carl9170 tools: fix error code propagation

eeprom_fix.c: In function ‘get_addr’:
eeprom_fix.c:44:6: warning: variable ‘err’ set but not us

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add HT extended capabilities masks

IEEE Std 802.11n, Oct. 29, 2009:
7.3.2.56.5 HT Extended Capabilities field

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.4.6

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware build: mkdir include/generated when not present

Quote from Marius L. Meyer:
I discovered what the problem was. The directory include/generated does not
exist and does not get created anywhere in the process. So when
configure/conf tries to rename .tmpconfig.h to include/generated/autoconf.h,
it fails. The problem is solved by simply creating the directory before
running autogen.sh.

Reported-by: Marius Ladegaard Meyer
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: put _start into the .boot section

Without this change, the _start entry is not placed
at the correct position and as a result the firmware
boot fails.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.6.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix gcc-4.6 compiler warnings

include/timer.h:87:20: warning: inlining failed in call to \
‘clock_set’: call is unlikely and code size would grow [-Winline]

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix uninitialized txfail variable

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add IEEE80211_COUNTRY_STRING_LEN definition

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Merge carl9170fw

Conflicts:
carlfw/Kconfig
carlfw/include/wl.h
carlfw/src/wlan.c

carl9170 firmware: simplify BACKREQ pool handling

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: more useful tx_queue hw registers names

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: optimize tx_status hot-path

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: drop failed frames faster

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: handle download queue exceptions

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add option to silence MAC RESET notifications

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update feature descriptor

 * CARL9170FW_PSM depends on RF

 * bump OTAR header revision

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: rework parts of dma_put & dma_reclaim

Not that it would fix anything.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reverse QoS queue mapping

This seems to work much better than the mapping
from Atheros original source.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.3

carl9170 firmware: remove outdated defconfig

There's no need for it anyway, the "default"
options are already specified by the Kconfig
files.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: merge CARL9170FW_PSM with the standard RF code

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: always enable HW watchdog

Ultimately, this is a mandatory feature and
must be activated.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: integrate TX_AMPDU & DELAYED_TX

This patch fixes a few outstanding issues with the
two options and integrates the features into the
default build.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Merge git./pub/scm/linux/kernel/git/chr/carl9170fw

carl9170 firmware: fix ProbeReq WOL Kconfig selection

The config option CARL9170FW_WOL_CHECK was renamed
to CARL9170FW_WOL.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Merge branch 'master' of git://git./linux/kernel/git/chr/carl9170fw

carl9170 firmware: integrate TX_AMPDU & DELAYED_TX

This patch fixes a few outstanding issues with the
two options and integrates the features into the
default build.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Merge branch 'master' of git://git./linux/kernel/git/chr/carl9170fw

carlu: fix error code propagation

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update copyright boilerplate

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: various small updates

 * remove outdated Kconfig option

 * fix carlu firmware location

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware build: simplify build process

Several users tried to use the generated carl9170.fw
without applying the firmware descriptor first. This
will obviously not work... Now cmake takes care of
this step as well and I have to say that it now looks
less confusing than before ;).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: fix hexdump formatting

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: correct IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK macro

It is defined in include/linux/ieee80211.h. As per IEEE spec.
bit6 to bit15 in block ack parameter represents buffer size.
So the bitmask should be 0xFFC0.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Cc: stable@kernel.org
Reviewed-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: Wake-up on rx'ed Probe Request

This option allows the firmware to wakeup the host,
when it receives a probe request for a given SSID.

The advantage of this solution is that it works with
almost all client devices and various operating
systems. No special injection or [unencrypted] network
setup is required, just "active scan".

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: optimize carl9170_tx_superframe access

Setting __aligned allows gcc to produce more compact
binaries.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix gcc alignment warnings

warning: cast increases required alignment of target type.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: show number of generated frames

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: per-vif tx sequence counter

mac80211 will properly assign sequence numbers to QoS-data frames
but cannot do so correctly for non-QoS-data and management frames
because beacons need them from that counter as well and mac80211
cannot guarantee proper sequencing.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reorder SUSPEND/RESUME/WOL paths

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: wol stop after inject error

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: sample WOL packet generator

Generates a MAGIC WOL packet.

