From: Jason Self Date: Sun, 5 Jun 2022 00:36:00 +0000 (-0700) Subject: carl9170: Update to latest upstream X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=refs%2Fheads%2Fmaster;p=linux-libre-firmware.git carl9170: Update to latest upstream --- diff --git a/WHENCE b/WHENCE index 133dd62..26aeaeb 100644 --- a/WHENCE +++ b/WHENCE @@ -154,8 +154,8 @@ From https://git.kernel.org/pub/scm/utils/cis-tools/cis-tools.git Driver: carl9170 -- Atheros AR9170 802.11 draft-n USB driver -Version: Based on commit bdb09091452a302db607b14c9025a91d9c09405a -dated July 25 2020. +Version: Based on commit 2f3ccb41237fba9e8dd7543d3b11c0746a5d8313 +dated February 5 2022. Licence: GPLv2 or later. diff --git a/carl9170fw/autogen.sh b/carl9170fw/autogen.sh index 83a6f0b..42cbe06 100755 --- a/carl9170fw/autogen.sh +++ b/carl9170fw/autogen.sh @@ -16,7 +16,6 @@ case "$1" in compile) echo "Compile time..." - make carl9170.elf make ;; diff --git a/carl9170fw/carlfw/CMakeLists.txt b/carl9170fw/carlfw/CMakeLists.txt index 8647a75..1f04afa 100644 --- a/carl9170fw/carlfw/CMakeLists.txt +++ b/carl9170fw/carlfw/CMakeLists.txt @@ -39,13 +39,14 @@ set_target_properties(carl9170.elf PROPERTIES LINKER_LANGUAGE C) set_target_properties(carl9170.elf PROPERTIES COMPILE_FLAGS "${CARLFW_CFLAGS}") set_target_properties(carl9170.elf PROPERTIES LINK_FLAGS "${CARLFW_CFLAGS} -Wl,-Tcarl9170.lds") -add_custom_target(firmware ALL) +add_custom_target(firmware ALL DEPENDS carl9170.elf) add_custom_command( DEPENDS carl9170.elf COMMAND ${OBJCOPY} ARGS --strip-unneeded -O binary -R .sram -R .eeprom -R .fwdsc carl9170.elf carl9170.bin TARGET firmware + BYPRODUCTS carl9170.bin OUTPUTS carl9170.bin) add_custom_command( @@ -53,6 +54,7 @@ add_custom_command( COMMAND ${OBJCOPY} ARGS --strip-unneeded -O binary -j .fwdsc carl9170.elf carl9170.dsc TARGET firmware + BYPRODUCTS carl9170.dsc OUTPUTS carl9170.dsc) add_custom_command( diff --git a/carl9170fw/carlfw/Kconfig b/carl9170fw/carlfw/Kconfig index 46eb1bb..455c793 100644 --- a/carl9170fw/carlfw/Kconfig +++ b/carl9170fw/carlfw/Kconfig @@ -34,7 +34,7 @@ config CARL9170FW_RX_FRAME_LEN config CARL9170FW_GPIO_INTERRUPT def_bool y prompt "GPIO Software Interrupt" - ---help--- + help When this option is enabled, the firmware will poll the GPIO registers and reports to the driver whenever the GPIO state has changed from a previous state. @@ -45,7 +45,7 @@ config CARL9170FW_GPIO_INTERRUPT config CARL9170FW_SECURITY_ENGINE def_bool y prompt "Support Hardware Crypto Engine" - ---help--- + help This options controls if the firmware will allow the driver to program the security engine / CAM through a firmware interface. @@ -56,7 +56,7 @@ config CARL9170FW_SECURITY_ENGINE config CARL9170FW_RADIO_FUNCTIONS def_bool y prompt "Enable Firmware-supported Radio/RF functions" - ---help--- + help Some PHY/RF functions (e.g.: AGC and Noise calibration) need to be done in the firmware. @@ -73,7 +73,7 @@ config CARL9170FW_PRINTF def_bool y prompt "Advanced printf" depends on CARL9170FW_DEBUG_UART || CARL9170FW_DEBUG_USB - ---help--- + help Advanced printf (very useful for debugging purposes) The formats supported by this implementation are: 'd' 'u' 'c' 's' 'x' 'X' 'p'. @@ -89,7 +89,7 @@ config CARL9170FW_WOL_OPTION def_bool n prompt "Wakeup on WLAN" depends on CARL9170FW_EXPERIMENTAL - ---help--- + help With this option enabled, the firmware can wake-up suspended hosts... As long as they fully support USB remote wakeup. @@ -103,7 +103,7 @@ config CARL9170FW_WOL_NL80211_TRIGGERS prompt "Standard NL80211 wakeup triggers" depends on CARL9170FW_WOL_OPTION select CARL9170FW_WOL - ---help--- + help Available triggers: * Magic Packet(tm) pattern * disconnect event @@ -113,7 +113,7 @@ config CARL9170FW_WOL_PROBE_REQUEST prompt "Probe Request" depends on CARL9170FW_WOL_OPTION select CARL9170FW_WOL - ---help--- + help Scan probe requests for a given SSID. config CARL9170FW_WOL_PROBE_REQUEST_SSID @@ -142,7 +142,7 @@ config CARL9170FW_80MHZ_CLOCK def_bool n prompt "Allow 80/88MHz clock for HT40" depends on CARL9170FW_EXPERIMENTAL - ---help--- + help The SoC can run up to 80/88MHz in HT40 mode. This improves throughput and timing accuracy over the 40/44MHz clock. However some devices don't have heat shields and they with @@ -161,7 +161,7 @@ config CARL9170FW_DEBUG_LED_HEARTBEAT def_bool n prompt "LED Heartbeat" depends on CARL9170FW_BROKEN_FEATURES - ---help--- + help This option conflicts with the application's LED code. Also, it assumes that you have two LEDs, which is not necessarily true. @@ -170,7 +170,7 @@ config CARL9170FW_DEBUG_UART def_bool n prompt "Pass debug messages through Highspeed UART" depends on CARL9170FW_BROKEN_FEATURES - ---help--- + help This option allows the firmware to send BUG/ERR/INFO/DBG and hexdumps through the UART _as well_. However, first: you must connect a working logger. @@ -201,7 +201,7 @@ config CARL9170FW_USB_MODESWITCH def_bool n prompt "USB 1.1 / 2.0 switching support" depends on CARL9170FW_BROKEN_FEATURES && CARL9170FW_USB_STANDARD_CMDS - ---help--- + help Mostly implemented, but untested and some serious doubts remain. @@ -214,7 +214,7 @@ menu "Build Options" config CARL9170FW_AGGRESSIVE_CFLAGS def_bool y prompt "Enable aggressive size optimization" - ---help--- + help This option adds several more optimization compiler flags, which can greatly reduce the firmware size... at the expense of machine-code readability. diff --git a/carl9170fw/carlfw/usb/Kconfig b/carl9170fw/carlfw/usb/Kconfig index dc70776..0cea6c2 100644 --- a/carl9170fw/carlfw/usb/Kconfig +++ b/carl9170fw/carlfw/usb/Kconfig @@ -3,7 +3,7 @@ menu "USB Firmware Configuration Settings" config CARL9170FW_USB_STANDARD_CMDS def_bool y prompt "Basic USB Interface" - ---help--- + help Allows the device to be queried about Standard USB 2.0 Device Description Descriptors. @@ -12,7 +12,7 @@ config CARL9170FW_USB_STANDARD_CMDS config CARL9170FW_USB_UP_STREAM def_bool y prompt "USB Upload Stream" - ---help--- + help This features allows the USB silicon to combine small, single frames into bigger transfers. This can help to reduce some per-transfer overhead in the application. @@ -26,7 +26,7 @@ config CARL9170FW_USB_DN_STREAM config CARL9170FW_DEBUG_USB def_bool y prompt "Pass debug messages through USB transport" - ---help--- + help Report all firmware