+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
/*
* This file holds USB constants and structures that are needed for
* USB device APIs. These are used by the USB device model, which is
* This bit flag is used in endpoint descriptors' bEndpointAddress field.
* It's also one of three fields in control requests bRequestType.
*/
-#define USB_DIR_MASK 0x80
#define USB_DIR_OUT 0 /* to device */
#define USB_DIR_IN 0x80 /* to host */
+#define USB_DIR_MASK 0x80
/*
* USB types, the second of three bRequestType fields
#define USB_REQ_GET_INTERFACE 0x0A
#define USB_REQ_SET_INTERFACE 0x0B
#define USB_REQ_SYNCH_FRAME 0x0C
+#define USB_REQ_SET_SEL 0x30
+#define USB_REQ_SET_ISOCH_DELAY 0x31
#define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */
#define USB_REQ_GET_ENCRYPTION 0x0E
#define USB_REQ_LOOPBACK_DATA_READ 0x16
#define USB_REQ_SET_INTERFACE_DS 0x17
+/* specific requests for USB Power Delivery */
+#define USB_REQ_GET_PARTNER_PDO 20
+#define USB_REQ_GET_BATTERY_STATUS 21
+#define USB_REQ_SET_PDO 22
+#define USB_REQ_GET_VDM 23
+#define USB_REQ_SEND_VDM 24
+
/* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command,
* used by hubs to put ports into a new L1 suspend state, except that it
* forgot to define its number ...
#define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */
#define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */
+/*
+ * Test Mode Selectors
+ * See USB 2.0 spec Table 9-7
+ */
+#define USB_TEST_J 1
+#define USB_TEST_K 2
+#define USB_TEST_SE0_NAK 3
+#define USB_TEST_PACKET 4
+#define USB_TEST_FORCE_ENABLE 5
+
+/* Status Type */
+#define USB_STATUS_TYPE_STANDARD 0
+#define USB_STATUS_TYPE_PTM 1
+
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-7
+ */
+#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00
+/*
+ * Suspend Options, Table 9-8 USB 3.0 spec
+ */
+#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0))
+#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1))
+
+/*
+ * Interface status, Figure 9-5 USB 3.0 spec
+ */
+#define USB_INTRF_STAT_FUNC_RW_CAP 1
+#define USB_INTRF_STAT_FUNC_RW 2
+
#define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */
+
+/*
+ * Feature selectors from Table 9-8 USB Power Delivery spec
+ */
+#define USB_DEVICE_BATTERY_WAKE_MASK 40
+#define USB_DEVICE_OS_IS_PD_AWARE 41
+#define USB_DEVICE_POLICY_MODE 42
+#define USB_PORT_PR_SWAP 43
+#define USB_PORT_GOTO_MIN 44
+#define USB_PORT_RETURN_POWER 45
+#define USB_PORT_ACCEPT_PD_REQUEST 46
+#define USB_PORT_REJECT_PD_REQUEST 47
+#define USB_PORT_PORT_PD_RESET 48
+#define USB_PORT_C_PORT_PD_CHANGE 49
+#define USB_PORT_CABLE_PD_RESET 50
+#define USB_DEVICE_CHARGING_POLICY 54
/**
* struct usb_ctrlrequest - SETUP data for a USB device control request
* through the Linux-USB APIs, they are not converted to cpu byte
* order; it is the responsibility of the client code to do this.
* The single exception is when device and configuration descriptors (but
- * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD);
+ * not other descriptors) are read from character devices
+ * (i.e. /dev/bus/usb/BBB/DDD);
* in this case the fields are converted to host endianness by the kernel.
*/
#define USB_DT_WIRE_ADAPTER 0x21
#define USB_DT_RPIPE 0x22
#define USB_DT_CS_RADIO_CONTROL 0x23
+/* From the T10 UAS specification */
+#define USB_DT_PIPE_USAGE 0x24
/* From the USB 3.0 spec */
#define USB_DT_SS_ENDPOINT_COMP 0x30
+/* From the USB 3.1 spec */
+#define USB_DT_SSP_ISOC_ENDPOINT_COMP 0x31
/* Conventional codes for class-specific descriptors. The convention is
* defined in the USB "Common Class" Spec (3.11). Individual class specs
#define USB_CLASS_CONTENT_SEC 0x0d /* content security */
#define USB_CLASS_VIDEO 0x0e
#define USB_CLASS_WIRELESS_CONTROLLER 0xe0
+#define USB_CLASS_PERSONAL_HEALTHCARE 0x0f
+#define USB_CLASS_AUDIO_VIDEO 0x10
+#define USB_CLASS_BILLBOARD 0x11
+#define USB_CLASS_USB_TYPE_C_BRIDGE 0x12
#define USB_CLASS_MISC 0xef
#define USB_CLASS_APP_SPEC 0xfe
#define USB_CLASS_VENDOR_SPEC 0xff
/*-------------------------------------------------------------------------*/
+/* USB String descriptors can contain at most 126 characters. */
+#define USB_MAX_STRING_LEN 126
+
/* USB_DT_STRING: String descriptor */
struct usb_string_descriptor {
__u8 bLength;
#define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */
#define USB_ENDPOINT_DIR_MASK 0x80
-#define USB_ENDPOINT_SYNCTYPE 0x0c
-#define USB_ENDPOINT_SYNC_NONE (0 << 2)
-#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
-#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
-#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
-
#define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */
#define USB_ENDPOINT_XFER_CONTROL 0
#define USB_ENDPOINT_XFER_ISOC 1
#define USB_ENDPOINT_XFER_INT 3
#define USB_ENDPOINT_MAX_ADJUSTABLE 0x80
+#define USB_ENDPOINT_MAXP_MASK 0x07ff
+#define USB_EP_MAXP_MULT_SHIFT 11
+#define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT)
+#define USB_EP_MAXP_MULT(m) \
+ (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT)
+
+/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */
+#define USB_ENDPOINT_INTRTYPE 0x30
+#define USB_ENDPOINT_INTR_PERIODIC (0 << 4)
+#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4)
+
+#define USB_ENDPOINT_SYNCTYPE 0x0c
+#define USB_ENDPOINT_SYNC_NONE (0 << 2)
+#define USB_ENDPOINT_SYNC_ASYNC (1 << 2)
+#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2)
+#define USB_ENDPOINT_SYNC_SYNC (3 << 2)
+
+#define USB_ENDPOINT_USAGE_MASK 0x30
+#define USB_ENDPOINT_USAGE_DATA 0x00
+#define USB_ENDPOINT_USAGE_FEEDBACK 0x10
+#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */
+
/*-------------------------------------------------------------------------*/
/**
static inline int usb_endpoint_xfer_isoc(
const struct usb_endpoint_descriptor *epd)
{
- return (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
- USB_ENDPOINT_XFER_ISOC;
+ return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) ==
+ USB_ENDPOINT_XFER_ISOC);
}
/**
return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd);
}
+/**
+ * usb_endpoint_maxp - get endpoint's max packet size
+ * @epd: endpoint to be checked
+ *
+ * Returns @epd's max packet bits [10:0]
+ */
+static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd)
+{
+ return le16_to_cpu(epd->wMaxPacketSize) & USB_ENDPOINT_MAXP_MASK;
+}
+
+/**
+ * usb_endpoint_maxp_mult - get endpoint's transactional opportunities
+ * @epd: endpoint to be checked
+ *
+ * Return @epd's wMaxPacketSize[12:11] + 1
+ */
+static inline int
+usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd)
+{
+ int maxp = le16_to_cpu(epd->wMaxPacketSize);
+
+ return USB_EP_MAXP_MULT(maxp) + 1;
+}
+
+static inline int usb_endpoint_interrupt_type(
+ const struct usb_endpoint_descriptor *epd)
+{
+ return epd->bmAttributes & USB_ENDPOINT_INTRTYPE;
+}
+
+/*-------------------------------------------------------------------------*/
+
+/* USB_DT_SSP_ISOC_ENDPOINT_COMP: SuperSpeedPlus Isochronous Endpoint Companion
+ * descriptor
+ */
+struct usb_ssp_isoc_ep_comp_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __le16 wReseved;
+ __le32 dwBytesPerInterval;
+} __attribute__ ((packed));
+
+#define USB_DT_SSP_ISOC_EP_COMP_SIZE 8
+
/*-------------------------------------------------------------------------*/
/* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */
#define USB_DT_SS_EP_COMP_SIZE 6
+/* Bits 4:0 of bmAttributes if this is a bulk endpoint */
+static inline int
+usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp)
+{
+ int max_streams;
+
+ if (!comp)
+ return 0;
+
+ max_streams = comp->bmAttributes & 0x1f;
+
+ if (!max_streams)
+ return 0;
+
+ max_streams = 1 << max_streams;
+
+ return max_streams;
+}
+
+/* Bits 1:0 of bmAttributes if this is an isoc endpoint */
+#define USB_SS_MULT(p) (1 + ((p) & 0x3))
+/* Bit 7 of bmAttributes if a SSP isoc endpoint companion descriptor exists */
+#define USB_SS_SSP_ISOC_COMP(p) ((p) & (1 << 7))
+
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */
__u8 bmAttributes; /* support for HNP, SRP, etc */
} __attribute__ ((packed));
+/* USB_DT_OTG (from OTG 2.0 supplement) */
+struct usb_otg20_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+
+ __u8 bmAttributes; /* support for HNP, SRP and ADP, etc */
+ __le16 bcdOTG; /* OTG and EH supplement release number
+ * in binary-coded decimal(i.e. 2.0 is 0200H)
+ */
+} __attribute__ ((packed));
+
/* from usb_otg_descriptor.bmAttributes */
#define USB_OTG_SRP (1 << 0)
#define USB_OTG_HNP (1 << 1) /* swap host/device roles */
+#define USB_OTG_ADP (1 << 2) /* support ADP */
+#define OTG_STS_SELECTOR 0xF000 /* OTG status selector */
/*-------------------------------------------------------------------------*/
/* USB_DT_DEBUG: for special highspeed devices, replacing serial console */
__u8 iFunction;
} __attribute__ ((packed));
+#define USB_DT_INTERFACE_ASSOCIATION_SIZE 8
/*-------------------------------------------------------------------------*/
__u8 bNumDeviceCaps;
} __attribute__((packed));
+#define USB_DT_BOS_SIZE 5
/*-------------------------------------------------------------------------*/
/* USB_DT_DEVICE_CAPABILITY: grouped with BOS */
__u8 bReserved;
} __attribute__((packed));
+#define USB_DT_USB_WIRELESS_CAP_SIZE 11
+
+/* USB 2.0 Extension descriptor */
#define USB_CAP_TYPE_EXT 2
struct usb_ext_cap_descriptor { /* Link Power Management */
__u8 bLength;
__u8 bDescriptorType;
__u8 bDevCapabilityType;
- __u8 bmAttributes;
+ __le32 bmAttributes;
#define USB_LPM_SUPPORT (1 << 1) /* supports LPM */
+#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */
+#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/
+#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */
+#define USB_SET_BESL_BASELINE(p) (((p) & 0xf) << 8)
+#define USB_SET_BESL_DEEP(p) (((p) & 0xf) << 12)
+#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8)
+#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12)
+} __attribute__((packed));
+
+#define USB_DT_USB_EXT_CAP_SIZE 7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define USB_SS_CAP_TYPE 3
+struct usb_ss_cap_descriptor { /* Link Power Management */
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bmAttributes;
+#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */
+ __le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */
+ __u8 bFunctionalitySupport;
+ __u8 bU1devExitLat;
+ __le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE 10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define CONTAINER_ID_TYPE 4
+struct usb_ss_container_id_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 ContainerID[16]; /* 128-bit number */
} __attribute__((packed));
+#define USB_DT_USB_SS_CONTN_ID_SIZE 20
+
+/*
+ * SuperSpeed Plus USB Capability descriptor: Defines the set of
+ * SuperSpeed Plus USB specific device level capabilities
+ */
+#define USB_SSP_CAP_TYPE 0xa
+struct usb_ssp_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __le32 bmAttributes;
+#define USB_SSP_SUBLINK_SPEED_ATTRIBS (0x1f << 0) /* sublink speed entries */
+#define USB_SSP_SUBLINK_SPEED_IDS (0xf << 5) /* speed ID entries */
+ __le16 wFunctionalitySupport;
+#define USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID (0xf)
+#define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8)
+#define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12)
+ __le16 wReserved;
+ __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */
+#define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */
+#define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */
+#define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */
+#define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */
+#define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */
+#define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */
+} __attribute__((packed));
+
+/*
+ * USB Power Delivery Capability Descriptor:
+ * Defines capabilities for PD
+ */
+/* Defines the various PD Capabilities of this device */
+#define USB_PD_POWER_DELIVERY_CAPABILITY 0x06
+/* Provides information on each battery supported by the device */
+#define USB_PD_BATTERY_INFO_CAPABILITY 0x07
+/* The Consumer characteristics of a Port on the device */
+#define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08
+/* The provider characteristics of a Port on the device */
+#define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09
+
+struct usb_pd_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */
+ __u8 bReserved;
+ __le32 bmAttributes;
+#define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */
+#define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */
+#define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */
+#define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */
+#define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */
+#define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */
+
+#define USB_PD_CAP_PWR_AC (1 << 8)
+#define USB_PD_CAP_PWR_BAT (1 << 9)
+#define USB_PD_CAP_PWR_USE_V_BUS (1 << 14)
+
+ __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */
+ __le16 bmConsumerPorts;
+ __le16 bcdBCVersion;
+ __le16 bcdPDVersion;
+ __le16 bcdUSBTypeCVersion;
+} __attribute__((packed));
+
+struct usb_pd_cap_battery_info_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ /* Index of string descriptor shall contain the user friendly name for this battery */
+ __u8 iBattery;
+ /* Index of string descriptor shall contain the Serial Number String for this battery */
+ __u8 iSerial;
+ __u8 iManufacturer;
+ __u8 bBatteryId; /* uniquely identifies this battery in status Messages */
+ __u8 bReserved;
+ /*
+ * Shall contain the Battery Charge value above which this
+ * battery is considered to be fully charged but not necessarily
+ * “topped off.”