- Note -

Monitor interfaces [with injection] can be easily created by "iw".
<http://wireless.kernel.org/en/users/Documentation/iw#Adding_interfaces_with_iw>

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: Wake-on-LAN support

With this feature enabled, the device will stay
active while the host goes into System Standby
[Suspend to RAM!].

Furthermore, it scans all incoming 802.11 data frames
for a MAGIC WOL pattern and - when found - propagates
the wake-up call to the USB Host.

Notes/Limitations:
* Your host has to support USB remote wake-up.
  [In some cases, /proc/acpi/wakeup has to be
   configured as well - see Google for more
   details]

* The MAC address is taken from the device EEPROM.
  [so, ifconfig dev hw ether overrides don't
   work (yet)]

* The magic pattern has to be within the first
  320 bytes of the data frame.

* The magic frames has to be send unencrypted.
  Therefore the WOL initiator has to support
  frame injection [not a problem for most
  mac80211-based drivers].

* The initatior need to be in range and on the
  same channel as well.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update headers for WOL

This patch adds a few definitions for wake up on LAN.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add ieee80211_hdrlen helper from cfg80211.h

ieee80211_hdrlen is a non-standard extenstion,
therefore it has to go into a separate commit.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: random number generator test

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: fix libcarlfw on 64bit cpus

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: fix compiler warnings

fwinfo.c:258: warning: format ‘%u’ expects type ‘unsigned int’, but argument 3 has type ‘size_t’
eeprom_fix.c:235: warning: overflow in implicit constant conversion

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware toolchain: newlib 1.19.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: fix conflicting function declaration types

rx.c:52: error: conflicting types for ‘carlu_handle_command’
carlu.h:143: note: previous declaration of ‘carlu_handle_command’ was here

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Remove unused third address from mesh address extension header.

The Mesh Control header only includes 0, 1 or 2 addresses. If there is
one address, it should be interpreted as Address 4.  If there are 2,
they are interpreted as Addresses 5 and 6 (Address 4 being the 4th
address in the 802.11 header).

The address extension used to hold up to 3 addresses instead of the current 2.
I'm not sure which draft version changed this, but it is very unlikely that it
will change again given the state of the approval process of this draft.  See
section 7.1.3.6.3 in current draft (8.0).

Also, note that the extra address that I'm removing was not being used, so this
change has no effect on over-the-air frame formats.  But I thought I better
remove it before someone does start using it.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Let userspace enable and configure vendor specific path selection.

Userspace will now be allowed to toggle between the default path
selection algorithm (HWMP, implemented in the kernel), and a vendor
specific alternative.  Also in the same patch, allow userspace to add
information elements to mesh beacons.  This is accordance with the
Extensible Path Selection Framework specified in version 7.0 of the
802.11s draft.

Signed-off-by: Javier Cardona <javier@cozybit.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix CAB MAC RESET regression

commit "carl9170 firmware: improve tx ampdu ba_end handling"
introduced a serious regression.

Since the wlan_trigger was missing, the flushed CAB frames
were stuck in tx queue. This of course lead to countless
warnings from the tx watchdog as it reseted the MAC
processor over and over again.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix inaccurate delay calculation

The internal refclock is set by the driver to either:
44MHz - when the device operates on a 2.4 GHz channel
40MHz - 5GHz Band

This patch removes the previously used "80MHz" constant
(that's wrong anyway since this is the HT40 AHB/CPU clock)
and enhance the code so it can deal with the slight clock
speed variations.

Reported-by: Ignacy Gawedzki <i@lri.fr>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: improve tx ampdu ba_end handling

According to the documentation, the hardwire MAC helps
forming an aggregated frame.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix CAB queue delivery

This patch fixes a problem were frames - destined for
after-DTIM delivery - would just skip the waiting stage.

