X-Git-Url: https://jxself.org/git/?p=carl9170fw.git;a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=17cbaf922d06500a76234b4e78988edfc19cc76f;hp=a88338ac79bfd7b7e839295fc9fc6800bc1a63ef;hb=484cb254482ee644cc2981d1e2753fca2718bcd3;hpb=6476369c2c6d4ba487408cb5daff8df0480d6b4a

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index a88338a..17cbaf9 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "rf.h"
 #include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
@@ -45,6 +46,38 @@ static void timer_init(const unsigned int timer, const unsigned int interval)
 	orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
 }
 
+void clock_set(enum cpu_clock_t clock_, bool on)
+{
+	/*
+	 * Word of Warning!
+	 * This setting does more than just mess with the CPU Clock.
+	 * So watch out, if you need _stable_ timer interrupts.
+	 */
+#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
+	if (fw.phy.frequency < 3000000)
+		set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+	else
+		set(AR9170_PWR_REG_PLL_ADDAC, 0x5143);
+#else
+	set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
+
+	fw.ticks_per_usec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV,
+		get(AR9170_PWR_REG_PLL_ADDAC));
+
+	set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | clock_));
+
+	switch (clock_) {
+	case AHB_20_22MHZ:
+		fw.ticks_per_usec >>= 1;
+	case AHB_40MHZ_OSC:
+	case AHB_40_44MHZ:
+		fw.ticks_per_usec >>= 1;
+	case AHB_80_88MHZ:
+		break;
+	}
+}
+
 static void init(void)
 {
 	led_init();
@@ -71,14 +104,9 @@ static void init(void)
 	orl(AR9170_MAC_REG_AFTER_PNP, 1);
 
 	/* Init watch dog control flag */
-#ifdef CONFIG_CARL9170FW_WATCHDOG
 	fw.watchdog_enable = 1;
 
 	set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
-#else
-	fw.watchdog_enable = 0;
-	set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-#endif /* CONFIG_CARL9170FW_WATCHDOG */
 
 #ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
 	fw.cached_gpio_state.gpio = get(AR9170_GPIO_REG_PORT_DATA) &
@@ -106,8 +134,6 @@ static void timer0_isr(void)
 	gpio_timer();
 #endif /* CONFIG_CARL9170FW_GPIO_INTERRUPT */
 
-	usb_timer();
-
 #ifdef CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT
 	set(AR9170_GPIO_REG_PORT_DATA, get(AR9170_GPIO_REG_PORT_DATA) ^ 1);
 #endif /* CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT */
@@ -138,6 +164,27 @@ static void handle_timer(void)
 #undef HANDLER
 }
 
+static void tally_update(void)
+{
+	unsigned int boff, time, delta;
+
+	time = get_clock_counter();
+	if (fw.phy.state == CARL9170_PHY_ON) {
+		delta = (time - fw.tally_clock);
+
+		fw.tally.active += delta;
+
+		boff = get(AR9170_MAC_REG_BACKOFF_STATUS);
+		if (boff & AR9170_MAC_BACKOFF_TX_PE)
+			fw.tally.tx_time += delta;
+		if (boff & AR9170_MAC_BACKOFF_CCA)
+			fw.tally.cca += delta;
+	}
+
+	fw.tally_clock = time;
+	fw.counter++;
+}
+
 static void __noreturn main_loop(void)
 {
 	/* main loop */
@@ -156,7 +203,7 @@ static void __noreturn main_loop(void)
 
 		handle_timer();
 
-		fw.counter++;
+		tally_update();
 	}
 }
 
@@ -170,7 +217,7 @@ static void __noreturn main_loop(void)
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void start(void)
+void __section(boot) start(void)
 {
 	clock_set(AHB_40MHZ_OSC, true);