+ */
+ __le32 dwChargedThreshold; /* in mWh */
+ /*
+ * Shall contain the minimum charge level of this battery such
+ * that above this threshold, a device can be assured of being
+ * able to power up successfully (see Battery Charging 1.2).
+ */
+ __le32 dwWeakThreshold; /* in mWh */
+ __le32 dwBatteryDesignCapacity; /* in mWh */
+ __le32 dwBatteryLastFullchargeCapacity; /* in mWh */
+} __attribute__((packed));
+
+struct usb_pd_cap_consumer_port_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved;
+ __u8 bmCapabilities;
+/* port will oerate under: */
+#define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */
+#define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */
+#define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */
+ __le16 wMinVoltage; /* in 50mV units */
+ __le16 wMaxVoltage; /* in 50mV units */
+ __u16 wReserved;
+ __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */
+ __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */
+ __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */
+#define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff
+} __attribute__((packed));
+
+struct usb_pd_cap_provider_port_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+ __u8 bReserved1;
+ __u8 bmCapabilities;
+/* port will oerate under: */
+#define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */
+#define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */
+#define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */
+ __u8 bNumOfPDObjects;
+ __u8 bReserved2;
+ __le32 wPowerDataObject[];
+} __attribute__((packed));
+
+/*
+ * Precision time measurement capability descriptor: advertised by devices and
+ * hubs that support PTM
+ */
+#define USB_PTM_CAP_TYPE 0xb
+struct usb_ptm_cap_descriptor {
+ __u8 bLength;
+ __u8 bDescriptorType;
+ __u8 bDevCapabilityType;
+} __attribute__((packed));
+
+#define USB_DT_USB_PTM_ID_SIZE 3
+/*
+ * The size of the descriptor for the Sublink Speed Attribute Count
+ * (SSAC) specified in bmAttributes[4:0]. SSAC is zero-based
+ */
+#define USB_DT_USB_SSP_CAP_SIZE(ssac) (12 + (ssac + 1) * 4)
+
/*-------------------------------------------------------------------------*/
/* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with
USB_SPEED_HIGH, /* usb 2.0 */
USB_SPEED_WIRELESS, /* wireless (usb 2.5) */
USB_SPEED_SUPER, /* usb 3.0 */
+ USB_SPEED_SUPER_PLUS, /* usb 3.1 */
};
+
enum usb_device_state {
/* NOTATTACHED isn't in the USB spec, and this state acts
* the same as ATTACHED ... but it's clearer this way.
*/
};
+enum usb3_link_state {
+ USB3_LPM_U0 = 0,
+ USB3_LPM_U1,
+ USB3_LPM_U2,
+ USB3_LPM_U3
+};
+
+/*
+ * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1.
+ * 0xff means the parent hub will accept transitions to U1, but will not
+ * initiate a transition.
+ *
+ * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to
+ * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved
+ * values.
+ *
+ * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2.
+ * 0xff means the parent hub will accept transitions to U2, but will not
+ * initiate a transition.
+ *
+ * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to
+ * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2
+ * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means
+ * 65.024ms.
+ */
+#define USB3_LPM_DISABLED 0x0
+#define USB3_LPM_U1_MAX_TIMEOUT 0x7F
+#define USB3_LPM_U2_MAX_TIMEOUT 0xFE
+#define USB3_LPM_DEVICE_INITIATED 0xFF
+
+struct usb_set_sel_req {
+ __u8 u1_sel;
+ __u8 u1_pel;
+ __le16 u2_sel;
+ __le16 u2_pel;
+} __attribute__ ((packed));
+
+/*
+ * The Set System Exit Latency control transfer provides one byte each for
+ * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each
+ * are two bytes long.
+ */
+#define USB3_LPM_MAX_U1_SEL_PEL 0xFF
+#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF
+
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * https://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW 100
+
#endif /* __LINUX_USB_CH9_H */
+/* SPDX-License-Identifier: GPL-2.0-only */
/*
* IEEE 802.11 defines
*
* Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
* Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
* Copyright (c) 2016 - 2017 Intel Deutschland GmbH
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
+ * Copyright (c) 2018 - 2023 Intel Corporation
*/
#ifndef __LINUX_IEEE80211_H
#define IEEE80211_STYPE_ACTION 0x00D0
/* control */
+#define IEEE80211_STYPE_TRIGGER 0x0020
#define IEEE80211_STYPE_CTL_EXT 0x0060
#define IEEE80211_STYPE_BACK_REQ 0x0080
#define IEEE80211_STYPE_BACK 0x0090
/* extension, added by 802.11ad */
#define IEEE80211_STYPE_DMG_BEACON 0x0000
+#define IEEE80211_STYPE_S1G_BEACON 0x0010
+
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100
+
+/* see 802.11ah-2016 9.9 NDP CMAC frames */
+#define IEEE80211_S1G_1MHZ_NDP_BITS 25
+#define IEEE80211_S1G_1MHZ_NDP_BYTES 4
+#define IEEE80211_S1G_2MHZ_NDP_BITS 37
+#define IEEE80211_S1G_2MHZ_NDP_BYTES 5
+
+#define IEEE80211_NDP_FTYPE_CTS 0
+#define IEEE80211_NDP_FTYPE_CF_END 0
+#define IEEE80211_NDP_FTYPE_PS_POLL 1
+#define IEEE80211_NDP_FTYPE_ACK 2
+#define IEEE80211_NDP_FTYPE_PS_POLL_ACK 3
+#define IEEE80211_NDP_FTYPE_BA 4
+#define IEEE80211_NDP_FTYPE_BF_REPORT_POLL 5
+#define IEEE80211_NDP_FTYPE_PAGING 6
+#define IEEE80211_NDP_FTYPE_PREQ 7
+
+#define SM64(f, v) ((((u64)v) << f##_S) & f)
+
+/* NDP CMAC frame fields */
+#define IEEE80211_NDP_FTYPE 0x0000000000000007
+#define IEEE80211_NDP_FTYPE_S 0x0000000000000000
+
+/* 1M Probe Request 11ah 9.9.3.1.1 */
+#define IEEE80211_NDP_1M_PREQ_ANO 0x0000000000000008
+#define IEEE80211_NDP_1M_PREQ_ANO_S 3
+#define IEEE80211_NDP_1M_PREQ_CSSID 0x00000000000FFFF0
+#define IEEE80211_NDP_1M_PREQ_CSSID_S 4
+#define IEEE80211_NDP_1M_PREQ_RTYPE 0x0000000000100000
+#define IEEE80211_NDP_1M_PREQ_RTYPE_S 20
+#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000
+#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000
+/* 2M Probe Request 11ah 9.9.3.1.2 */
+#define IEEE80211_NDP_2M_PREQ_ANO 0x0000000000000008
+#define IEEE80211_NDP_2M_PREQ_ANO_S 3
+#define IEEE80211_NDP_2M_PREQ_CSSID 0x0000000FFFFFFFF0
+#define IEEE80211_NDP_2M_PREQ_CSSID_S 4
+#define IEEE80211_NDP_2M_PREQ_RTYPE 0x0000001000000000
+#define IEEE80211_NDP_2M_PREQ_RTYPE_S 36
+
+#define IEEE80211_ANO_NETTYPE_WILD 15
+
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100
/* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
#define IEEE80211_CTL_EXT_POLL 0x2000
#define IEEE80211_MAX_SN IEEE80211_SN_MASK
#define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1)
+
+/* PV1 Layout 11ah 9.8.3.1 */
+#define IEEE80211_PV1_FCTL_VERS 0x0003
+#define IEEE80211_PV1_FCTL_FTYPE 0x001c
+#define IEEE80211_PV1_FCTL_STYPE 0x00e0
+#define IEEE80211_PV1_FCTL_TODS 0x0100
+#define IEEE80211_PV1_FCTL_MOREFRAGS 0x0200
+#define IEEE80211_PV1_FCTL_PM 0x0400
+#define IEEE80211_PV1_FCTL_MOREDATA 0x0800
+#define IEEE80211_PV1_FCTL_PROTECTED 0x1000
+#define IEEE80211_PV1_FCTL_END_SP 0x2000
+#define IEEE80211_PV1_FCTL_RELAYED 0x4000
+#define IEEE80211_PV1_FCTL_ACK_POLICY 0x8000
+#define IEEE80211_PV1_FCTL_CTL_EXT 0x0f00
+
static inline bool ieee80211_sn_less(u16 sn1, u16 sn2)
{
return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1);
#define IEEE80211_MAX_FRAG_THRESHOLD 2352
#define IEEE80211_MAX_RTS_THRESHOLD 2353
#define IEEE80211_MAX_AID 2007
+#define IEEE80211_MAX_AID_S1G 8191
#define IEEE80211_MAX_TIM_LEN 251
#define IEEE80211_MAX_MESH_PEERINGS 63
/* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
#define IEEE80211_HT_CTL_LEN 4
+/* trigger type within common_info of trigger frame */
+#define IEEE80211_TRIGGER_TYPE_MASK 0xf
+#define IEEE80211_TRIGGER_TYPE_BASIC 0x0
+#define IEEE80211_TRIGGER_TYPE_BFRP 0x1
+#define IEEE80211_TRIGGER_TYPE_MU_BAR 0x2
+#define IEEE80211_TRIGGER_TYPE_MU_RTS 0x3
+#define IEEE80211_TRIGGER_TYPE_BSRP 0x4
+#define IEEE80211_TRIGGER_TYPE_GCR_MU_BAR 0x5
+#define IEEE80211_TRIGGER_TYPE_BQRP 0x6
+#define IEEE80211_TRIGGER_TYPE_NFRP 0x7
+
struct ieee80211_hdr {
__le16 frame_control;
__le16 duration_id;
} __packed __aligned(2);
struct ieee80211_hdr_3addr {
+ __le16 frame_control;
+ __le16 duration_id;
+ struct_group(addrs,
+ u8 addr1[6];
+ u8 addr2[6];
+ u8 addr3[6];
+ );
+ __le16 seq_ctrl;
+} __packed __aligned(2);
+
+struct ieee80211_qos_hdr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[6];
u8 addr2[6];
u8 addr3[6];
__le16 seq_ctrl;
+ __le16 qos_ctrl;
} __packed __aligned(2);
-struct ieee80211_qos_hdr {
+struct ieee80211_qos_hdr_4addr {
__le16 frame_control;
__le16 duration_id;
u8 addr1[6];
u8 addr2[6];
u8 addr3[6];
__le16 seq_ctrl;
+ u8 addr4[6];
__le16 qos_ctrl;
} __packed __aligned(2);
+struct ieee80211_trigger {
+ __le16 frame_control;
+ __le16 duration;
+ u8 ra[6];
+ u8 ta[6];
+ __le64 common_info;
+ u8 variable[];
+} __packed __aligned(2);
+
/**
* ieee80211_has_tods - check if IEEE80211_FCTL_TODS is set
* @fc: frame control bytes in little-endian byteorder
cpu_to_le16(IEEE80211_FTYPE_DATA);
}
+/**
+ * ieee80211_is_ext - check if type is IEEE80211_FTYPE_EXT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_ext(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_EXT);
+}
+
+
/**
* ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
* @fc: frame control bytes in little-endian byteorder
cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON);
}
+/**
+ * ieee80211_is_s1g_beacon - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_beacon(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE |
+ IEEE80211_FCTL_STYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON);
+}
+
+/**
+ * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_next_tbtt_present(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) &&
+ fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT);
+}
+
+/**
+ * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only
+ * true for S1G beacons when they're short.