messages through the USB transport. But there is a catch: In case of a BUG, the USB transport needs to be functional, otherwise the application won't diff --git a/carl9170fw/config/.gitignore b/carl9170fw/config/.gitignore index c68f45b..68bc621 100644 --- a/carl9170fw/config/.gitignore +++ b/carl9170fw/config/.gitignore @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only conf parser.tab.c parser.tab.h diff --git a/carl9170fw/config/conf.c b/carl9170fw/config/conf.c index 5f1758c..1f9dbc0 100644 --- a/carl9170fw/config/conf.c +++ b/carl9170fw/config/conf.c @@ -11,7 +11,6 @@ #include #include #include -#include #include #include @@ -34,6 +33,8 @@ enum input_mode { listnewconfig, helpnewconfig, olddefconfig, + yes2modconfig, + mod2yesconfig, }; static enum input_mode input_mode = oldaskconfig; @@ -467,6 +468,8 @@ static struct option long_opts[] = { {"listnewconfig", no_argument, NULL, listnewconfig}, {"helpnewconfig", no_argument, NULL, helpnewconfig}, {"olddefconfig", no_argument, NULL, olddefconfig}, + {"yes2modconfig", no_argument, NULL, yes2modconfig}, + {"mod2yesconfig", no_argument, NULL, mod2yesconfig}, {NULL, 0, NULL, 0} }; @@ -489,6 +492,8 @@ static void conf_usage(const char *progname) printf(" --allmodconfig New config where all options are answered with mod\n"); printf(" --alldefconfig New config with all symbols set to default\n"); printf(" --randconfig New config with random answer to all options\n"); + printf(" --yes2modconfig Change answers from yes to mod if possible\n"); + printf(" --mod2yesconfig Change answers from mod to yes if possible\n"); } int main(int ac, char **av) @@ -553,6 +558,8 @@ int main(int ac, char **av) case listnewconfig: case helpnewconfig: case olddefconfig: + case yes2modconfig: + case mod2yesconfig: break; case '?': conf_usage(progname); @@ -587,6 +594,8 @@ int main(int ac, char **av) case listnewconfig: case helpnewconfig: case olddefconfig: + case yes2modconfig: + case mod2yesconfig: conf_read(NULL); break; case allnoconfig: @@ -660,6 +669,12 @@ int main(int ac, char **av) break; case savedefconfig: break; + case yes2modconfig: + conf_rewrite_mod_or_yes(def_y2m); + break; + case mod2yesconfig: + conf_rewrite_mod_or_yes(def_m2y); + break; case oldaskconfig: rootEntry = &rootmenu; conf(&rootmenu); diff --git a/carl9170fw/config/confdata.c b/carl9170fw/config/confdata.c index a124a25..99664fd 100644 --- a/carl9170fw/config/confdata.c +++ b/carl9170fw/config/confdata.c @@ -5,6 +5,7 @@ #include #include +#include #include #include #include @@ -756,25 +757,6 @@ static struct conf_printer header_printer_cb = .print_comment = header_print_comment, }; -/* - * Tristate printer - * - * This printer is used when generating the `include/generated/tristate.conf' file. - */ -static void -tristate_print_symbol(FILE *fp, struct symbol *sym, const char *value, void *arg) -{ - - if (sym->type == S_TRISTATE && *value != 'n') - fprintf(fp, "%s%s=%c\n", CONFIG_, sym->name, (char)toupper(*value)); -} - -static struct conf_printer tristate_printer_cb = -{ - .print_symbol = tristate_print_symbol, - .print_comment = kconfig_print_comment, -}; - static void conf_write_symbol(FILE *fp, struct symbol *sym, struct conf_printer *printer, void *printer_arg) { @@ -1108,7 +1090,7 @@ int conf_write_autoconf(int overwrite) struct symbol *sym; const char *name; const char *autoconf_name = conf_get_autoconfig_name(); - FILE *out, *tristate, *out_h, *out_c; + FILE *out, *out_h, *out_c; int i; if (!overwrite && is_present(autoconf_name)) @@ -1123,30 +1105,20 @@ int conf_write_autoconf(int overwrite) if (!out) return 1; - tristate = fopen(".tmpconfig_tristate", "w"); - if (!tristate) { - fclose(out); - return 1; - } - out_h = fopen(".tmpconfig.h", "w"); if (!out_h) { fclose(out); - fclose(tristate); return 1; } out_c = fopen(".tmpconfig.cmake", "w"); if (!out_c) { fclose(out); - fclose(tristate); fclose(out_h); } conf_write_heading(out, &kconfig_printer_cb, NULL); - conf_write_heading(tristate, &tristate_printer_cb, NULL); - conf_write_heading(out_h, &header_printer_cb, NULL); conf_write_heading(out_c, &kconfig_printer_cmake_cb, NULL); @@ -1156,17 +1128,14 @@ int conf_write_autoconf(int overwrite) if (!(sym->flags & SYMBOL_WRITE) || !sym->name) continue; - /* write symbol to auto.conf, tristate and header files */ + /* write symbol to auto.conf and header files */ conf_write_symbol(out, sym, &kconfig_printer_cb, (void *)1); - conf_write_symbol(tristate, sym, &tristate_printer_cb, (void *)1); - conf_write_symbol(out_h, sym, &header_printer_cb, NULL); conf_write_symbol(out_c, sym, &kconfig_printer_cmake_cb, NULL); } fclose(out); - fclose(tristate); fclose(out_h); fclose(out_c); @@ -1178,14 +1147,6 @@ int conf_write_autoconf(int overwrite) if (rename(".tmpconfig.h", name)) return 1; - name = getenv("KCONFIG_TRISTATE"); - if (!name) - name = "include/generated/tristate.conf"; - if (make_parent_dir(name)) - return 1; - if (rename(".tmpconfig_tristate", name)) - return 1; - if (make_parent_dir(autoconf_name)) return 1; @@ -1420,7 +1381,7 @@ bool conf_set_all_new_symbols(enum conf_def_mode mode) sym_calc_value(csym); if (mode == def_random) - has_changed = randomize_choice_values(csym); + has_changed |= randomize_choice_values(csym); else { set_all_choice_values(csym); has_changed = true; @@ -1429,3 +1390,18 @@ bool conf_set_all_new_symbols(enum conf_def_mode mode) return has_changed; } + +void conf_rewrite_mod_or_yes(enum conf_def_mode mode) +{ + struct symbol *sym; + int i; + tristate old_val = (mode == def_y2m) ? yes : mod; + tristate new_val = (mode == def_y2m) ? mod : yes; + + for_all_symbols(i, sym) { + if (sym_get_type(sym) == S_TRISTATE && + sym->def[S_DEF_USER].tri == old_val) + sym->def[S_DEF_USER].tri = new_val; + } + sym_clear_all_valid(); +} diff --git a/carl9170fw/config/expr.c b/carl9170fw/config/expr.c index 9f1de58..81ebf81 100644 --- a/carl9170fw/config/expr.c +++ b/carl9170fw/config/expr.c @@ -13,7 +13,6 @@ #define DEBUG_EXPR 0 -static int expr_eq(struct expr *e1, struct expr *e2); static struct expr *expr_eliminate_yn(struct expr *e); struct expr *expr_alloc_symbol(struct symbol *sym) @@ -250,7 +249,7 @@ void expr_eliminate_eq(struct expr **ep1, struct expr **ep2) * equals some operand in the other (operands do not need to appear in the same * order), recursively. */ -static