor_ie() function

Add function to find vendor-specific ie (along with
vendor-specific ie struct definition and P2P OUI values)

Signed-off-by: Eliad Peller <eliad@wizery.com>
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Mesh data frames must have the QoS header

Per sec 7.1.3.5 of draft 12.0 of 802.11s, mesh frames indicate the
presence of the mesh control header in their QoS header.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: mesh gate implementation

In this implementation, a mesh gate is a root node with a certain bit
set in its RANN flags. The mpath to this root node is marked as a path
to a gate, and added to our list of known gates for this if_mesh. Once a
path discovery process fails, we forward the unresolved frames to a
known gate. Thanks to Luis Rodriguez for refactoring and bug fix help.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: update mesh path selection frame format

Make mesh path selection frames Mesh Action category, remove outdated
Mesh Path Selection category and defines, use updated reason codes, add
mesh_action_is_path_sel for readability, and update/correct path
selection IEs.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add mesh action codes

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: update mesh peering frame format

This patch updates the mesh peering frames to the format specified in
the recently ratified 802.11s standard. Several changes took place to
make this happen:

- Change RX path to handle new self-protected frames
- Add new Peering management IE
- Remove old Peer Link IE
- Remove old plink_action field in ieee80211_mgmt header

These changes by themselves would either break peering, or work by
coincidence, so squash them all into this patch.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: introduce Self Protected Action codes

802.11s introduces a new action frame category, add action codes as well
as an entry in ieee80211_mgmt.

Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

wireless: Introduce defines for BAR TID_INFO & MULTI_TID fields

While at it also fix the indention of the other IEEE80211_BAR_CTRL_ defines.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

config: fix __enabled_ macros definition for invisible and un-selected symbols

__enabled_<sym-name> are only generated on visible or selected entries, do not
reflect the purpose of its introduction.

Fix this by always generating these entries for named symbol.

Reported-by: Rabin Vincent <rabin@rab.in>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

config: factor code in menu_get_ext_help()

Cc: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Signed-off-by: Arnaud Lacombe <lacombar@gmail.com>
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

config: Fix help text not displayed in choice option.

Help text under choice menu is never displayed because it does not have
symbol name associated with it, however many kconfigs have help text
under choice, assuming that it will be displayed when user selects help.
for example in Kconfig if we have:
choice
        prompt "Choice"
        ---help---
           HELP TEXT ...

config A
        bool "A"

config B
        bool "B"

endchoice

Without this patch "HELP TEXT" is not displayed when user selects help
option when "Choice" is highlighted from menuconfig or xconfig or
gconfig.

This patch changes the logic in menu_get_ext_help to display help for
cases which dont have symbol names like choice.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Reviewed-by: Stuart Menefy <stuart.menefy@st.com>
Reviewed-by: Arnaud Lacombe <lacombar@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Michal Marek <mmarek@suse.cz>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove wol #ifdef leftovers

Thanks to the aggressive cflags, the compiler will
optimize the check away if wol is not enabled.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: toolchain binutils 2.22

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: refactoring wlan_tx_ampdu

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: move wowlan routines into separate files

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.6.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

config: import latest kconfig

commit 2a11c8ea20bf850b3a2c60db8c2e7497d28aba99
Subject: "kconfig: Introduce IS_ENABLED(), IS_BUILTIN() and IS_MODULE()"

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add missing out-of-bound check in WoWLAN code

src/wlan.c: In function ‘wlan_rx_wol_probe_ssid’:
src/wlan.c:830:30: error: variable ‘end’ set but not used

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>