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_short_beacon(__le16 fc)
+{
+ return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc);
+}
+
/**
* ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
* @fc: frame control bytes in little-endian byteorder
}
/**
- * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
+ * ieee80211_is_trigger - check if frame is trigger frame
* @fc: frame control field in little-endian byteorder
*/
-static inline bool ieee80211_is_bufferable_mmpdu(__le16 fc)
+static inline bool ieee80211_is_trigger(__le16 fc)
+{
+ return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) ==
+ cpu_to_le16(IEEE80211_FTYPE_CTL | IEEE80211_STYPE_TRIGGER);
+}
+
+/**
+ * ieee80211_is_any_nullfunc - check if frame is regular or QoS nullfunc frame
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_any_nullfunc(__le16 fc)
{
- /* IEEE 802.11-2012, definition of "bufferable management frame";
- * note that this ignores the IBSS special case. */
- return ieee80211_is_mgmt(fc) &&
- (ieee80211_is_action(fc) ||
- ieee80211_is_disassoc(fc) ||
- ieee80211_is_deauth(fc));
+ return (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc));
}
/**
u8 token;
u8 mode;
u8 type;
- u8 request[0];
+ u8 request[];
} __packed;
/**
IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20,
};
+#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1
+
/**
* mesh channel switch parameters element's flag indicator
*
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width
* @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width
+ * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag
* @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask
* (the NSS value is the value of this field + 1)
* @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift
* using a beamforming steering matrix
*/
enum ieee80211_vht_opmode_bits {
- IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3,
+ IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 0x03,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2,
IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3,
+ IEEE80211_OPMODE_NOTIF_BW_160_80P80 = 0x04,
IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70,
IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4,
IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80,
};
+/**
+ * enum ieee80211_s1g_chanwidth
+ * These are defined in IEEE802.11-2016ah Table 10-20
+ * as BSS Channel Width
+ *
+ * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel
+ * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel
+ */
+enum ieee80211_s1g_chanwidth {
+ IEEE80211_S1G_CHANWIDTH_1MHZ = 0,
+ IEEE80211_S1G_CHANWIDTH_2MHZ = 1,
+ IEEE80211_S1G_CHANWIDTH_4MHZ = 3,
+ IEEE80211_S1G_CHANWIDTH_8MHZ = 7,
+ IEEE80211_S1G_CHANWIDTH_16MHZ = 15,
+};
+
#define WLAN_SA_QUERY_TR_ID_LEN 2
#define WLAN_MEMBERSHIP_LEN 8
#define WLAN_USER_POSITION_LEN 16
u8 link_margin;
} __packed;
+#define IEEE80211_ADDBA_EXT_FRAG_LEVEL_MASK GENMASK(2, 1)
+#define IEEE80211_ADDBA_EXT_FRAG_LEVEL_SHIFT 1
+#define IEEE80211_ADDBA_EXT_NO_FRAG BIT(0)
+#define IEEE80211_ADDBA_EXT_BUF_SIZE_MASK GENMASK(7, 5)
+#define IEEE80211_ADDBA_EXT_BUF_SIZE_SHIFT 10
+
+struct ieee80211_addba_ext_ie {
+ u8 data;
+} __packed;
+
+/**
+ * struct ieee80211_s1g_bcn_compat_ie
+ *
+ * S1G Beacon Compatibility element
+ */
+struct ieee80211_s1g_bcn_compat_ie {
+ __le16 compat_info;
+ __le16 beacon_int;
+ __le32 tsf_completion;
+} __packed;
+
+/**
+ * struct ieee80211_s1g_oper_ie
+ *
+ * S1G Operation element
+ */
+struct ieee80211_s1g_oper_ie {
+ u8 ch_width;
+ u8 oper_class;
+ u8 primary_ch;
+ u8 oper_ch;
+ __le16 basic_mcs_nss;
+} __packed;
+
+/**
+ * struct ieee80211_aid_response_ie
+ *
+ * AID Response element
+ */
+struct ieee80211_aid_response_ie {
+ __le16 aid;
+ u8 switch_count;
+ __le16 response_int;
+} __packed;
+
+struct ieee80211_s1g_cap {
+ u8 capab_info[10];
+ u8 supp_mcs_nss[5];
+} __packed;
+
+struct ieee80211_ext {
+ __le16 frame_control;
+ __le16 duration;
+ union {
+ struct {
+ u8 sa[6];
+ __le32 timestamp;
+ u8 change_seq;
+ u8 variable[0];
+ } __packed s1g_beacon;
+ struct {
+ u8 sa[6];
+ __le32 timestamp;
+ u8 change_seq;
+ u8 next_tbtt[3];
+ u8 variable[0];
+ } __packed s1g_short_beacon;
+ } u;
+} __packed __aligned(2);
+
+#define IEEE80211_TWT_CONTROL_NDP BIT(0)
+#define IEEE80211_TWT_CONTROL_RESP_MODE BIT(1)
+#define IEEE80211_TWT_CONTROL_NEG_TYPE_BROADCAST BIT(3)
+#define IEEE80211_TWT_CONTROL_RX_DISABLED BIT(4)
+#define IEEE80211_TWT_CONTROL_WAKE_DUR_UNIT BIT(5)
+
+#define IEEE80211_TWT_REQTYPE_REQUEST BIT(0)
+#define IEEE80211_TWT_REQTYPE_SETUP_CMD GENMASK(3, 1)
+#define IEEE80211_TWT_REQTYPE_TRIGGER BIT(4)
+#define IEEE80211_TWT_REQTYPE_IMPLICIT BIT(5)
+#define IEEE80211_TWT_REQTYPE_FLOWTYPE BIT(6)
+#define IEEE80211_TWT_REQTYPE_FLOWID GENMASK(9, 7)
+#define IEEE80211_TWT_REQTYPE_WAKE_INT_EXP GENMASK(14, 10)
+#define IEEE80211_TWT_REQTYPE_PROTECTION BIT(15)
+
+enum ieee80211_twt_setup_cmd {
+ TWT_SETUP_CMD_REQUEST,
+ TWT_SETUP_CMD_SUGGEST,
+ TWT_SETUP_CMD_DEMAND,
+ TWT_SETUP_CMD_GROUPING,
+ TWT_SETUP_CMD_ACCEPT,
+ TWT_SETUP_CMD_ALTERNATE,
+ TWT_SETUP_CMD_DICTATE,
+ TWT_SETUP_CMD_REJECT,
+};
+
+struct ieee80211_twt_params {
+ __le16 req_type;
+ __le64 twt;
+ u8 min_twt_dur;
+ __le16 mantissa;
+ u8 channel;
+} __packed;
+
+struct ieee80211_twt_setup {
+ u8 dialog_token;
+ u8 element_id;
+ u8 length;
+ u8 control;
+ u8 params[];
+} __packed;
+
struct ieee80211_mgmt {
__le16 frame_control;
__le16 duration;
__le16 auth_transaction;
__le16 status_code;
/* possibly followed by Challenge text */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) auth;
struct {
__le16 reason_code;
__le16 capab_info;
__le16 listen_interval;
/* followed by SSID and Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) assoc_req;
struct {
__le16 capab_info;
__le16 status_code;
__le16 aid;
/* followed by Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) assoc_resp, reassoc_resp;
+ struct {
+ __le16 capab_info;
+ __le16 status_code;
+ u8 variable[];
+ } __packed __aligned(4) s1g_assoc_resp, s1g_reassoc_resp;
struct {
__le16 capab_info;
__le16 listen_interval;
u8 current_ap[6];
/* followed by SSID and Supported rates */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) reassoc_req;
struct {
__le16 reason_code;
__le16 capab_info;
/* followed by some of SSID, Supported rates,
* FH Params, DS Params, CF Params, IBSS Params, TIM */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) beacon;
struct {
/* only variable items: SSID, Supported rates */
- u8 variable[0];
+ DECLARE_FLEX_ARRAY(u8, variable);
} __packed __aligned(4) probe_req;
struct {
__le64 timestamp;
__le16 capab_info;
/* followed by some of SSID, Supported rates,
* FH Params, DS Params, CF Params, IBSS Params */
- u8 variable[0];
+ u8 variable[];
} __packed __aligned(4) probe_resp;
struct {
u8 category;
u8 action_code;
u8 dialog_token;
u8 status_code;
- u8 variable[0];
+ u8 variable[];
} __packed wme_action;
struct{
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed chan_switch;
struct{
u8 action_code;
struct ieee80211_ext_chansw_ie data;
- u8 variable[0];
+ u8 variable[];
} __packed ext_chan_switch;
struct{
u8 action_code;
__le16 capab;
__le16 timeout;
__le16 start_seq_num;
+ /* followed by BA Extension */
+ u8 variable[];
} __packed addba_req;
struct{
u8 action_code;
} __packed delba;
struct {
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed self_prot;
struct{
u8 action_code;
- u8 variable[0];
+ u8 variable[];
} __packed mesh_action;
struct {
u8 action;
u8 toa[6];
__le16 tod_error;
__le16 toa_error;
- u8 variable[0];
+ u8 variable[];
} __packed ftm;
+ struct {
+ u8 action_code;
+ u8 variable[];
+ } __packed s1g;
+ struct {
+ u8 action_code;
+ u8 dialog_token;
+ u8 follow_up;
+ u32 tod;
+ u32 toa;
+ u8 max_tod_error;
+ u8 max_toa_error;
+ } __packed wnm_timing_msr;
} u;
} __packed __aligned(4) action;
+ DECLARE_FLEX_ARRAY(u8, body); /* Generic frame body */
} u __aligned(2);
} __packed __aligned(2);
/* Supported rates membership selectors */
#define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127
#define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126
+#define BSS_MEMBERSHIP_SELECTOR_HE_PHY 122
+#define BSS_MEMBERSHIP_SELECTOR_SAE_H2E 123
/* mgmt header + 1 byte category code */
#define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
/*
- * A-PMDU buffer sizes
- * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ * A-MPDU buffer sizes
+ * According to HT size varies from 8 to 64 frames
+ * HE adds the ability to have up to 256 frames.
+ * EHT adds the ability to have up to 1K frames.
*/
-#define IEEE80211_MIN_AMPDU_BUF 0x8
-#define IEEE80211_MAX_AMPDU_BUF 0x40
+#define IEEE80211_MIN_AMPDU_BUF 0x8
+#define IEEE80211_MAX_AMPDU_BUF_HT 0x40
+#define IEEE80211_MAX_AMPDU_BUF_HE 0x100
+#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400
/* Spatial Multiplexing Power Save Modes (for capability) */
* STA can receive. Rate expressed in units of 1 Mbps.
* If this field is 0 this value should not be used to
* consider the highest RX data rate supported.
- * The top 3 bits of this field are reserved.
+ * The top 3 bits of this field indicate the Maximum NSTS,total
+ * (a beamformee capability.)
* @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
* @tx_highest: Indicates highest long GI VHT PPDU data rate
* STA can transmit. Rate expressed in units of 1 Mbps.
* If this field is 0 this value should not be used to
* consider the highest TX data rate supported.
- * The top 3 bits of this field are reserved.
+ * The top 2 bits of this field are reserved, the
+ * 3rd bit from the top indiciates VHT Extended NSS BW
+ * Capability.
*/
struct ieee80211_vht_mcs_info {
__le16 rx_mcs_map;
__le16 tx_highest;
} __packed;
+/* for rx_highest */
+#define IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT 13
+#define IEEE80211_VHT_MAX_NSTS_TOTAL_MASK (7 << IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT)
+
+/* for tx_highest */
+#define IEEE80211_VHT_EXT_NSS_BW_CAPABLE (1 << 13)
+
/**
* enum ieee80211_vht_mcs_support - VHT MCS support definitions
* @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
__le16 basic_mcs_set;
} __packed;
+/**
+ * struct ieee80211_he_cap_elem - HE capabilities element
+ *
+ * This structure is the "HE capabilities element" fixed fields as
+ * described in P802.11ax_D4.0 section 9.4.2.242.2 and 9.4.2.242.3
+ */
+struct ieee80211_he_cap_elem {
+ u8 mac_cap_info[6];
+ u8 phy_cap_info[11];
+} __packed;
+
+#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5
+
+/**
+ * enum ieee80211_he_mcs_support - HE MCS support definitions
+ * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
+ * number of streams
+ * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported
+ * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported
+ * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported
+ *
+ * These definitions are used in each 2-bit subfield of the rx_mcs_*
+ * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are
+ * both split into 8 subfields by number of streams. These values indicate
+ * which MCSes are supported for the number of streams the value appears
+ * for.