int expr_eq(struct expr *e1, struct expr *e2) +int expr_eq(struct expr *e1, struct expr *e2) { int res, old_count; diff --git a/carl9170fw/config/expr.h b/carl9170fw/config/expr.h index 017843c..5c34436 100644 --- a/carl9170fw/config/expr.h +++ b/carl9170fw/config/expr.h @@ -191,7 +191,6 @@ enum prop_type { struct property { struct property *next; /* next property - null if last */ - struct symbol *sym; /* the symbol for which the property is associated */ enum prop_type type; /* type of property */ const char *text; /* the prompt value - P_PROMPT, P_MENU, P_COMMENT */ struct expr_value visible; @@ -301,6 +300,7 @@ struct expr *expr_alloc_or(struct expr *e1, struct expr *e2); struct expr *expr_copy(const struct expr *org); void expr_free(struct expr *e); void expr_eliminate_eq(struct expr **ep1, struct expr **ep2); +int expr_eq(struct expr *e1, struct expr *e2); tristate expr_calc_value(struct expr *e); struct expr *expr_trans_bool(struct expr *e); struct expr *expr_eliminate_dups(struct expr *e); diff --git a/carl9170fw/config/lexer.l b/carl9170fw/config/lexer.l index 8aa0197..2ee9f31 100644 --- a/carl9170fw/config/lexer.l +++ b/carl9170fw/config/lexer.l @@ -12,7 +12,6 @@ #include #include #include -#include #include "lkc.h" #include "parser.tab.h" @@ -36,7 +35,7 @@ struct buffer { YY_BUFFER_STATE state; }; -struct buffer *current_buf; +static struct buffer *current_buf; static int last_ts, first_ts; @@ -105,7 +104,7 @@ n [A-Za-z0-9_-] "endchoice" return T_ENDCHOICE; "endif" return T_ENDIF; "endmenu" return T_ENDMENU; -"help"|"---help---" return T_HELP; +"help" return T_HELP; "hex" return T_HEX; "if" return T_IF; "imply" return T_IMPLY; diff --git a/carl9170fw/config/lkc.h b/carl9170fw/config/lkc.h index 4fb16f3..bee2413 100644 --- a/carl9170fw/config/lkc.h +++ b/carl9170fw/config/lkc.h @@ -6,6 +6,10 @@ #ifndef LKC_H #define LKC_H +#include +#include +#include + #include "expr.h" #ifdef __cplusplus @@ -34,6 +38,8 @@ enum conf_def_mode { def_default, def_yes, def_mod, + def_y2m, + def_m2y, def_no, def_random }; @@ -52,6 +58,7 @@ const char *conf_get_configname(void); void sym_set_change_count(int count); void sym_add_change_count(int count); bool conf_set_all_new_symbols(enum conf_def_mode mode); +void conf_rewrite_mod_or_yes(enum conf_def_mode mode); void set_all_choice_values(struct symbol *csym); /* confdata.c and expr.c */ @@ -63,23 +70,6 @@ static inline void xfwrite(const void *str, size_t len, size_t count, FILE *out) fprintf(stderr, "Error in writing or end of file.\n"); } -/* menu.c */ -void _menu_init(void); -void menu_warn(struct menu *menu, const char *fmt, ...); -struct menu *menu_add_menu(void); -void menu_end_menu(void); -void menu_add_entry(struct symbol *sym); -void menu_add_dep(struct expr *dep); -void menu_add_visibility(struct expr *dep); -struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); -void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); -void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep); -void menu_add_option_modules(void); -void menu_add_option_defconfig_list(void); -void menu_add_option_allnoconfig_y(void); -void menu_finalize(struct menu *parent); -void menu_set_type(int type); - /* util.c */ struct file *file_lookup(const char *name); void *xmalloc(size_t size); @@ -106,13 +96,42 @@ void str_append(struct gstr *gs, const char *s); void str_printf(struct gstr *gs, const char *fmt, ...); const char *str_get(struct gstr *gs); +/* menu.c */ +void _menu_init(void); +void menu_warn(struct menu *menu, const char *fmt, ...); +struct menu *menu_add_menu(void); +void menu_end_menu(void); +void menu_add_entry(struct symbol *sym); +void menu_add_dep(struct expr *dep); +void menu_add_visibility(struct expr *dep); +struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep); +void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep); +void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep); +void menu_add_option_modules(void); +void menu_add_option_defconfig_list(void); +void menu_add_option_allnoconfig_y(void); +void menu_finalize(struct menu *parent); +void menu_set_type(int type); + +extern struct menu rootmenu; + +bool menu_is_empty(struct menu *menu); +bool menu_is_visible(struct menu *menu); +bool menu_has_prompt(struct menu *menu); +const char *menu_get_prompt(struct menu *menu); +struct menu *menu_get_root_menu(struct menu *menu); +struct menu *menu_get_parent_menu(struct menu *menu); +bool menu_has_help(struct menu *menu); +const char *menu_get_help(struct menu *menu); +struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); +void menu_get_ext_help(struct menu *menu, struct gstr *help); + /* symbol.c */ void sym_clear_all_valid(void); struct symbol *sym_choice_default(struct symbol *sym); struct property *sym_get_range_prop(struct symbol *sym); const char *sym_get_string_default(struct symbol *sym); struct symbol *sym_check_deps(struct symbol *sym); -struct property *prop_alloc(enum prop_type type, struct symbol *sym); struct symbol *prop_get_symbol(struct property *prop); static inline tristate sym_get_tristate_value(struct symbol *sym) diff --git a/carl9170fw/config/lkc_proto.h b/carl9170fw/config/lkc_proto.h index f9ab982..9e81be3 100644 --- a/carl9170fw/config/lkc_proto.h +++ b/carl9170fw/config/lkc_proto.h @@ -12,20 +12,6 @@ bool conf_get_changed(void); void conf_set_changed_callback(void (*fn)(void)); void conf_set_message_callback(void (*fn)(const char *s)); -/* menu.c */ -extern struct menu rootmenu; - -bool menu_is_empty(struct menu *menu); -bool menu_is_visible(struct menu *menu); -bool menu_has_prompt(struct menu *menu); -const char * menu_get_prompt(struct menu *menu); -struct menu * menu_get_root_menu(struct menu *menu); -struct menu * menu_get_parent_menu(struct menu *menu); -bool menu_has_help(struct menu *menu); -const char * menu_get_help(struct menu *menu); -struct gstr get_relations_str(struct symbol **sym_arr, struct list_head *head); -void menu_get_ext_help(struct menu *menu, struct gstr *help); - /* symbol.c */ extern struct symbol * symbol_hash[SYMBOL_HASHSIZE]; diff --git a/carl9170fw/config/menu.c b/carl9170fw/config/menu.c index d9d1646..a5fbd6c 100644 --- a/carl9170fw/config/menu.c +++ b/carl9170fw/config/menu.c @@ -65,7 +65,8 @@ void menu_add_entry(struct symbol *sym) struct menu *menu_add_menu(void) { last_entry_ptr = ¤t_entry->list; - return current_menu = current_entry; + current_menu = current_entry; + return current_menu; } void menu_end_menu(void) @@ -124,61 +125,76 @@ void menu_set_type(int type) sym_type_name(sym->type), sym_type_name(type)); } -static struct property *menu_add_prop(enum prop_type type, char *prompt, struct expr *expr, struct expr *dep) +static struct property *menu_add_prop(enum prop_type type, struct expr *expr, + struct expr *dep) { - struct property *prop = prop_alloc(type, current_entry->sym); + struct property *prop; + prop = xmalloc(sizeof(*prop)); + memset(prop, 0, sizeof(*prop)); + prop->type = type; + prop->file = current_file; + prop->lineno = zconf_lineno(); prop->menu = current_entry; prop->expr = expr; prop->visible.expr = dep; - if (prompt) { - if (isspace(*prompt)) { - prop_warn(prop, "leading whitespace ignored"); - while (isspace(*prompt)) - prompt++; - } - if (current_entry->prompt && current_entry != &rootmenu) - prop_warn(prop, "prompt redefined"); + /* append property to the prop list of symbol */ + if (current_entry->sym) { + struct property **propp; - /* Apply all upper menus' visibilities to actual prompts. */ - if(type == P_PROMPT) { - struct menu *menu = current_entry; + for (propp = ¤t_entry->sym->prop; + *propp; + propp = &(*propp)->next) + ; + *propp = prop; + } - while ((menu = menu->parent) != NULL) { - struct expr *dup_expr; + return prop; +} - if (!menu->visibility) - continue; - /* - * Do not add a reference to the - * menu's visibility expression but - * use a copy of it. Otherwise the - * expression reduction functions - * will modify expressions that have - * multiple references which can - * cause unwanted side effects. - */ - dup_expr = expr_copy(menu->visibility); +struct property *menu_add_prompt(enum prop_type type, char *prompt, + struct expr *dep) +{ + struct property *prop = menu_add_prop(type, NULL, dep); - prop->visible.expr - = expr_alloc_and(prop->visible.expr, - dup_expr); - } - } + if (isspace(*prompt)) { + prop_warn(prop, "leading whitespace ignored"); + while (isspace(*prompt)) + prompt++; + } + if (current_entry->prompt) + prop_warn(prop, "prompt redefined"); - current_entry->prompt = prop; + /* Apply all upper menus' visibilities to actual prompts. */ + if (type == P_PROMPT) { + struct menu *menu = current_entry; + + while ((menu = menu->parent) != NULL) { + struct expr *dup_expr; + + if (!menu->visibility) + continue; + /* + * Do not add a reference to the menu's visibility + * expression but use a copy of it. Otherwise the + * expression reduction functions will modify + * expressions that have multiple references which + * can cause unwanted side effects. + */ + dup_expr = expr_copy(menu->visibility); + + prop->visible.expr = expr_alloc_and(prop->visible.expr, + dup_expr); + } } + + current_entry->prompt = prop; prop->text = prompt; return prop; } -struct property *menu_add_prompt(enum prop_type type, char *prompt, struct expr *dep) -{ - return menu_add_prop(type, prompt, NULL, dep); -} - void menu_add_visibility(struct expr *expr) { current_entry->visibility = expr_alloc_and(current_entry->visibility, @@ -187,12 +203,12 @@ void menu_add_visibility(struct expr *expr) void menu_add_expr(enum prop_type type, struct expr *expr, struct expr *dep) { - menu_add_prop(type, NULL, expr, dep); + menu_add_prop(type, expr, dep); } void menu_add_symbol(enum prop_type type, struct symbol *sym, struct expr *dep) { - menu_add_prop(type, NULL, expr_alloc_symbol(sym), dep); + menu_add_prop(type, expr_alloc_symbol(sym), dep); } void menu_add_option_modules(void) @@ -326,12 +342,10 @@ void menu_finalize(struct menu *parent) * choice value symbols. */ parentdep = expr_alloc_symbol(sym); - } else if (parent->prompt) - /* Menu node for 'menu' */ - parentdep = parent->prompt->visible.expr; - else - /* Menu node for 'if' */ + } else { + /* Menu node for 'menu', 'if' */ parentdep = parent->dep; + } /* For each child menu node... */ for (menu = parent->list; menu; menu = menu->next) { @@ -698,6 +712,21 @@ const char *menu_get_help(struct menu *menu) return ""; } +static void get_def_str(struct gstr *r, struct menu *menu) +{ + str_printf(r, "Defined at %s:%d\n", + menu->file->name, menu->lineno); +} + +static void get_dep_str(struct gstr *r, struct expr *expr, const char *prefix) +{ + if (!expr_is_yes(expr)) { + str_append(r, prefix); + expr_gstr_print(expr, r); + str_append(r, "\n"); + } +} + static void get_prompt_str(struct gstr *r, struct property *prop, struct list_head *head) { @@ -705,7 +734,20 @@ static void get_prompt_str(struct gstr *r, struct property *prop, struct menu *submenu[8], *menu, *location = NULL; struct jump_key *jump = NULL; - str_printf(r, "Prompt: %s\n", prop->text); + str_printf(r, " Prompt: %s\n", prop->text); + + get_dep_str(r, prop->menu->dep, " Depends on: "); + /* + * Most prompts in Linux have visibility that exactly matches their + * dependencies. For these, we print only the dependencies to improve + * readability. However, prompts with inline "if" expressions and + * prompts with a parent that has a "visible if" expression have + * differing dependencies and visibility. In these rare cases, we + * print both. + */ + if (!expr_eq(prop->menu->dep, prop->visible.expr)) + get_dep_str(r, prop->visible.expr, " Visible if: "); + menu = prop->menu->parent; for (i = 0; menu != &rootmenu && i < 8; menu = menu->parent) { bool accessible = menu_is_visible(menu); @@ -755,18 +797,6 @@ static void get_prompt_str(struct gstr *r, struct property *prop, } } -/* - * get property of type P_SYMBOL - */ -static struct property *get_symbol_prop(struct symbol *sym) -{ - struct property *prop = NULL; - - for_all_properties(sym, prop, P_SYMBOL) - break; - return prop; -} - static void get_symbol_props_str(struct gstr *r, struct symbol *sym, enum prop_type tok, const char *prefix) { @@ -806,32 +836,34 @@ static void get_symbol_str(struct gstr *r, struct symbol *sym, } } } - for_all_prompts(sym, prop) - get_prompt_str(r, prop, head); - - prop = get_symbol_prop(sym); - if (prop) { - str_printf(r, " Defined at %s:%d\n", prop->menu->file->name, - prop->menu->lineno); - if (!expr_is_yes(prop->visible.expr)) { - str_append(r, " Depends on: "); - expr_gstr_print(prop->visible.expr, r); - str_append(r, "\n"); + + /* Print the definitions with prompts