However, DELAYED_TX is not enabled by default. So, only
the few people who use a custom, non-standard firmware
will be affected.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reorganize wlan context members

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: return to the default clock rate before rebooting

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.2

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: replace a few FUSB200 magics

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: refactor suspend/resume callbacks

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add some more Faraday's FUSB200 defs

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove static rx chainmask register update

The driver takes care of both chainmasks values.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: clarify aggregation vs. qos situation

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

ieee80211: add Parameter Set Count bitmask

WMM IE QoS Info field lower 4 bits: Parameter Set Count

Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: toolchain binutils 2.21

Finally, it's out.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

cfg80211: add some element IDs in enum ieee80211_eid

1)WLAN_EID_BSS_COEX_2040
2)WLAN_EID_OVERLAP_BSS_SCAN_PARAM
3)WLAN_EID_EXT_CAPABILITY

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reset PTA-DMA registers before reboot

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: add defs of the default interrupt table

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reinit stack pointer before jumping to bootcode

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: cleanup dma memory before reset

While the documentation does not mention anything
in this regard. There's clearly some bootloader
action in the DMA memory region.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update version to 1.9.1

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix random reboot failures

This patch improves the reliability of various
reboot paths.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware build: automatically apply miniboot.fw

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: minor shared header clean up

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix ar9170_stream struct

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: move from private carl9170_tx_status to public _carl9170_tx_status

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: privatize firmware structs

This patch removes all public bit-packed structs
from the public view by making them private with
ifdef __CARL9170FW__.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

Revert "carl9170 firmware: toolchain binutils 2.20.51"

This reverts commit 1999e162e83656d48ede992f37923c6efa85b123.

Oops, 2.20.51 is not an official release.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: fix build error

carlfw/usb/usb.c: In function 'usb_ep0setup':
carlfw/usb/usb.c:701: error: will never be executed

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

mac80211: Update mesh constants to approved IEEE ANA values

This patch updates IEEE802.11 mesh constants to be consistent with newly
approved values. It modifies some values, as well as adds many new constants
in preparation for updating mesh code to the current 802.11s drafts. ANA
numbers were taken from:
https://mentor.ieee.org/802.11/dcn/09/11-09-0031-12-0000-ana-database-assigned-number-authority.xls

A few notes are in order:
1. This will break backwards compatibility with existing Linux kernels as
over-the-air constants have changed.
2. Some old and obsolete constants have been retained for now as the mesh code
itself hasn't been updated yet to the new 802.11s draft. This was desired to
keep the existing mesh scheme working until it can be updated. Adding the
approved values is the first step in updating the mesh code.
3. Obsolete constants have been clearly marked.
4. All ANA approved 802.11s constants have been added.

Signed-off-by: Steve deRosier <steve@cozybit.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: introduce __aligned compiler attribute v2

This patch reduces the firmware image size considerably.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: carlu_regwrite wrappers

The wrappers will come in handy, once we
need to import code from the kernel driver.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: merge usb-frontend context carlusb into generic carlu struct

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: add missing endian conversion

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: add GPIO test

This new test allows flashes the LEDs and allows
the user to check if the WPS button works.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: put command definitions into separate header

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: support testing async commands

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carlu: fix copy+paste error

Don't download and check the firmware image twice.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update pram size comment

Only 16 kbytes are reserved for the program ram (+ stack), or
at least visible for my customer device.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: update API to 1.9.0

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: reintegrate timer/clock routines

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170: fix total error filter bit handling

The total error (aka fatal error) bit was erroneously
prefixed as AR9170_RX_ERROR instead of AR9170_RX_STATUS.

(+ minor styling tweaks)

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firwmare: toolchain gcc 4.4.5

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware tools: don't show null entries

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: remove bogoclock

There's no need to measure the cpu clock. The internal clock
source is (always) set to 80Mhz and only timer 0 to 3 are
affected by under-/overclocking.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: purge undefined function declarations

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: introduce __noreturn attribute

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

carl9170 firmware: upgrade API struct layout checks

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>