+ */
+enum ieee80211_he_mcs_support {
+ IEEE80211_HE_MCS_SUPPORT_0_7 = 0,
+ IEEE80211_HE_MCS_SUPPORT_0_9 = 1,
+ IEEE80211_HE_MCS_SUPPORT_0_11 = 2,
+ IEEE80211_HE_MCS_NOT_SUPPORTED = 3,
+};
+
+/**
+ * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field
+ *
+ * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field
+ * described in P802.11ax_D2.0 section 9.4.2.237.4
+ *
+ * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel
+ * widths less than 80MHz.
+ * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel
+ * widths less than 80MHz.
+ * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel
+ * width 160MHz.
+ * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel
+ * width 160MHz.
+ * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for
+ * channel width 80p80MHz.
+ * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for
+ * channel width 80p80MHz.
+ */
+struct ieee80211_he_mcs_nss_supp {
+ __le16 rx_mcs_80;
+ __le16 tx_mcs_80;
+ __le16 rx_mcs_160;
+ __le16 tx_mcs_160;
+ __le16 rx_mcs_80p80;
+ __le16 tx_mcs_80p80;
+} __packed;
+
+/**
+ * struct ieee80211_he_operation - HE capabilities element
+ *
+ * This structure is the "HE operation element" fields as
+ * described in P802.11ax_D4.0 section 9.4.2.243
+ */
+struct ieee80211_he_operation {
+ __le32 he_oper_params;
+ __le16 he_mcs_nss_set;
+ /* Optional 0,1,3,4,5,7 or 8 bytes: depends on @he_oper_params */
+ u8 optional[];
+} __packed;
+
+/**
+ * struct ieee80211_he_spr - HE spatial reuse element
+ *
+ * This structure is the "HE spatial reuse element" element as
+ * described in P802.11ax_D4.0 section 9.4.2.241
+ */
+struct ieee80211_he_spr {
+ u8 he_sr_control;
+ /* Optional 0 to 19 bytes: depends on @he_sr_control */
+ u8 optional[];
+} __packed;
+
+/**
+ * struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field
+ *
+ * This structure is the "MU AC Parameter Record" fields as
+ * described in P802.11ax_D4.0 section 9.4.2.245
+ */
+struct ieee80211_he_mu_edca_param_ac_rec {
+ u8 aifsn;
+ u8 ecw_min_max;
+ u8 mu_edca_timer;
+} __packed;
+
+/**
+ * struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element
+ *
+ * This structure is the "MU EDCA Parameter Set element" fields as
+ * described in P802.11ax_D4.0 section 9.4.2.245
+ */
+struct ieee80211_mu_edca_param_set {
+ u8 mu_qos_info;
+ struct ieee80211_he_mu_edca_param_ac_rec ac_be;
+ struct ieee80211_he_mu_edca_param_ac_rec ac_bk;
+ struct ieee80211_he_mu_edca_param_ac_rec ac_vi;
+ struct ieee80211_he_mu_edca_param_ac_rec ac_vo;
+} __packed;
+
+#define IEEE80211_EHT_MCS_NSS_RX 0x0f
+#define IEEE80211_EHT_MCS_NSS_TX 0xf0
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_20mhz_only - EHT 20MHz only station max
+ * supported NSS for per MCS.
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs7_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 0 - 7.
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 8 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_20mhz_only {
+ u8 rx_tx_mcs7_max_nss;
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_mcs_nss_supp_bw - EHT max supported NSS per MCS (except
+ * 20MHz only stations).
+ *
+ * For each field below, bits 0 - 3 indicate the maximal number of spatial
+ * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams
+ * for Tx.
+ *
+ * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 0 - 9.
+ * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 10 - 11.
+ * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams
+ * supported for reception and the maximum number of spatial streams
+ * supported for transmission for MCS 12 - 13.
+ */
+struct ieee80211_eht_mcs_nss_supp_bw {
+ u8 rx_tx_mcs9_max_nss;
+ u8 rx_tx_mcs11_max_nss;
+ u8 rx_tx_mcs13_max_nss;
+};
+
+/**
+ * struct ieee80211_eht_cap_elem_fixed - EHT capabilities fixed data
+ *
+ * This structure is the "EHT Capabilities element" fixed fields as
+ * described in P802.11be_D2.0 section 9.4.2.313.
+ *
+ * @mac_cap_info: MAC capabilities, see IEEE80211_EHT_MAC_CAP*
+ * @phy_cap_info: PHY capabilities, see IEEE80211_EHT_PHY_CAP*
+ */
+struct ieee80211_eht_cap_elem_fixed {
+ u8 mac_cap_info[2];
+ u8 phy_cap_info[9];
+} __packed;
+
+/**
+ * struct ieee80211_eht_cap_elem - EHT capabilities element
+ * @fixed: fixed parts, see &ieee80211_eht_cap_elem_fixed
+ * @optional: optional parts
+ */
+struct ieee80211_eht_cap_elem {
+ struct ieee80211_eht_cap_elem_fixed fixed;
+
+ /*
+ * Followed by:
+ * Supported EHT-MCS And NSS Set field: 4, 3, 6 or 9 octets.
+ * EHT PPE Thresholds field: variable length.
+ */
+ u8 optional[];
+} __packed;
+
+#define IEEE80211_EHT_OPER_INFO_PRESENT 0x01
+#define IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT 0x02
+#define IEEE80211_EHT_OPER_EHT_DEF_PE_DURATION 0x04
+#define IEEE80211_EHT_OPER_GROUP_ADDRESSED_BU_IND_LIMIT 0x08
+#define IEEE80211_EHT_OPER_GROUP_ADDRESSED_BU_IND_EXP_MASK 0x30
+
+/**
+ * struct ieee80211_eht_operation - eht operation element
+ *
+ * This structure is the "EHT Operation Element" fields as
+ * described in P802.11be_D2.0 section 9.4.2.311
+ *
+ * @params: EHT operation element parameters. See &IEEE80211_EHT_OPER_*
+ * @basic_mcs_nss: indicates the EHT-MCSs for each number of spatial streams in
+ * EHT PPDUs that are supported by all EHT STAs in the BSS in transmit and
+ * receive.
+ * @optional: optional parts
+ */
+struct ieee80211_eht_operation {
+ u8 params;
+ __le32 basic_mcs_nss;
+ u8 optional[];
+} __packed;
+
+/**
+ * struct ieee80211_eht_operation_info - eht operation information
+ *
+ * @control: EHT operation information control.
+ * @ccfs0: defines a channel center frequency for a 20, 40, 80, 160, or 320 MHz
+ * EHT BSS.
+ * @ccfs1: defines a channel center frequency for a 160 or 320 MHz EHT BSS.
+ * @optional: optional parts
+ */
+struct ieee80211_eht_operation_info {
+ u8 control;
+ u8 ccfs0;
+ u8 ccfs1;
+ u8 optional[];
+} __packed;
/* 802.11ac VHT Capabilities */
#define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000
#define IEEE80211_VHT_CAP_MAX_MPDU_MASK 0x00000003
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004
#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C
+#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_SHIFT 2
#define IEEE80211_VHT_CAP_RXLDPC 0x00000010
#define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020
#define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040
#define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300
#define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400
#define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700
+#define IEEE80211_VHT_CAP_RXSTBC_SHIFT 8
#define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800
#define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000
#define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13
#define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000
#define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000
#define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000
+#define IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT 30
+#define IEEE80211_VHT_CAP_EXT_NSS_BW_MASK 0xc0000000
+
+/**
+ * ieee80211_get_vht_max_nss - return max NSS for a given bandwidth/MCS
+ * @cap: VHT capabilities of the peer
+ * @bw: bandwidth to use
+ * @mcs: MCS index to use
+ * @ext_nss_bw_capable: indicates whether or not the local transmitter
+ * (rate scaling algorithm) can deal with the new logic
+ * (dot11VHTExtendedNSSBWCapable)
+ * @max_vht_nss: current maximum NSS as advertised by the STA in
+ * operating mode notification, can be 0 in which case the
+ * capability data will be used to derive this (from MCS support)
+ *
+ * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can
+ * vary for a given BW/MCS. This function parses the data.
+ *
+ * Note: This function is exported by cfg80211.
+ */
+int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
+ enum ieee80211_vht_chanwidth bw,
+ int mcs, bool ext_nss_bw_capable,
+ unsigned int max_vht_nss);
+
+/**
+ * enum ieee80211_ap_reg_power - regulatory power for a Access Point
+ *
+ * @IEEE80211_REG_UNSET_AP: Access Point has no regulatory power mode
+ * @IEEE80211_REG_LPI: Indoor Access Point
+ * @IEEE80211_REG_SP: Standard power Access Point
+ * @IEEE80211_REG_VLP: Very low power Access Point
+ * @IEEE80211_REG_AP_POWER_AFTER_LAST: internal
+ * @IEEE80211_REG_AP_POWER_MAX: maximum value
+ */
+enum ieee80211_ap_reg_power {
+ IEEE80211_REG_UNSET_AP,
+ IEEE80211_REG_LPI_AP,
+ IEEE80211_REG_SP_AP,
+ IEEE80211_REG_VLP_AP,
+ IEEE80211_REG_AP_POWER_AFTER_LAST,
+ IEEE80211_REG_AP_POWER_MAX =
+ IEEE80211_REG_AP_POWER_AFTER_LAST - 1,
+};
+
+/**
+ * enum ieee80211_client_reg_power - regulatory power for a client
+ *
+ * @IEEE80211_REG_UNSET_CLIENT: Client has no regulatory power mode
+ * @IEEE80211_REG_DEFAULT_CLIENT: Default Client
+ * @IEEE80211_REG_SUBORDINATE_CLIENT: Subordinate Client
+ * @IEEE80211_REG_CLIENT_POWER_AFTER_LAST: internal
+ * @IEEE80211_REG_CLIENT_POWER_MAX: maximum value
+ */
+enum ieee80211_client_reg_power {
+ IEEE80211_REG_UNSET_CLIENT,
+ IEEE80211_REG_DEFAULT_CLIENT,
+ IEEE80211_REG_SUBORDINATE_CLIENT,
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST,
+ IEEE80211_REG_CLIENT_POWER_MAX =
+ IEEE80211_REG_CLIENT_POWER_AFTER_LAST - 1,
+};
+
+/* 802.11ax HE MAC capabilities */
+#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01
+#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02
+#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0
+
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_1 0x00
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_2 0x10
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_3 0x20
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_4 0x30
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_5 0x40
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_6 0x50
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_7 0x60
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8 0x70
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_MASK 0x70
+
+/* Link adaptation is split between byte HE_MAC_CAP1 and
+ * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE
+ * in which case the following values apply:
+ * 0 = No feedback.
+ * 1 = reserved.
+ * 2 = Unsolicited feedback.
+ * 3 = both
+ */
+#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80
+
+#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01
+#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02
+#define IEEE80211_HE_MAC_CAP2_TRS 0x04
+#define IEEE80211_HE_MAC_CAP2_BSR 0x08
+#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10
+#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20
+#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40
+#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80
+
+#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02
+#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04
+
+/* The maximum length of an A-MDPU is defined by the combination of the Maximum
+ * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the
+ * same field in the HE capabilities.
+ */
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_0 0x00
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_1 0x08
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2 0x10
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3 0x18
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK 0x18
+#define IEEE80211_HE_MAC_CAP3_AMSDU_FRAG 0x20
+#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40
+#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80
+
+#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01
+#define IEEE80211_HE_MAC_CAP4_QTP 0x02
+#define IEEE80211_HE_MAC_CAP4_BQR 0x04
+#define IEEE80211_HE_MAC_CAP4_PSR_RESP 0x08
+#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10
+#define IEEE80211_HE_MAC_CAP4_OPS 0x20
+#define IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU 0x40
+/* Multi TID agg TX is split between byte #4 and #5
+ * The value is a combination of B39,B40,B41
+ */
+#define IEEE80211_HE_MAC_CAP4_MULTI_TID_AGG_TX_QOS_B39 0x80
+
+#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B40 0x01
+#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B41 0x02
+#define IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECTIVE_TRANSMISSION 0x04
+#define IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU 0x08
+#define IEEE80211_HE_MAC_CAP5_OM_CTRL_UL_MU_DATA_DIS_RX 0x10
+#define IEEE80211_HE_MAC_CAP5_HE_DYNAMIC_SM_PS 0x20
+#define IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING 0x40
+#define IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX 0x80
+
+#define IEEE80211_HE_VHT_MAX_AMPDU_FACTOR 20
+#define IEEE80211_HE_HT_MAX_AMPDU_FACTOR 16
+#define IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR 13
+
+/* 802.11ax HE PHY capabilities */
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL 0x1e
+
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe
+
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f
+#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10
+#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20
+#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40
+/* Midamble RX/TX Max NSTS is split between byte #2 and byte #3 */
+#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS 0x80
+
+#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS 0x01
+#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02
+#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04
+#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20
+
+/* Note that the meaning of UL MU below is different between an AP and a non-AP
+ * sta, where in the AP case it indicates support for Rx and in the non-AP sta
+ * case it indicates support for Tx.