before the ones without */ + for_all_properties(sym, prop, P_SYMBOL) { + if (prop->menu->prompt) { + get_def_str(r, prop->menu); + get_prompt_str(r, prop->menu->prompt, head); + } + } + + for_all_properties(sym, prop, P_SYMBOL) { + if (!prop->menu->prompt) { + get_def_str(r, prop->menu); + get_dep_str(r, prop->menu->dep, " Depends on: "); } } - get_symbol_props_str(r, sym, P_SELECT, " Selects: "); + get_symbol_props_str(r, sym, P_SELECT, "Selects: "); if (sym->rev_dep.expr) { - expr_gstr_print_revdep(sym->rev_dep.expr, r, yes, " Selected by [y]:\n"); - expr_gstr_print_revdep(sym->rev_dep.expr, r, mod, " Selected by [m]:\n"); - expr_gstr_print_revdep(sym->rev_dep.expr, r, no, " Selected by [n]:\n"); + expr_gstr_print_revdep(sym->rev_dep.expr, r, yes, "Selected by [y]:\n"); + expr_gstr_print_revdep(sym->rev_dep.expr, r, mod, "Selected by [m]:\n"); + expr_gstr_print_revdep(sym->rev_dep.expr, r, no, "Selected by [n]:\n"); } - get_symbol_props_str(r, sym, P_IMPLY, " Implies: "); + get_symbol_props_str(r, sym, P_IMPLY, "Implies: "); if (sym->implied.expr) { - expr_gstr_print_revdep(sym->implied.expr, r, yes, " Implied by [y]:\n"); - expr_gstr_print_revdep(sym->implied.expr, r, mod, " Implied by [m]:\n"); - expr_gstr_print_revdep(sym->implied.expr, r, no, " Implied by [n]:\n"); + expr_gstr_print_revdep(sym->implied.expr, r, yes, "Implied by [y]:\n"); + expr_gstr_print_revdep(sym->implied.expr, r, mod, "Implied by [m]:\n"); + expr_gstr_print_revdep(sym->implied.expr, r, no, "Implied by [n]:\n"); } str_append(r, "\n\n"); diff --git a/carl9170fw/config/parser.y b/carl9170fw/config/parser.y index b3eff96..190f111 100644 --- a/carl9170fw/config/parser.y +++ b/carl9170fw/config/parser.y @@ -90,7 +90,6 @@ static struct menu *current_menu, *current_entry; %left T_LESS T_LESS_EQUAL T_GREATER T_GREATER_EQUAL %nonassoc T_NOT -%type prompt %type nonconst_symbol %type symbol %type type logic_type default @@ -113,27 +112,31 @@ input: mainmenu_stmt stmt_list | stmt_list; /* mainmenu entry */ -mainmenu_stmt: T_MAINMENU prompt T_EOL +mainmenu_stmt: T_MAINMENU T_WORD_QUOTE T_EOL { menu_add_prompt(P_MENU, $2, NULL); }; stmt_list: /* empty */ - | stmt_list common_stmt + | stmt_list assignment_stmt | stmt_list choice_stmt + | stmt_list comment_stmt + | stmt_list config_stmt + | stmt_list if_stmt | stmt_list menu_stmt + | stmt_list menuconfig_stmt + | stmt_list source_stmt | stmt_list T_WORD error T_EOL { zconf_error("unknown statement \"%s\"", $2); } | stmt_list error T_EOL { zconf_error("invalid statement"); } ; -common_stmt: - if_stmt - | comment_stmt - | config_stmt - | menuconfig_stmt - | source_stmt - | assignment_stmt +stmt_list_in_choice: + /* empty */ + | stmt_list_in_choice comment_stmt + | stmt_list_in_choice config_stmt + | stmt_list_in_choice if_stmt_in_choice + | stmt_list_in_choice error T_EOL { zconf_error("invalid statement"); } ; /* config/menuconfig entry */ @@ -181,7 +184,7 @@ config_option: type prompt_stmt_opt T_EOL $1); }; -config_option: T_PROMPT prompt if_expr T_EOL +config_option: T_PROMPT T_WORD_QUOTE if_expr T_EOL { menu_add_prompt(P_PROMPT, $2, $3); printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); @@ -255,7 +258,7 @@ choice_end: end } }; -choice_stmt: choice_entry choice_block choice_end +choice_stmt: choice_entry stmt_list_in_choice choice_end ; choice_option_list: @@ -265,7 +268,7 @@ choice_option_list: | choice_option_list help ; -choice_option: T_PROMPT prompt if_expr T_EOL +choice_option: T_PROMPT T_WORD_QUOTE if_expr T_EOL { menu_add_prompt(P_PROMPT, $2, $3); printd(DEBUG_PARSE, "%s:%d:prompt\n", zconf_curname(), zconf_lineno()); @@ -306,11 +309,6 @@ default: | T_DEF_BOOL { $$ = S_BOOLEAN; } | T_DEF_TRISTATE { $$ = S_TRISTATE; } -choice_block: - /* empty */ - | choice_block common_stmt -; - /* if entry */ if_entry: T_IF expr T_EOL @@ -332,9 +330,12 @@ if_end: end if_stmt: if_entry stmt_list if_end ; +if_stmt_in_choice: if_entry stmt_list_in_choice if_end +; + /* menu entry */ -menu: T_MENU prompt T_EOL +menu: T_MENU T_WORD_QUOTE T_EOL { menu_add_entry(NULL); menu_add_prompt(P_MENU, $2, NULL); @@ -363,7 +364,7 @@ menu_option_list: | menu_option_list depends ; -source_stmt: T_SOURCE prompt T_EOL +source_stmt: T_SOURCE T_WORD_QUOTE T_EOL { printd(DEBUG_PARSE, "%s:%d:source %s\n", zconf_curname(), zconf_lineno(), $2); zconf_nextfile($2); @@ -372,7 +373,7 @@ source_stmt: T_SOURCE prompt T_EOL /* comment entry */ -comment: T_COMMENT prompt T_EOL +comment: T_COMMENT T_WORD_QUOTE T_EOL { menu_add_entry(NULL); menu_add_prompt(P_COMMENT, $2, NULL); @@ -429,15 +430,11 @@ visible: T_VISIBLE if_expr T_EOL prompt_stmt_opt: /* empty */ - | prompt if_expr + | T_WORD_QUOTE if_expr { menu_add_prompt(P_PROMPT, $1, $2); }; -prompt: T_WORD - | T_WORD_QUOTE -; - end: T_ENDMENU T_EOL { $$ = "menu"; } | T_ENDCHOICE T_EOL { $$ = "choice"; } | T_ENDIF T_EOL { $$ = "if"; } @@ -665,7 +662,7 @@ static void print_symbol(FILE *out, struct menu *menu) break; case P_SYMBOL: fputs( " symbol ", out); - fprintf(out, "%s\n", prop->sym->name); + fprintf(out, "%s\n", prop->menu->sym->name); break; default: fprintf(out, " unknown prop %d!\n", prop->type); diff --git a/carl9170fw/config/preprocess.c b/carl9170fw/config/preprocess.c index 0243086..0590f86 100644 --- a/carl9170fw/config/preprocess.c +++ b/carl9170fw/config/preprocess.c @@ -114,7 +114,7 @@ static char *do_error_if(int argc, char *argv[]) if (!strcmp(argv[0], "y")) pperror("%s", argv[1]); - return NULL; + return xstrdup(""); } static char *do_filename(int argc, char *argv[]) diff --git a/carl9170fw/config/symbol.c b/carl9170fw/config/symbol.c index f56eec5..fe38e6f 100644 --- a/carl9170fw/config/symbol.c +++ b/carl9170fw/config/symbol.c @@ -3,11 +3,11 @@ * Copyright (C) 2002 Roman Zippel */ +#include #include #include #include #include -#include #include "lkc.h" @@ -15,15 +15,21 @@ struct symbol symbol_yes = { .name = "y", .curr = { "y", yes }, .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_mod = { +}; + +struct symbol symbol_mod = { .name = "m", .curr = { "m", mod }, .