+ */
+#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40
+#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80
+
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20
+#define IEEE80211_HE_PHY_CAP3_RX_PARTIAL_BW_SU_IN_20MHZ_MU 0x40
+#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80
+
+#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01
+#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02
+
+/* Minimal allowed value of Max STS under 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c
+
+/* Minimal allowed value of Max STS above 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38
+
+#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40
+#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80
+
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02
+#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB 0x04
+#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMING_PARTIAL_BW_FB 0x08
+#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40
+#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80
+
+#define IEEE80211_HE_PHY_CAP7_PSR_BASED_SR 0x01
+#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_SUPP 0x02
+#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38
+#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40
+#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80
+
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04
+#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10
+#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_TX_2X_AND_1XLTF 0x20
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242 0x00
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484 0x40
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_996 0x80
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996 0xc0
+#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_MASK 0xc0
+
+#define IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM 0x01
+#define IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK 0x02
+#define IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU 0x04
+#define IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU 0x08
+#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB 0x10
+#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB 0x20
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_0US 0x0
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_8US 0x1
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_16US 0x2
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_RESERVED 0x3
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_POS 6
+#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_MASK 0xc0
+
+#define IEEE80211_HE_PHY_CAP10_HE_MU_M1RU_MAX_LTF 0x01
+
+/* 802.11ax HE TX/RX MCS NSS Support */
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800
+
+/* TX/RX HE MCS Support field Highest MCS subfield encoding */
+enum ieee80211_he_highest_mcs_supported_subfield_enc {
+ HIGHEST_MCS_SUPPORTED_MCS7 = 0,
+ HIGHEST_MCS_SUPPORTED_MCS8,
+ HIGHEST_MCS_SUPPORTED_MCS9,
+ HIGHEST_MCS_SUPPORTED_MCS10,
+ HIGHEST_MCS_SUPPORTED_MCS11,
+};
+
+/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */
+static inline u8
+ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap)
+{
+ u8 count = 4;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 4;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
+ count += 4;
+
+ return count;
+}
+
+/* 802.11ax HE PPE Thresholds */
+#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1)
+#define IEEE80211_PPE_THRES_NSS_POS (0)
+#define IEEE80211_PPE_THRES_NSS_MASK (7)
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \
+ (BIT(5) | BIT(6))
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3)
+#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3)
+#define IEEE80211_HE_PPE_THRES_INFO_HEADER_SIZE (7)
+
+/*
+ * Calculate 802.11ax HE capabilities IE PPE field size
+ * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8*
+ */
+static inline u8
+ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u8 n;
+
+ if ((phy_cap_info[6] &
+ IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0)
+ return 0;
+
+ n = hweight8(ppe_thres_hdr &
+ IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >>
+ IEEE80211_PPE_THRES_NSS_POS));
+
+ /*
+ * Each pair is 6 bits, and we need to add the 7 "header" bits to the
+ * total size.
+ */
+ n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7;
+ n = DIV_ROUND_UP(n, 8);
+
+ return n;
+}
+
+static inline bool ieee80211_he_capa_size_ok(const u8 *data, u8 len)
+{
+ const struct ieee80211_he_cap_elem *he_cap_ie_elem = (const void *)data;
+ u8 needed = sizeof(*he_cap_ie_elem);
+
+ if (len < needed)
+ return false;
+
+ needed += ieee80211_he_mcs_nss_size(he_cap_ie_elem);
+ if (len < needed)
+ return false;
+
+ if (he_cap_ie_elem->phy_cap_info[6] &
+ IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) {
+ if (len < needed + 1)
+ return false;
+ needed += ieee80211_he_ppe_size(data[needed],
+ he_cap_ie_elem->phy_cap_info);
+ }
+
+ return len >= needed;
+}
+
+/* HE Operation defines */
+#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x00000007
+#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000008
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x00003ff0
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 4
+#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x00004000
+#define IEEE80211_HE_OPERATION_CO_HOSTED_BSS 0x00008000
+#define IEEE80211_HE_OPERATION_ER_SU_DISABLE 0x00010000
+#define IEEE80211_HE_OPERATION_6GHZ_OP_INFO 0x00020000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x3f000000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_OFFSET 24
+#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x40000000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x80000000
+
+#define IEEE80211_6GHZ_CTRL_REG_LPI_AP 0
+#define IEEE80211_6GHZ_CTRL_REG_SP_AP 1
+
+/**
+ * ieee80211_he_6ghz_oper - HE 6 GHz operation Information field
+ * @primary: primary channel
+ * @control: control flags
+ * @ccfs0: channel center frequency segment 0
+ * @ccfs1: channel center frequency segment 1
+ * @minrate: minimum rate (in 1 Mbps units)
+ */
+struct ieee80211_he_6ghz_oper {
+ u8 primary;
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH 0x3
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_20MHZ 0
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_40MHZ 1
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_80MHZ 2
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_160MHZ 3
+#define IEEE80211_HE_6GHZ_OPER_CTRL_DUP_BEACON 0x4
+#define IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO 0x38
+ u8 control;
+ u8 ccfs0;
+ u8 ccfs1;
+ u8 minrate;
+} __packed;
+
+/*
+ * In "9.4.2.161 Transmit Power Envelope element" of "IEEE Std 802.11ax-2021",
+ * it show four types in "Table 9-275a-Maximum Transmit Power Interpretation
+ * subfield encoding", and two category for each type in "Table E-12-Regulatory
+ * Info subfield encoding in the United States".
+ * So it it totally max 8 Transmit Power Envelope element.
+ */
+#define IEEE80211_TPE_MAX_IE_COUNT 8
+/*
+ * In "Table 9-277—Meaning of Maximum Transmit Power Count subfield"
+ * of "IEEE Std 802.11ax™‐2021", the max power level is 8.
+ */
+#define IEEE80211_MAX_NUM_PWR_LEVEL 8
+
+#define IEEE80211_TPE_MAX_POWER_COUNT 8
+
+/* transmit power interpretation type of transmit power envelope element */
+enum ieee80211_tx_power_intrpt_type {
+ IEEE80211_TPE_LOCAL_EIRP,
+ IEEE80211_TPE_LOCAL_EIRP_PSD,
+ IEEE80211_TPE_REG_CLIENT_EIRP,
+ IEEE80211_TPE_REG_CLIENT_EIRP_PSD,
+};
+
+/**
+ * struct ieee80211_tx_pwr_env
+ *
+ * This structure represents the "Transmit Power Envelope element"
+ */
+struct ieee80211_tx_pwr_env {
+ u8 tx_power_info;
+ s8 tx_power[IEEE80211_TPE_MAX_POWER_COUNT];
+} __packed;
+
+#define IEEE80211_TX_PWR_ENV_INFO_COUNT 0x7
+#define IEEE80211_TX_PWR_ENV_INFO_INTERPRET 0x38
+#define IEEE80211_TX_PWR_ENV_INFO_CATEGORY 0xC0
+
+/*
+ * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size
+ * @he_oper_ie: byte data of the He Operations IE, stating from the byte
+ * after the ext ID byte. It is assumed that he_oper_ie has at least
+ * sizeof(struct ieee80211_he_operation) bytes, the caller must have
+ * validated this.
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_oper_size(const u8 *he_oper_ie)
+{
+ const struct ieee80211_he_operation *he_oper = (const void *)he_oper_ie;
+ u8 oper_len = sizeof(struct ieee80211_he_operation);
+ u32 he_oper_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_oper_ie)
+ return 0;
+
+ /* Calc required length */
+ he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+ if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+ oper_len += 3;
+ if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
+ oper_len++;
+ if (he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO)
+ oper_len += sizeof(struct ieee80211_he_6ghz_oper);
+
+ /* Add the first byte (extension ID) to the total length */
+ oper_len++;
+
+ return oper_len;
+}
+
+/**
+ * ieee80211_he_6ghz_oper - obtain 6 GHz operation field
+ * @he_oper: HE operation element (must be pre-validated for size)
+ * but may be %NULL
+ *
+ * Return: a pointer to the 6 GHz operation field, or %NULL
+ */
+static inline const struct ieee80211_he_6ghz_oper *
+ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper)
+{
+ const u8 *ret = (const void *)&he_oper->optional;
+ u32 he_oper_params;
+
+ if (!he_oper)
+ return NULL;
+
+ he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+
+ if (!(he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO))
+ return NULL;
+ if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+ ret += 3;
+ if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
+ ret++;
+
+ return (const void *)ret;
+}
+
+/* HE Spatial Reuse defines */
+#define IEEE80211_HE_SPR_PSR_DISALLOWED BIT(0)
+#define IEEE80211_HE_SPR_NON_SRG_OBSS_PD_SR_DISALLOWED BIT(1)
+#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT BIT(2)
+#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT BIT(3)
+#define IEEE80211_HE_SPR_HESIGA_SR_VAL15_ALLOWED BIT(4)
+
+/*
+ * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size
+ * @he_spr_ie: byte data of the He Spatial Reuse IE, stating from the byte
+ * after the ext ID byte. It is assumed that he_spr_ie has at least
+ * sizeof(struct ieee80211_he_spr) bytes, the caller must have validated
+ * this
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_spr_size(const u8 *he_spr_ie)
+{
+ const struct ieee80211_he_spr *he_spr = (const void *)he_spr_ie;
+ u8 spr_len = sizeof(struct ieee80211_he_spr);
+ u8 he_spr_params;
+
+ /* Make sure the input is not NULL */
+ if (!he_spr_ie)
+ return 0;
+
+ /* Calc required length */
+ he_spr_params = he_spr->he_sr_control;
+ if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT)
+ spr_len++;
+ if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT)
+ spr_len += 18;
+
+ /* Add the first byte (extension ID) to the total length */
+ spr_len++;
+
+ return spr_len;
+}
+
+/* S1G Capabilities Information field */
+#define IEEE80211_S1G_CAPABILITY_LEN 15
+
+#define S1G_CAP0_S1G_LONG BIT(0)
+#define S1G_CAP0_SGI_1MHZ BIT(1)
+#define S1G_CAP0_SGI_2MHZ BIT(2)
+#define S1G_CAP0_SGI_4MHZ BIT(3)
+#define S1G_CAP0_SGI_8MHZ BIT(4)
+#define S1G_CAP0_SGI_16MHZ BIT(5)
+#define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6)
+
+#define S1G_SUPP_CH_WIDTH_2 0
+#define S1G_SUPP_CH_WIDTH_4 1
+#define S1G_SUPP_CH_WIDTH_8 2
+#define S1G_SUPP_CH_WIDTH_16 3
+#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \
+ cap[0])) << 1)
+
+#define S1G_CAP1_RX_LDPC BIT(0)
+#define S1G_CAP1_TX_STBC BIT(1)
+#define S1G_CAP1_RX_STBC BIT(2)
+#define S1G_CAP1_SU_BFER BIT(3)
+#define S1G_CAP1_SU_BFEE BIT(4)
+#define S1G_CAP1_BFEE_STS GENMASK(7, 5)
+
+#define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0)
+#define S1G_CAP2_MU_BFER BIT(3)
+#define S1G_CAP2_MU_BFEE BIT(4)
+#define S1G_CAP2_PLUS_HTC_VHT BIT(5)
+#define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6)
+
+#define S1G_CAP3_RD_RESPONDER BIT(0)
+#define S1G_CAP3_HT_DELAYED_BA BIT(1)
+#define S1G_CAP3_MAX_MPDU_LEN BIT(2)
+#define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3)
+#define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5)
+
+#define S1G_CAP4_UPLINK_SYNC BIT(0)
+#define S1G_CAP4_DYNAMIC_AID BIT(1)
+#define S1G_CAP4_BAT BIT(2)
+#define S1G_CAP4_TIME_ADE BIT(3)
+#define S1G_CAP4_NON_TIM BIT(4)
+#define S1G_CAP4_GROUP_AID BIT(5)
+#define S1G_CAP4_STA_TYPE GENMASK(7, 6)
+
+#define S1G_CAP5_CENT_AUTH_CONTROL BIT(0)
+#define S1G_CAP5_DIST_AUTH_CONTROL BIT(1)
+#define S1G_CAP5_AMSDU BIT(2)
+#define S1G_CAP5_AMPDU BIT(3)
+#define S1G_CAP5_ASYMMETRIC_BA BIT(4)
+#define S1G_CAP5_FLOW_CONTROL BIT(5)
+#define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6)
+
+#define S1G_CAP6_OBSS_MITIGATION BIT(0)
+#define S1G_CAP6_FRAGMENT_BA BIT(1)
+#define S1G_CAP6_NDP_PS_POLL BIT(2)
+#define S1G_CAP6_RAW_OPERATION BIT(3)
+#define S1G_CAP6_PAGE_SLICING BIT(4)
+#define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5)
+#define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6)
+
+#define S1G_CAP7_TACK_AS_PS_POLL BIT(0)
+#define S1G_CAP7_DUP_1MHZ BIT(1)
+#define S1G_CAP7_MCS_NEGOTIATION BIT(2)
+#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
+#define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4)
+#define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5)
+#define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6)
+#define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7)
+
+#define S1G_CAP8_TWT_GROUPING BIT(0)
+#define S1G_CAP8_BDT BIT(1)
+#define S1G_CAP8_COLOR GENMASK(4, 2)
+#define S1G_CAP8_TWT_REQUEST BIT(5)
+#define S1G_CAP8_TWT_RESPOND BIT(6)
+#define S1G_CAP8_PV1_FRAME BIT(7)
+
+#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
+#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0)
+#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1)
+
+/* EHT MAC capabilities as defined in P802.11be_D2.0 section 9.4.2.313.2 */
+#define IEEE80211_EHT_MAC_CAP0_EPCS_PRIO_ACCESS 0x01
+#define IEEE80211_EHT_MAC_CAP0_OM_CONTROL 0x02
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 0x04
+#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2 0x08
+#define IEEE80211_EHT_MAC_CAP0_RESTRICTED_TWT 0x10
+#define IEEE80211_EHT_MAC_CAP0_SCS_TRAFFIC_DESC 0x20
+#define IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_MASK 0xc0
+#define IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_3895 0
+#define IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_7991 1
+#define IEEE80211_EHT_MAC_CAP0_MAX_MPDU_LEN_11454 2
+
+#define IEEE80211_EHT_MAC_CAP1_MAX_AMPDU_LEN_MASK 0x01
+
+/* EHT PHY capabilities as defined in P802.11be_D2.0 section 9.4.2.313.3 */
+#define IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ 0x02
+#define IEEE80211_EHT_PHY_CAP0_242_TONE_RU_GT20MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI 0x08
+#define IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO 0x10
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER 0x20
+#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE 0x40
+
+/* EHT beamformee number of spatial streams <= 80MHz is split */
+#define IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK 0x80
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_80MHZ_MASK 0x03
+
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK 0x1c
+#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK 0xe0
+
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK 0x07
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK 0x38
+
+/* EHT number of sounding dimensions for 320MHz is split */
+#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP3_SOUNDING_DIM_320MHZ_MASK 0x01
+#define IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK 0x02
+#define IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK 0x04
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK 0x08
+#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK 0x10
+#define IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK 0x20
+#define IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK 0x40
+#define IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK 0x80
+
+#define IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO 0x01
+#define IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI 0x08
+#define IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK 0xf0
+
+#define IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK 0x01
+#define IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP 0x02
+#define IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP 0x04
+#define IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT 0x08
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK 0x30
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_0US 0
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_8US 1
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US 2
+#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US 3
+
+/* Maximum number of supported EHT LTF is split */
+#define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK 0xc0
+#define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK 0x07
+
+#define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK 0x78
+#define IEEE80211_EHT_PHY_CAP6_EHT_DUP_6GHZ_SUPP 0x80
+
+#define IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW 0x01
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ 0x02
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ 0x04
+#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ 0x08
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ 0x10
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ 0x20
+#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ 0x40
+#define IEEE80211_EHT_PHY_CAP7_TB_SOUNDING_FDBK_RATE_LIMIT 0x80
+
+#define IEEE80211_EHT_PHY_CAP8_RX_1024QAM_WIDER_BW_DL_OFDMA 0x01
+#define IEEE80211_EHT_PHY_CAP8_RX_4096QAM_WIDER_BW_DL_OFDMA 0x02
+
+/*
+ * EHT operation channel width as defined in P802.11be_D2.0 section 9.4.2.311
+ */
+#define IEEE80211_EHT_OPER_CHAN_WIDTH 0x7
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_20MHZ 0
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_40MHZ 1
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ 2
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_160MHZ 3
+#define IEEE80211_EHT_OPER_CHAN_WIDTH_320MHZ 4
+
+/* Calculate 802.11be EHT capabilities IE Tx/Rx EHT MCS NSS Support Field size */
+static inline u8
+ieee80211_eht_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap,
+ const struct ieee80211_eht_cap_elem_fixed *eht_cap,
+ bool from_ap)
+{
+ u8 count = 0;
+
+ /* on 2.4 GHz, if it supports 40 MHz, the result is 3 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G)
+ return 3;
+
+ /* on 2.4 GHz, these three bits are reserved, so should be 0 */
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G)
+ count += 3;
+
+ if (he_cap->phy_cap_info[0] &
+ IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+ count += 3;
+
+ if (eht_cap->phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ)
+ count += 3;
+
+ if (count)
+ return count;
+
+ return from_ap ? 3 : 4;
+}
+
+/* 802.11be EHT PPE Thresholds */
+#define IEEE80211_EHT_PPE_THRES_NSS_POS 0
+#define IEEE80211_EHT_PPE_THRES_NSS_MASK 0xf
+#define IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK 0x1f0
+#define IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE 3
+#define IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE 9
+
+/*
+ * Calculate 802.11be EHT capabilities IE EHT field size
+ */
+static inline u8
+ieee80211_eht_ppe_size(u16 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+ u32 n;
+
+ if (!(phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT))
+ return 0;
+
+ n = hweight16(ppe_thres_hdr &
+ IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK);
+ n *= 1 + (ppe_thres_hdr & IEEE80211_EHT_PPE_THRES_NSS_MASK);
+
+ /*
+ * Each pair is 6 bits, and we need to add the 9 "header" bits to the
+ * total size.
+ */
+ n = n * IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2 +
+ IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE;
+ return DIV_ROUND_UP(n, 8);
+}
+
+static inline bool
+ieee80211_eht_capa_size_ok(const u8 *he_capa, const u8 *data, u8 len,
+ bool from_ap)
+{
+ const struct ieee80211_eht_cap_elem_fixed *elem = (const void *)data;
+ u8 needed = sizeof(struct ieee80211_eht_cap_elem_fixed);
+
+ if (len < needed || !he_capa)
+ return false;
+
+ needed += ieee80211_eht_mcs_nss_size((const void *)he_capa,
+ (const void *)data,
+ from_ap);
+ if (len < needed)
+ return false;
+
+ if (elem->phy_cap_info[5] &
+ IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) {
+ u16 ppe_thres_hdr;
+
+ if (len < needed + sizeof(ppe_thres_hdr))
+ return false;
+
+ ppe_thres_hdr = (data[needed] >> 8) + data[needed + 1];
+ needed += ieee80211_eht_ppe_size(ppe_thres_hdr,
+ elem->phy_cap_info);
+ }
+
+ return len >= needed;
+}
+
+static inline bool
+ieee80211_eht_oper_size_ok(const u8 *data, u8 len)
+{
+ const struct ieee80211_eht_operation *elem = (const void *)data;
+ u8 needed = sizeof(*elem);
+
+ if (len < needed)
+ return false;
+
+ if (elem->params & IEEE80211_EHT_OPER_INFO_PRESENT) {
+ needed += 3;
+
+ if (elem->params &
+ IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT)
+ needed += 2;
+ }
+
+ return len >= needed;
+}
+
+#define LISTEN_INT_USF GENMASK(15, 14)
+#define LISTEN_INT_UI GENMASK(13, 0)
+
+#define IEEE80211_MAX_USF FIELD_MAX(LISTEN_INT_USF)
+#define IEEE80211_MAX_UI FIELD_MAX(LISTEN_INT_UI)
/* Authentication algorithms */
#define WLAN_AUTH_OPEN 0
#define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0
#define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1
#define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_LCI 8
+#define IEEE80211_SPCT_MSR_RPRT_TYPE_CIVIC 11
/* 802.11g ERP information element */
#define WLAN_ERP_NON_ERP_PRESENT (1<<0)
/* 802.11ai */
WLAN_STATUS_FILS_AUTHENTICATION_FAILURE = 108,
WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER = 109,
+ WLAN_STATUS_SAE_HASH_TO_ELEMENT = 126,
+ WLAN_STATUS_SAE_PK = 127,
};
WLAN_EID_VHT_OPERATION = 192,
WLAN_EID_EXTENDED_BSS_LOAD = 193,
WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194,
- WLAN_EID_VHT_TX_POWER_ENVELOPE = 195,
+ WLAN_EID_TX_POWER_ENVELOPE = 195,
WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196,
WLAN_EID_AID = 197,
WLAN_EID_QUIET_CHANNEL = 198,
WLAN_EID_OPMODE_NOTIF = 199,
+ WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201,
+
+ WLAN_EID_AID_REQUEST = 210,
+ WLAN_EID_AID_RESPONSE = 211,
+ WLAN_EID_S1G_BCN_COMPAT = 213,
+ WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
+ WLAN_EID_S1G_TWT = 216,
+ WLAN_EID_S1G_CAPABILITIES = 217,
WLAN_EID_VENDOR_SPECIFIC = 221,
WLAN_EID_QOS_PARAMETER = 222,
+ WLAN_EID_S1G_OPERATION = 232,
WLAN_EID_CAG_NUMBER = 237,
WLAN_EID_AP_CSN = 239,
WLAN_EID_FILS_INDICATION = 240,
WLAN_EID_DILS = 241,
WLAN_EID_FRAGMENT = 242,
+ WLAN_EID_RSNX = 244,
WLAN_EID_EXTENSION = 255
};
WLAN_EID_EXT_FILS_WRAPPED_DATA = 8,
WLAN_EID_EXT_FILS_PUBLIC_KEY = 12,
WLAN_EID_EXT_FILS_NONCE = 13,
+ WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14,
+ WLAN_EID_EXT_HE_CAPABILITY = 35,
+ WLAN_EID_EXT_HE_OPERATION = 36,
+ WLAN_EID_EXT_UORA = 37,
+ WLAN_EID_EXT_HE_MU_EDCA = 38,
+ WLAN_EID_EXT_HE_SPR = 39,
+ WLAN_EID_EXT_NDP_FEEDBACK_REPORT_PARAMSET = 41,
+ WLAN_EID_EXT_BSS_COLOR_CHG_ANN = 42,
+ WLAN_EID_EXT_QUIET_TIME_PERIOD_SETUP = 43,
+ WLAN_EID_EXT_ESS_REPORT = 45,
+ WLAN_EID_EXT_OPS = 46,
+ WLAN_EID_EXT_HE_BSS_LOAD = 47,
+ WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52,
+ WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55,
+ WLAN_EID_EXT_NON_INHERITANCE = 56,
+ WLAN_EID_EXT_KNOWN_BSSID = 57,
+ WLAN_EID_EXT_SHORT_SSID_LIST = 58,
+ WLAN_EID_EXT_HE_6GHZ_CAPA = 59,
+ WLAN_EID_EXT_UL_MU_POWER_CAPA = 60,
+ WLAN_EID_EXT_EHT_OPERATION = 106,
+ WLAN_EID_EXT_EHT_MULTI_LINK = 107,
+ WLAN_EID_EXT_EHT_CAPABILITY = 108,
};
/* Action category code */
WLAN_CATEGORY_BACK = 3,
WLAN_CATEGORY_PUBLIC = 4,
WLAN_CATEGORY_RADIO_MEASUREMENT = 5,
+ WLAN_CATEGORY_FAST_BBS_TRANSITION = 6,
WLAN_CATEGORY_HT = 7,
WLAN_CATEGORY_SA_QUERY = 8,
WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9,
WLAN_CATEGORY_FST = 18,
WLAN_CATEGORY_UNPROT_DMG = 20,
WLAN_CATEGORY_VHT = 21,
+ WLAN_CATEGORY_S1G = 22,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
};
WLAN_MESH_ACTION_TBTT_ADJUSTMENT_RESPONSE,
};
+/* Unprotected WNM action codes */
+enum ieee80211_unprotected_wnm_actioncode {
+ WLAN_UNPROTECTED_WNM_ACTION_TIM = 0,
+ WLAN_UNPROTECTED_WNM_ACTION_TIMING_MEASUREMENT_RESPONSE = 1,
+};
+
/* Security key length */
enum ieee80211_key_len {
WLAN_KEY_LEN_WEP40 = 5,
WLAN_KEY_LEN_BIP_GMAC_256 = 32,
};
+enum ieee80211_s1g_actioncode {
+ WLAN_S1G_AID_SWITCH_REQUEST,
+ WLAN_S1G_AID_SWITCH_RESPONSE,
+ WLAN_S1G_SYNC_CONTROL,
+ WLAN_S1G_STA_INFO_ANNOUNCE,
+ WLAN_S1G_EDCA_PARAM_SET,
+ WLAN_S1G_EL_OPERATION,
+ WLAN_S1G_TWT_SETUP,
+ WLAN_S1G_TWT_TEARDOWN,
+ WLAN_S1G_SECT_GROUP_ID_LIST,
+ WLAN_S1G_SECT_ID_FEEDBACK,
+ WLAN_S1G_TWT_INFORMATION = 11,
+};
+
#define IEEE80211_WEP_IV_LEN 4
#define IEEE80211_WEP_ICV_LEN 4
#define IEEE80211_CCMP_HDR_LEN 8
#define FILS_ERP_MAX_REALM_LEN 253
#define FILS_ERP_MAX_RRK_LEN 64
-#define PMK_MAX_LEN 48
+#define PMK_MAX_LEN 64
+#define SAE_PASSWORD_MAX_LEN 128
/* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */
enum ieee80211_pub_actioncode {
WLAN_PUB_ACTION_NETWORK_CHANNEL_CONTROL = 30,
WLAN_PUB_ACTION_WHITE_SPACE_MAP_ANN = 31,
WLAN_PUB_ACTION_FTM_REQUEST = 32,
- WLAN_PUB_ACTION_FTM = 33,
+ WLAN_PUB_ACTION_FTM_RESPONSE = 33,
WLAN_PUB_ACTION_FILS_DISCOVERY = 34,
};
*/
#define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2)
-/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */
+/* Multiple BSSID capability is set in the 6th bit of 3rd byte of the
+ * @WLAN_EID_EXT_CAPABILITY information element
+ */
+#define WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT BIT(6)
+
+/* Timing Measurement protocol for time sync is set in the 7th bit of 3rd byte
+ * of the @WLAN_EID_EXT_CAPABILITY information element
+ */
+#define WLAN_EXT_CAPA3_TIMING_MEASUREMENT_SUPPORT BIT(7)
+
+/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */
#define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4)
#define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5)
#define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6)
*/
#define WLAN_EXT_CAPA9_FTM_INITIATOR BIT(7)
+/* Defines support for TWT Requester and TWT Responder */
+#define WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT BIT(5)
+#define WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT BIT(6)
+
+/*
+ * When set, indicates that the AP is able to tolerate 26-tone RU UL
+ * OFDMA transmissions using HE TB PPDU from OBSS (not falsely classify the
+ * 26-tone RU UL OFDMA transmissions as radar pulses).