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_no = { +}; + +struct symbol symbol_no = { .name = "n", .curr = { "n", no }, .flags = SYMBOL_CONST|SYMBOL_VALID, -}, symbol_empty = { +}; + +static struct symbol symbol_empty = { .name = "", .curr = { "", no }, .flags = SYMBOL_VALID, @@ -31,7 +37,7 @@ struct symbol symbol_yes = { struct symbol *sym_defconfig_list; struct symbol *modules_sym; -tristate modules_val; +static tristate modules_val; enum symbol_type sym_get_type(struct symbol *sym) { @@ -221,7 +227,7 @@ static void sym_calc_visibility(struct symbol *sym) sym_set_changed(sym); } tri = no; - if (sym->implied.expr && sym->dir_dep.tri != no) + if (sym->implied.expr) tri = expr_calc_value(sym->implied.expr); if (tri == mod && sym_get_type(sym) == S_BOOLEAN) tri = yes; @@ -394,6 +400,8 @@ void sym_calc_value(struct symbol *sym) if (sym->implied.tri != no) { sym->flags |= SYMBOL_WRITE; newval.tri = EXPR_OR(newval.tri, sym->implied.tri); + newval.tri = EXPR_AND(newval.tri, + sym->dir_dep.tri); } } calc_newval: @@ -401,8 +409,7 @@ void sym_calc_value(struct symbol *sym) sym_warn_unmet_dep(sym); newval.tri = EXPR_OR(newval.tri, sym->rev_dep.tri); } - if (newval.tri == mod && - (sym_get_type(sym) == S_BOOLEAN || sym->implied.tri == yes)) + if (newval.tri == mod && sym_get_type(sym) == S_BOOLEAN) newval.tri = yes; break; case S_STRING: @@ -484,8 +491,6 @@ bool sym_tristate_within_range(struct symbol *sym, tristate val) return false; if (sym->visible <= sym->rev_dep.tri) return false; - if (sym->implied.tri == yes && val == mod) - return false; if (sym_is_choice_value(sym) && sym->visible == yes) return val == yes; return val >= sym->rev_dep.tri && val <= sym->visible; @@ -832,7 +837,7 @@ struct symbol *sym_lookup(const char *name, int flags) memset(symbol, 0, sizeof(*symbol)); symbol->name = new_name; symbol->type = S_UNKNOWN; - symbol->flags |= flags; + symbol->flags = flags; symbol->next = symbol_hash[hash]; symbol_hash[hash] = symbol; @@ -1273,28 +1278,6 @@ struct symbol *sym_check_deps(struct symbol *sym) return sym2; } -struct property *prop_alloc(enum prop_type type, struct symbol *sym) -{ - struct property *prop; - struct property **propp; - - prop = xmalloc(sizeof(*prop)); - memset(prop, 0, sizeof(*prop)); - prop->type = type; - prop->sym = sym; - prop->file = current_file; - prop->lineno = zconf_lineno(); - - /* append property to the prop list of symbol */ - if (sym) { - for (propp = &sym->prop; *propp; propp = &(*propp)->next) - ; - *propp = prop; - } - - return prop; -} - struct symbol *prop_get_symbol(struct property *prop) { if (prop->expr && (prop->expr->type == E_SYMBOL || diff --git a/carl9170fw/include/linux/ch9.h b/carl9170fw/include/linux/ch9.h index 94e01bb..e10f879 100644 --- a/carl9170fw/include/linux/ch9.h +++ b/carl9170fw/include/linux/ch9.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ /* * This file holds USB constants and structures that are needed for * USB device APIs. These are used by the USB device model, which is @@ -45,9 +46,9 @@ * This bit flag is used in endpoint descriptors' bEndpointAddress field. * It's also one of three fields in control requests bRequestType. */ -#define USB_DIR_MASK 0x80 #define USB_DIR_OUT 0 /* to device */ #define USB_DIR_IN 0x80 /* to host */ +#define USB_DIR_MASK 0x80 /* * USB types, the second of three bRequestType fields @@ -88,6 +89,8 @@ #define USB_REQ_GET_INTERFACE 0x0A #define USB_REQ_SET_INTERFACE 0x0B #define USB_REQ_SYNCH_FRAME 0x0C +#define USB_REQ_SET_SEL 0x30 +#define USB_REQ_SET_ISOCH_DELAY 0x31 #define USB_REQ_SET_ENCRYPTION 0x0D /* Wireless USB */ #define USB_REQ_GET_ENCRYPTION 0x0E @@ -103,6 +106,13 @@ #define USB_REQ_LOOPBACK_DATA_READ 0x16 #define USB_REQ_SET_INTERFACE_DS 0x17 +/* specific requests for USB Power Delivery */ +#define USB_REQ_GET_PARTNER_PDO 20 +#define USB_REQ_GET_BATTERY_STATUS 21 +#define USB_REQ_SET_PDO 22 +#define USB_REQ_GET_VDM 23 +#define USB_REQ_SEND_VDM 24 + /* The Link Power Management (LPM) ECN defines USB_REQ_TEST_AND_SET command, * used by hubs to put ports into a new L1 suspend state, except that it * forgot to define its number ... @@ -124,8 +134,64 @@ #define USB_DEVICE_A_ALT_HNP_SUPPORT 5 /* (otg) other RH port does */ #define USB_DEVICE_DEBUG_MODE 6 /* (special devices only) */ +/* + * Test Mode Selectors + * See USB 2.0 spec Table 9-7 + */ +#define USB_TEST_J 1 +#define USB_TEST_K 2 +#define USB_TEST_SE0_NAK 3 +#define USB_TEST_PACKET 4 +#define USB_TEST_FORCE_ENABLE 5 + +/* Status Type */ +#define USB_STATUS_TYPE_STANDARD 0 +#define USB_STATUS_TYPE_PTM 1 + +/* + * New Feature Selectors as added by USB 3.0 + * See USB 3.0 spec Table 9-7 + */ +#define USB_DEVICE_U1_ENABLE 48 /* dev may initiate U1 transition */ +#define USB_DEVICE_U2_ENABLE 49 /* dev may initiate U2 transition */ +#define USB_DEVICE_LTM_ENABLE 50 /* dev may send LTM */ +#define USB_INTRF_FUNC_SUSPEND 0 /* function suspend */ + +#define USB_INTR_FUNC_SUSPEND_OPT_MASK 0xFF00 +/* + * Suspend Options, Table 9-8 USB 3.0 spec + */ +#define USB_INTRF_FUNC_SUSPEND_LP (1 << (8 + 0)) +#define USB_INTRF_FUNC_SUSPEND_RW (1 << (8 + 1)) + +/* + * Interface status, Figure 9-5 USB 3.0 spec + */ +#define USB_INTRF_STAT_FUNC_RW_CAP 1 +#define USB_INTRF_STAT_FUNC_RW 2 + #define USB_ENDPOINT_HALT 0 /* IN/OUT will STALL */ +/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */ +#define USB_DEV_STAT_U1_ENABLED 2 /* transition into U1 state */ +#define USB_DEV_STAT_U2_ENABLED 3 /* transition into U2 state */ +#define USB_DEV_STAT_LTM_ENABLED 4 /* Latency tolerance messages */ + +/* + * Feature selectors from Table 9-8 USB Power Delivery spec + */ +#define USB_DEVICE_BATTERY_WAKE_MASK 40 +#define USB_DEVICE_OS_IS_PD_AWARE 41 +#define USB_DEVICE_POLICY_MODE 42 +#define USB_PORT_PR_SWAP 43 +#define USB_PORT_GOTO_MIN 44 +#define USB_PORT_RETURN_POWER 45 +#define USB_PORT_ACCEPT_PD_REQUEST 46 +#define USB_PORT_REJECT_PD_REQUEST 47 +#define USB_PORT_PORT_PD_RESET 48 +#define USB_PORT_C_PORT_PD_CHANGE 49 +#define USB_PORT_CABLE_PD_RESET 50 +#define USB_DEVICE_CHARGING_POLICY 54 /** * struct usb_ctrlrequest - SETUP data for a USB device control request @@ -163,7 +229,8 @@ struct usb_ctrlrequest { * through the Linux-USB APIs, they are not converted to cpu byte * order; it is the responsibility of the client code to do this. * The single exception is when device and configuration descriptors (but - * not other descriptors) are read from usbfs (i.e. /proc/bus/usb/BBB/DDD); + * not other descriptors) are read from character devices + * (i.e. /dev/bus/usb/BBB/DDD); * in this case the fields are converted to host endianness