+ */
+#define WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT BIT(7)
+
+/* Defines support for enhanced multi-bssid advertisement*/
+#define WLAN_EXT_CAPA11_EMA_SUPPORT BIT(3)
+
/* TDLS specific payload type in the LLC/SNAP header */
#define WLAN_TDLS_SNAP_RFTYPE 0x2
WLAN_ACTION_SA_QUERY_RESPONSE = 1,
};
+/**
+ * struct ieee80211_bssid_index
+ *
+ * This structure refers to "Multiple BSSID-index element"
+ *
+ * @bssid_index: BSSID index
+ * @dtim_period: optional, overrides transmitted BSS dtim period
+ * @dtim_count: optional, overrides transmitted BSS dtim count
+ */
+struct ieee80211_bssid_index {
+ u8 bssid_index;
+ u8 dtim_period;
+ u8 dtim_count;
+};
+
+/**
+ * struct ieee80211_multiple_bssid_configuration
+ *
+ * This structure refers to "Multiple BSSID Configuration element"
+ *
+ * @bssid_count: total number of active BSSIDs in the set
+ * @profile_periodicity: the least number of beacon frames need to be received
+ * in order to discover all the nontransmitted BSSIDs in the set.
+ */
+struct ieee80211_multiple_bssid_configuration {
+ u8 bssid_count;
+ u8 profile_periodicity;
+};
+
#define SUITE(oui, id) (((oui) << 8) | (id))
/* cipher suite selectors */
#define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7)
#define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8)
#define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9)
+#define WLAN_AKM_SUITE_AP_PEER_KEY SUITE(0x000FAC, 10)
#define WLAN_AKM_SUITE_8021X_SUITE_B SUITE(0x000FAC, 11)
#define WLAN_AKM_SUITE_8021X_SUITE_B_192 SUITE(0x000FAC, 12)
+#define WLAN_AKM_SUITE_FT_8021X_SHA384 SUITE(0x000FAC, 13)
#define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14)
#define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15)
#define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16)
#define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17)
+#define WLAN_AKM_SUITE_OWE SUITE(0x000FAC, 18)
+#define WLAN_AKM_SUITE_FT_PSK_SHA384 SUITE(0x000FAC, 19)
+#define WLAN_AKM_SUITE_PSK_SHA384 SUITE(0x000FAC, 20)
+
+#define WLAN_AKM_SUITE_WFA_DPP SUITE(WLAN_OUI_WFA, 2)
#define WLAN_MAX_KEY_LEN 32
#define WLAN_OUI_WFA 0x506f9a
#define WLAN_OUI_TYPE_WFA_P2P 9
+#define WLAN_OUI_TYPE_WFA_DPP 0x1A
#define WLAN_OUI_MICROSOFT 0x0050f2
#define WLAN_OUI_TYPE_MICROSOFT_WPA 1
#define WLAN_OUI_TYPE_MICROSOFT_WMM 2
__le16 medium_time;
} __packed;
+struct ieee80211_he_6ghz_capa {
+ /* uses IEEE80211_HE_6GHZ_CAP_* below */
+ __le16 capa;
+} __packed;
+
+/* HE 6 GHz band capabilities */
+/* uses enum ieee80211_min_mpdu_spacing values */
+#define IEEE80211_HE_6GHZ_CAP_MIN_MPDU_START 0x0007
+/* uses enum ieee80211_vht_max_ampdu_length_exp values */
+#define IEEE80211_HE_6GHZ_CAP_MAX_AMPDU_LEN_EXP 0x0038
+/* uses IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_* values */
+#define IEEE80211_HE_6GHZ_CAP_MAX_MPDU_LEN 0x00c0
+/* WLAN_HT_CAP_SM_PS_* values */
+#define IEEE80211_HE_6GHZ_CAP_SM_PS 0x0600
+#define IEEE80211_HE_6GHZ_CAP_RD_RESPONDER 0x0800
+#define IEEE80211_HE_6GHZ_CAP_RX_ANTPAT_CONS 0x1000
+#define IEEE80211_HE_6GHZ_CAP_TX_ANTPAT_CONS 0x2000
+
/**
* ieee80211_get_qos_ctl - get pointer to qos control bytes
* @hdr: the frame
*
* The qos ctrl bytes come after the frame_control, duration, seq_num
- * and 3 or 4 addresses of length ETH_ALEN.
- * 3 addr: 2 + 2 + 2 + 3*6 = 24
- * 4 addr: 2 + 2 + 2 + 4*6 = 30
+ * and 3 or 4 addresses of length ETH_ALEN. Checks frame_control to choose
+ * between struct ieee80211_qos_hdr_4addr and struct ieee80211_qos_hdr.
*/
static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr)
{
- if (ieee80211_has_a4(hdr->frame_control))
- return (u8 *)hdr + 30;
+ union {
+ struct ieee80211_qos_hdr addr3;
+ struct ieee80211_qos_hdr_4addr addr4;
+ } *qos;
+
+ qos = (void *)hdr;
+ if (ieee80211_has_a4(qos->addr3.frame_control))
+ return (u8 *)&qos->addr4.qos_ctrl;
else
- return (u8 *)hdr + 24;
+ return (u8 *)&qos->addr3.qos_ctrl;
+}
+
+/**
+ * ieee80211_get_tid - get qos TID
+ * @hdr: the frame
+ */
+static inline u8 ieee80211_get_tid(struct ieee80211_hdr *hdr)
+{
+ u8 *qc = ieee80211_get_qos_ctl(hdr);
+
+ return qc[0] & IEEE80211_QOS_CTL_TID_MASK;
}
/**
return hdr->addr2;
}
+/**
+ * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU
+ * @skb: the skb to check, starting with the 802.11 header
+ */
+static inline bool ieee80211_is_bufferable_mmpdu(struct ieee80211_hdr *hdr, size_t len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)hdr;
+ __le16 fc = mgmt->frame_control;
+
+ /*
+ * IEEE 802.11 REVme D2.0 definition of bufferable MMPDU;
+ * note that this ignores the IBSS special case.
+ */
+ if (!ieee80211_is_mgmt(fc))
+ return false;
+
+ if (ieee80211_is_disassoc(fc) || ieee80211_is_deauth(fc))
+ return true;
+
+ if (!ieee80211_is_action(fc))
+ return false;
+
+ if (len < offsetofend(typeof(*mgmt), u.action.u.ftm.action_code))
+ return true;
+
+ /* action frame - additionally check for non-bufferable FTM */
+
+ if (mgmt->u.action.category != WLAN_CATEGORY_PUBLIC &&
+ mgmt->u.action.category != WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION)
+ return true;
+
+ if (mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM_REQUEST ||
+ mgmt->u.action.u.ftm.action_code == WLAN_PUB_ACTION_FTM_RESPONSE)
+ return false;
+
+ return true;
+}
+
/**
* ieee80211_get_DA - get pointer to DA
* @hdr: the frame
*category != WLAN_CATEGORY_SELF_PROTECTED &&
*category != WLAN_CATEGORY_UNPROT_DMG &&
*category != WLAN_CATEGORY_VHT &&
+ *category != WLAN_CATEGORY_S1G &&
*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
}
#define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024))
#define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x))
+static inline bool ieee80211_is_timing_measurement(struct ieee80211_hdr *hdr, size_t len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+ if (len < IEEE80211_MIN_ACTION_SIZE)
+ return false;
+
+ if (!ieee80211_is_action(hdr->frame_control))
+ return false;
+
+ if (mgmt->u.action.category == WLAN_CATEGORY_WNM_UNPROTECTED &&
+ mgmt->u.action.u.wnm_timing_msr.action_code ==
+ WLAN_UNPROTECTED_WNM_ACTION_TIMING_MEASUREMENT_RESPONSE &&
+ len >= offsetofend(typeof(*mgmt), u.action.u.wnm_timing_msr))
+ return true;
+
+ return false;
+}
+
+static inline bool ieee80211_is_ftm(struct ieee80211_hdr *hdr, size_t len)
+{
+ struct ieee80211_mgmt *mgmt = (void *)hdr;
+
+ if (!ieee80211_is_public_action((void *)mgmt, len))
+ return false;
+
+ if (mgmt->u.action.u.ftm.action_code ==
+ WLAN_PUB_ACTION_FTM_RESPONSE &&
+ len >= offsetofend(typeof(*mgmt), u.action.u.ftm))
+ return true;
+
+ return false;
+}
+
+struct element {
+ u8 id;
+ u8 datalen;
+ u8 data[];
+} __packed;
+
+/* element iteration helpers */
+#define for_each_element(_elem, _data, _datalen) \
+ for (_elem = (const struct element *)(_data); \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) && \
+ (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \
+ (int)sizeof(*_elem) + _elem->datalen; \
+ _elem = (const struct element *)(_elem->data + _elem->datalen))
+
+#define for_each_element_id(element, _id, data, datalen) \
+ for_each_element(element, data, datalen) \
+ if (element->id == (_id))
+
+#define for_each_element_extid(element, extid, _data, _datalen) \
+ for_each_element(element, _data, _datalen) \
+ if (element->id == WLAN_EID_EXTENSION && \
+ element->datalen > 0 && \
+ element->data[0] == (extid))
+
+#define for_each_subelement(sub, element) \
+ for_each_element(sub, (element)->data, (element)->datalen)
+
+#define for_each_subelement_id(sub, id, element) \
+ for_each_element_id(sub, id, (element)->data, (element)->datalen)
+
+#define for_each_subelement_extid(sub, extid, element) \
+ for_each_element_extid(sub, extid, (element)->data, (element)->datalen)
+
+/* convert frequencies */
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000
+#define KHZ_F "%d.%03d"
+
+/* convert powers */
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
+/**
+ * for_each_element_completed - determine if element parsing consumed all data
+ * @element: element pointer after for_each_element() or friends
+ * @data: same data pointer as passed to for_each_element() or friends
+ * @datalen: same data length as passed to for_each_element() or friends
+ *
+ * This function returns %true if all the data was parsed or considered
+ * while walking the elements. Only use this if your for_each_element()
+ * loop cannot be broken out of, otherwise it always returns %false.
+ *
+ * If some data was malformed, this returns %false since the last parsed
+ * element will not fill the whole remaining data.
+ */
+static inline bool for_each_element_completed(const struct element *element,
+ const void *data, size_t datalen)
+{
+ return (const u8 *)element == (const u8 *)data + datalen;
+}
+
+/**
+ * RSNX Capabilities:
+ * bits 0-3: Field length (n-1)
+ */
+#define WLAN_RSNX_CAPA_PROTECTED_TWT BIT(4)
+#define WLAN_RSNX_CAPA_SAE_H2E BIT(5)
+
+/*
+ * reduced neighbor report, based on Draft P802.11ax_D6.1,
+ * section 9.4.2.170 and accepted contributions.
+ */
+#define IEEE80211_AP_INFO_TBTT_HDR_TYPE 0x03
+#define IEEE80211_AP_INFO_TBTT_HDR_FILTERED 0x04
+#define IEEE80211_AP_INFO_TBTT_HDR_COLOC 0x08
+#define IEEE80211_AP_INFO_TBTT_HDR_COUNT 0xF0
+#define IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM 9
+#define IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM 13
+
+#define IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED 0x01
+#define IEEE80211_RNR_TBTT_PARAMS_SAME_SSID 0x02
+#define IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID 0x04
+#define IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID 0x08
+#define IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS 0x10
+#define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE 0x20
+#define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP 0x40
+
+struct ieee80211_neighbor_ap_info {
+ u8 tbtt_info_hdr;
+ u8 tbtt_info_len;
+ u8 op_class;
+ u8 channel;
+} __packed;
+
+enum ieee80211_range_params_max_total_ltf {
+ IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_4 = 0,
+ IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_8,
+ IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_16,
+ IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_UNSPECIFIED,
+};
+
+/* multi-link device */
+#define IEEE80211_MLD_MAX_NUM_LINKS 15
+
+#define IEEE80211_ML_CONTROL_TYPE 0x0007
+#define IEEE80211_ML_CONTROL_TYPE_BASIC 0
+#define IEEE80211_ML_CONTROL_TYPE_PREQ 1
+#define IEEE80211_ML_CONTROL_TYPE_RECONF 2
+#define IEEE80211_ML_CONTROL_TYPE_TDLS 3
+#define IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS 4
+#define IEEE80211_ML_CONTROL_PRESENCE_MASK 0xfff0
+
+struct ieee80211_multi_link_elem {
+ __le16 control;
+ u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_BASIC_PRES_LINK_ID 0x0010
+#define IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT 0x0020
+#define IEEE80211_MLC_BASIC_PRES_MED_SYNC_DELAY 0x0040
+#define IEEE80211_MLC_BASIC_PRES_EML_CAPA 0x0080
+#define IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP 0x0100
+#define IEEE80211_MLC_BASIC_PRES_MLD_ID 0x0200
+
+#define IEEE80211_MED_SYNC_DELAY_DURATION 0x00ff
+#define IEEE80211_MED_SYNC_DELAY_SYNC_OFDM_ED_THRESH 0x0f00
+#define IEEE80211_MED_SYNC_DELAY_SYNC_MAX_NUM_TXOPS 0xf000
+
+#define IEEE80211_EML_CAP_EMLSR_SUPP 0x0001
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY 0x000e
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_0US 0
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_32US 1
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_64US 2
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_128US 3
+#define IEEE80211_EML_CAP_EMLSR_PADDING_DELAY_256US 4
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY 0x0070
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_0US 0
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_16US 1
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_32US 2
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_64US 3
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_128US 4
+#define IEEE80211_EML_CAP_EMLSR_TRANSITION_DELAY_256US 5
+#define IEEE80211_EML_CAP_EMLMR_SUPPORT 0x0080
+#define IEEE80211_EML_CAP_EMLMR_DELAY 0x0700
+#define IEEE80211_EML_CAP_EMLMR_DELAY_0US 0
+#define IEEE80211_EML_CAP_EMLMR_DELAY_32US 1
+#define IEEE80211_EML_CAP_EMLMR_DELAY_64US 2
+#define IEEE80211_EML_CAP_EMLMR_DELAY_128US 3
+#define IEEE80211_EML_CAP_EMLMR_DELAY_256US 4
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT 0x7800
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_0 0
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_128US 1
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_256US 2
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_512US 3
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_1TU 4
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_2TU 5
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_4TU 6
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_8TU 7
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_16TU 8
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_32TU 9
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_64TU 10
+#define IEEE80211_EML_CAP_TRANSITION_TIMEOUT_128TU 11
+
+#define IEEE80211_MLD_CAP_OP_MAX_SIMUL_LINKS 0x000f
+#define IEEE80211_MLD_CAP_OP_SRS_SUPPORT 0x0010
+#define IEEE80211_MLD_CAP_OP_TID_TO_LINK_MAP_NEG_SUPP 0x0060
+#define IEEE80211_MLD_CAP_OP_FREQ_SEP_TYPE_IND 0x0f80
+#define IEEE80211_MLD_CAP_OP_AAR_SUPPORT 0x1000
+
+struct ieee80211_mle_basic_common_info {
+ u8 len;
+ u8 mld_mac_addr[6];
+ u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_PREQ_PRES_MLD_ID 0x0010
+
+struct ieee80211_mle_preq_common_info {
+ u8 len;
+ u8 variable[];
+} __packed;
+
+#define IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR 0x0010
+
+/* no fixed fields in RECONF */
+
+struct ieee80211_mle_tdls_common_info {
+ u8 len;
+ u8 ap_mld_mac_addr[6];
+} __packed;
+
+#define IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR 0x0010
+
+/* no fixed fields in PRIO_ACCESS */
+
+/**
+ * ieee80211_mle_common_size - check multi-link element common size
+ * @data: multi-link element, must already be checked for size using
+ * ieee80211_mle_size_ok()
+ */
+static inline u8 ieee80211_mle_common_size(const u8 *data)
+{
+ const struct ieee80211_multi_link_elem *mle = (const void *)data;
+ u16 control = le16_to_cpu(mle->control);
+ u8 common = 0;
+
+ switch (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE)) {
+ case IEEE80211_ML_CONTROL_TYPE_BASIC:
+ case IEEE80211_ML_CONTROL_TYPE_PREQ:
+ case IEEE80211_ML_CONTROL_TYPE_TDLS:
+ /*
+ * The length is the first octet pointed by mle->variable so no
+ * need to add anything
+ */
+ break;
+ case IEEE80211_ML_CONTROL_TYPE_RECONF:
+ if (control & IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR)
+ common += 6;
+ return common;
+ case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS:
+ if (control & IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR)
+ common += 6;
+ return common;
+ default:
+ return 0;
+ }
+
+ return sizeof(*mle) + common + mle->variable[0];
+}
+
+/**
+ * ieee80211_mle_size_ok - validate multi-link element size
+ * @data: pointer to the element data
+ * @len: length of the containing element
+ */
+static inline bool ieee80211_mle_size_ok(const u8 *data, size_t len)
+{
+ const struct ieee80211_multi_link_elem *mle = (const void *)data;
+ u8 fixed = sizeof(*mle);
+ u8 common = 0;
+ bool check_common_len = false;
+ u16 control;
+
+ if (len < fixed)
+ return false;
+
+ control = le16_to_cpu(mle->control);
+
+ switch (u16_get_bits(control, IEEE80211_ML_CONTROL_TYPE)) {
+ case IEEE80211_ML_CONTROL_TYPE_BASIC:
+ common += sizeof(struct ieee80211_mle_basic_common_info);
+ check_common_len = true;
+ if (control & IEEE80211_MLC_BASIC_PRES_LINK_ID)
+ common += 1;
+ if (control & IEEE80211_MLC_BASIC_PRES_BSS_PARAM_CH_CNT)
+ common += 1;
+ if (control & IEEE80211_MLC_BASIC_PRES_MED_SYNC_DELAY)
+ common += 2;
+ if (control & IEEE80211_MLC_BASIC_PRES_EML_CAPA)
+ common += 2;
+ if (control & IEEE80211_MLC_BASIC_PRES_MLD_CAPA_OP)
+ common += 2;
+ if (control & IEEE80211_MLC_BASIC_PRES_MLD_ID)
+ common += 1;
+ break;
+ case IEEE80211_ML_CONTROL_TYPE_PREQ:
+ common += sizeof(struct ieee80211_mle_preq_common_info);
+ if (control & IEEE80211_MLC_PREQ_PRES_MLD_ID)
+ common += 1;
+ check_common_len = true;
+ break;
+ case IEEE80211_ML_CONTROL_TYPE_RECONF:
+ if (control & IEEE80211_MLC_RECONF_PRES_MLD_MAC_ADDR)
+ common += 6;
+ break;
+ case IEEE80211_ML_CONTROL_TYPE_TDLS:
+ common += sizeof(struct ieee80211_mle_tdls_common_info);
+ check_common_len = true;
+ break;
+ case IEEE80211_ML_CONTROL_TYPE_PRIO_ACCESS:
+ if (control & IEEE80211_MLC_PRIO_ACCESS_PRES_AP_MLD_MAC_ADDR)
+ common += 6;
+ break;
+ default:
+ /* we don't know this type */
+ return true;
+ }
+
+ if (len < fixed + common)
+ return false;
+
+ if (!check_common_len)
+ return true;
+
+ /* if present, common length is the first octet there */
+ return mle->variable[0] >= common;
+}
+
+enum ieee80211_mle_subelems {
+ IEEE80211_MLE_SUBELEM_PER_STA_PROFILE = 0,
+ IEEE80211_MLE_SUBELEM_FRAGMENT = 254,
+};
+
+#define IEEE80211_MLE_STA_CONTROL_LINK_ID 0x000f
+#define IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE 0x0010
+#define IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT 0x0020
+#define IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT 0x0040
+#define IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT 0x0080
+#define IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT 0x0100
+#define IEEE80211_MLE_STA_CONTROL_NSTR_LINK_PAIR_PRESENT 0x0200
+#define IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE 0x0400
+#define IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT 0x0800
+
+struct ieee80211_mle_per_sta_profile {
+ __le16 control;
+ u8 sta_info_len;
+ u8 variable[];
+} __packed;
+
+/**
+ * ieee80211_mle_sta_prof_size_ok - validate multi-link element sta profile size
+ * @data: pointer to the sub element data
+ * @len: length of the containing sub element
+ */
+static inline bool ieee80211_mle_sta_prof_size_ok(const u8 *data, size_t len)
+{
+ const struct ieee80211_mle_per_sta_profile *prof = (const void *)data;
+ u16 control;
+ u8 fixed = sizeof(*prof);
+ u8 info_len = 1;
+
+ if (len < fixed)
+ return false;
+
+ control = le16_to_cpu(prof->control);
+
+ if (control & IEEE80211_MLE_STA_CONTROL_STA_MAC_ADDR_PRESENT)
+ info_len += 6;
+ if (control & IEEE80211_MLE_STA_CONTROL_BEACON_INT_PRESENT)
+ info_len += 2;
+ if (control & IEEE80211_MLE_STA_CONTROL_TSF_OFFS_PRESENT)
+ info_len += 8;
+ if (control & IEEE80211_MLE_STA_CONTROL_DTIM_INFO_PRESENT)
+ info_len += 2;
+ if (control & IEEE80211_MLE_STA_CONTROL_BSS_PARAM_CHANGE_CNT_PRESENT)
+ info_len += 1;
+
+ if (control & IEEE80211_MLE_STA_CONTROL_COMPLETE_PROFILE &&
+ control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE) {
+ if (control & IEEE80211_MLE_STA_CONTROL_NSTR_BITMAP_SIZE)
+ info_len += 2;
+ else
+ info_len += 1;
+ }
+
+ return prof->sta_info_len >= info_len &&
+ fixed + prof->sta_info_len <= len;
+}
+
+#define for_each_mle_subelement(_elem, _data, _len) \
+ if (ieee80211_mle_size_ok(_data, _len)) \
+ for_each_element(_elem, \
+ _data + ieee80211_mle_common_size(_data),\
+ _len - ieee80211_mle_common_size(_data))
+
#endif /* __LINUX_IEEE80211_H */
projects / carl9170fw.git / commitdiff