by the kernel. */ @@ -192,8 +259,12 @@ struct usb_ctrlrequest { #define USB_DT_WIRE_ADAPTER 0x21 #define USB_DT_RPIPE 0x22 #define USB_DT_CS_RADIO_CONTROL 0x23 +/* From the T10 UAS specification */ +#define USB_DT_PIPE_USAGE 0x24 /* From the USB 3.0 spec */ #define USB_DT_SS_ENDPOINT_COMP 0x30 +/* From the USB 3.1 spec */ +#define USB_DT_SSP_ISOC_ENDPOINT_COMP 0x31 /* Conventional codes for class-specific descriptors. The convention is * defined in the USB "Common Class" Spec (3.11). Individual class specs @@ -255,6 +326,10 @@ struct usb_device_descriptor { #define USB_CLASS_CONTENT_SEC 0x0d /* content security */ #define USB_CLASS_VIDEO 0x0e #define USB_CLASS_WIRELESS_CONTROLLER 0xe0 +#define USB_CLASS_PERSONAL_HEALTHCARE 0x0f +#define USB_CLASS_AUDIO_VIDEO 0x10 +#define USB_CLASS_BILLBOARD 0x11 +#define USB_CLASS_USB_TYPE_C_BRIDGE 0x12 #define USB_CLASS_MISC 0xef #define USB_CLASS_APP_SPEC 0xfe #define USB_CLASS_VENDOR_SPEC 0xff @@ -293,6 +368,9 @@ struct usb_config_descriptor { /*-------------------------------------------------------------------------*/ +/* USB String descriptors can contain at most 126 characters. */ +#define USB_MAX_STRING_LEN 126 + /* USB_DT_STRING: String descriptor */ struct usb_string_descriptor { __u8 bLength; @@ -346,12 +424,6 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_NUMBER_MASK 0x0f /* in bEndpointAddress */ #define USB_ENDPOINT_DIR_MASK 0x80 -#define USB_ENDPOINT_SYNCTYPE 0x0c -#define USB_ENDPOINT_SYNC_NONE (0 << 2) -#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) -#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) -#define USB_ENDPOINT_SYNC_SYNC (3 << 2) - #define USB_ENDPOINT_XFERTYPE_MASK 0x03 /* in bmAttributes */ #define USB_ENDPOINT_XFER_CONTROL 0 #define USB_ENDPOINT_XFER_ISOC 1 @@ -359,6 +431,28 @@ struct usb_endpoint_descriptor { #define USB_ENDPOINT_XFER_INT 3 #define USB_ENDPOINT_MAX_ADJUSTABLE 0x80 +#define USB_ENDPOINT_MAXP_MASK 0x07ff +#define USB_EP_MAXP_MULT_SHIFT 11 +#define USB_EP_MAXP_MULT_MASK (3 << USB_EP_MAXP_MULT_SHIFT) +#define USB_EP_MAXP_MULT(m) \ + (((m) & USB_EP_MAXP_MULT_MASK) >> USB_EP_MAXP_MULT_SHIFT) + +/* The USB 3.0 spec redefines bits 5:4 of bmAttributes as interrupt ep type. */ +#define USB_ENDPOINT_INTRTYPE 0x30 +#define USB_ENDPOINT_INTR_PERIODIC (0 << 4) +#define USB_ENDPOINT_INTR_NOTIFICATION (1 << 4) + +#define USB_ENDPOINT_SYNCTYPE 0x0c +#define USB_ENDPOINT_SYNC_NONE (0 << 2) +#define USB_ENDPOINT_SYNC_ASYNC (1 << 2) +#define USB_ENDPOINT_SYNC_ADAPTIVE (2 << 2) +#define USB_ENDPOINT_SYNC_SYNC (3 << 2) + +#define USB_ENDPOINT_USAGE_MASK 0x30 +#define USB_ENDPOINT_USAGE_DATA 0x00 +#define USB_ENDPOINT_USAGE_FEEDBACK 0x10 +#define USB_ENDPOINT_USAGE_IMPLICIT_FB 0x20 /* Implicit feedback Data endpoint */ + /*-------------------------------------------------------------------------*/ /** @@ -457,8 +551,8 @@ static inline int usb_endpoint_xfer_int( static inline int usb_endpoint_xfer_isoc( const struct usb_endpoint_descriptor *epd) { - return (epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == - USB_ENDPOINT_XFER_ISOC; + return ((epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == + USB_ENDPOINT_XFER_ISOC); } /** @@ -539,6 +633,51 @@ static inline int usb_endpoint_is_isoc_out( return usb_endpoint_xfer_isoc(epd) && usb_endpoint_dir_out(epd); } +/** + * usb_endpoint_maxp - get endpoint's max packet size + * @epd: endpoint to be checked + * + * Returns @epd's max packet bits [10:0] + */ +static inline int usb_endpoint_maxp(const struct usb_endpoint_descriptor *epd) +{ + return le16_to_cpu(epd->wMaxPacketSize) & USB_ENDPOINT_MAXP_MASK; +} + +/** + * usb_endpoint_maxp_mult - get endpoint's transactional opportunities + * @epd: endpoint to be checked + * + * Return @epd's wMaxPacketSize[12:11] + 1 + */ +static inline int +usb_endpoint_maxp_mult(const struct usb_endpoint_descriptor *epd) +{ + int maxp = le16_to_cpu(epd->wMaxPacketSize); + + return USB_EP_MAXP_MULT(maxp) + 1; +} + +static inline int usb_endpoint_interrupt_type( + const struct usb_endpoint_descriptor *epd) +{ + return epd->bmAttributes & USB_ENDPOINT_INTRTYPE; +} + +/*-------------------------------------------------------------------------*/ + +/* USB_DT_SSP_ISOC_ENDPOINT_COMP: SuperSpeedPlus Isochronous Endpoint Companion + * descriptor + */ +struct usb_ssp_isoc_ep_comp_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __le16 wReseved; + __le32 dwBytesPerInterval; +} __attribute__ ((packed)); + +#define USB_DT_SSP_ISOC_EP_COMP_SIZE 8 + /*-------------------------------------------------------------------------*/ /* USB_DT_SS_ENDPOINT_COMP: SuperSpeed Endpoint Companion descriptor */ @@ -553,6 +692,30 @@ struct usb_ss_ep_comp_descriptor { #define USB_DT_SS_EP_COMP_SIZE 6 +/* Bits 4:0 of bmAttributes if this is a bulk endpoint */ +static inline int +usb_ss_max_streams(const struct usb_ss_ep_comp_descriptor *comp) +{ + int max_streams; + + if (!comp) + return 0; + + max_streams = comp->bmAttributes & 0x1f; + + if (!max_streams) + return 0; + + max_streams = 1 << max_streams; + + return max_streams; +} + +/* Bits 1:0 of bmAttributes if this is an isoc endpoint */ +#define USB_SS_MULT(p) (1 + ((p) & 0x3)) +/* Bit 7 of bmAttributes if a SSP isoc endpoint companion descriptor exists */ +#define USB_SS_SSP_ISOC_COMP(p) ((p) & (1 << 7)) + /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_QUALIFIER: Device Qualifier descriptor */ @@ -580,10 +743,23 @@ struct usb_otg_descriptor { __u8 bmAttributes; /* support for HNP, SRP, etc */ } __attribute__ ((packed)); +/* USB_DT_OTG (from OTG 2.0 supplement) */ +struct usb_otg20_descriptor { + __u8 bLength; + __u8 bDescriptorType; + + __u8 bmAttributes; /* support for HNP, SRP and ADP, etc */ + __le16 bcdOTG; /* OTG and EH supplement release number + * in binary-coded decimal(i.e. 2.0 is 0200H) + */ +} __attribute__ ((packed)); + /* from usb_otg_descriptor.bmAttributes */ #define USB_OTG_SRP (1 << 0) #define USB_OTG_HNP (1 << 1) /* swap host/device roles */ +#define USB_OTG_ADP (1 << 2) /* support ADP */ +#define OTG_STS_SELECTOR 0xF000 /* OTG status selector */ /*-------------------------------------------------------------------------*/ /* USB_DT_DEBUG: for special highspeed devices, replacing serial console */ @@ -611,6 +787,7 @@ struct usb_interface_assoc_descriptor { __u8 iFunction; } __attribute__ ((packed)); +#define USB_DT_INTERFACE_ASSOCIATION_SIZE 8 /*-------------------------------------------------------------------------*/ @@ -667,6 +844,7 @@ struct usb_bos_descriptor { __u8 bNumDeviceCaps; } __attribute__((packed)); +#define USB_DT_BOS_SIZE 5 /*-------------------------------------------------------------------------*/ /* USB_DT_DEVICE_CAPABILITY: grouped with BOS */ @@ -704,16 +882,209 @@ struct usb_wireless_cap_descriptor { /* Ultra Wide Band */ __u8 bReserved; } __attribute__((packed)); +#define USB_DT_USB_WIRELESS_CAP_SIZE 11 + +/* USB 2.0 Extension descriptor */ #define USB_CAP_TYPE_EXT 2 struct usb_ext_cap_descriptor { /* Link Power Management */ __u8 bLength; __u8 bDescriptorType; __u8 bDevCapabilityType; - __u8 bmAttributes; + __le32 bmAttributes; #define USB_LPM_SUPPORT (1 << 1) /* supports LPM */ +#define USB_BESL_SUPPORT (1 << 2) /* supports BESL */ +#define USB_BESL_BASELINE_VALID (1 << 3) /* Baseline BESL valid*/ +#define USB_BESL_DEEP_VALID (1 << 4) /* Deep BESL valid */ +#define USB_SET_BESL_BASELINE(p) (((p) & 0xf) << 8) +#define USB_SET_BESL_DEEP(p) (((p) & 0xf) << 12) +#define USB_GET_BESL_BASELINE(p) (((p) & (0xf << 8)) >> 8) +#define USB_GET_BESL_DEEP(p) (((p) & (0xf << 12)) >> 12) +} __attribute__((packed)); + +#define USB_DT_USB_EXT_CAP_SIZE 7 + +/* + * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB + * specific device level capabilities + */ +#define USB_SS_CAP_TYPE 3 +struct usb_ss_cap_descriptor { /* Link Power Management */ + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bmAttributes; +#define USB_LTM_SUPPORT (1 << 1) /* supports LTM */ + __le16 wSpeedSupported; +#define USB_LOW_SPEED_OPERATION (1) /* Low speed operation */ +#define USB_FULL_SPEED_OPERATION (1 << 1) /* Full speed operation */ +#define USB_HIGH_SPEED_OPERATION (1 << 2) /* High speed operation */ +#define USB_5GBPS_OPERATION (1 << 3) /* Operation at 5Gbps */ + __u8 bFunctionalitySupport; + __u8 bU1devExitLat; + __le16 bU2DevExitLat; +} __attribute__((packed)); + +#define USB_DT_USB_SS_CAP_SIZE 10 + +/* + * Container ID Capability descriptor: Defines the instance unique ID used to + * identify the instance across all operating modes + */ +#define CONTAINER_ID_TYPE 4 +struct usb_ss_container_id_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 ContainerID[16]; /* 128-bit number */ } __attribute__((packed)); +#define USB_DT_USB_SS_CONTN_ID_SIZE 20 + +/* + * SuperSpeed Plus USB Capability descriptor: Defines the set of + * SuperSpeed Plus USB specific device level capabilities + */ +#define USB_SSP_CAP_TYPE 0xa +struct usb_ssp_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __le32 bmAttributes; +#define USB_SSP_SUBLINK_SPEED_ATTRIBS (0x1f << 0) /* sublink speed entries */ +#define USB_SSP_SUBLINK_SPEED_IDS (0xf << 5) /* speed ID entries */ + __le16 wFunctionalitySupport; +#define USB_SSP_MIN_SUBLINK_SPEED_ATTRIBUTE_ID (0xf) +#define USB_SSP_MIN_RX_LANE_COUNT (0xf << 8) +#define USB_SSP_MIN_TX_LANE_COUNT (0xf << 12) + __le16 wReserved; + __le32 bmSublinkSpeedAttr[1]; /* list of sublink speed attrib entries */ +#define USB_SSP_SUBLINK_SPEED_SSID (0xf) /* sublink speed ID */ +#define USB_SSP_SUBLINK_SPEED_LSE (0x3 << 4) /* Lanespeed exponent */ +#define USB_SSP_SUBLINK_SPEED_ST (0x3 << 6) /* Sublink type */ +#define USB_SSP_SUBLINK_SPEED_RSVD (0x3f << 8) /* Reserved */ +#define USB_SSP_SUBLINK_SPEED_LP (0x3 << 14) /* Link protocol */ +#define USB_SSP_SUBLINK_SPEED_LSM (0xff << 16) /* Lanespeed mantissa */ +} __attribute__((packed)); + +/* + * USB Power Delivery Capability Descriptor: + * Defines capabilities for PD + */ +/* Defines the various PD Capabilities of this device */ +#define USB_PD_POWER_DELIVERY_CAPABILITY 0x06 +/* Provides information on each battery supported by the device */ +#define USB_PD_BATTERY_INFO_CAPABILITY 0x07 +/* The Consumer characteristics of a Port on the device */ +#define USB_PD_PD_CONSUMER_PORT_CAPABILITY 0x08 +/* The provider characteristics of a Port on the device */ +#define USB_PD_PD_PROVIDER_PORT_CAPABILITY 0x09 + +struct usb_pd_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; /* set to USB_PD_POWER_DELIVERY_CAPABILITY */ + __u8 bReserved; + __le32 bmAttributes; +#define USB_PD_CAP_BATTERY_CHARGING (1 << 1) /* supports Battery Charging specification */ +#define USB_PD_CAP_USB_PD (1 << 2) /* supports USB Power Delivery specification */ +#define USB_PD_CAP_PROVIDER (1 << 3) /* can provide power */ +#define USB_PD_CAP_CONSUMER (1 << 4) /* can consume power */ +#define USB_PD_CAP_CHARGING_POLICY (1 << 5) /* supports CHARGING_POLICY feature */ +#define USB_PD_CAP_TYPE_C_CURRENT (1 << 6) /* supports power capabilities defined in the USB Type-C Specification */ + +#define USB_PD_CAP_PWR_AC (1 << 8) +#define USB_PD_CAP_PWR_BAT (1 << 9) +#define USB_PD_CAP_PWR_USE_V_BUS (1 << 14) + + __le16 bmProviderPorts; /* Bit zero refers to the UFP of the device */ + __le16 bmConsumerPorts; + __le16 bcdBCVersion; + __le16 bcdPDVersion; + __le16 bcdUSBTypeCVersion; +} __attribute__((packed)); + +struct usb_pd_cap_battery_info_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + /* Index of string descriptor shall contain the user friendly name for this battery */ + __u8 iBattery; + /* Index of string descriptor shall contain the Serial Number String for this battery */ + __u8 iSerial; + __u8 iManufacturer; + __u8 bBatteryId; /* uniquely identifies this battery in status Messages */ + __u8 bReserved; + /* + * Shall contain the Battery Charge value above which this + * battery is considered to be fully charged but not necessarily + * “topped off.” + */ + __le32 dwChargedThreshold; /* in mWh */ + /* + * Shall contain the minimum charge level of this battery such + * that above this threshold, a device can be assured of being + * able to power up successfully (see Battery Charging 1.2). + */ + __le32 dwWeakThreshold; /* in mWh */ + __le32 dwBatteryDesignCapacity; /* in mWh */ + __le32 dwBatteryLastFullchargeCapacity; /* in mWh */ +} __attribute__((packed)); + +struct usb_pd_cap_consumer_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_CONSUMER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_CONSUMER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_CONSUMER_TYPE_C (1 << 2) /* USB Type-C Current */ + __le16 wMinVoltage; /* in 50mV units */ + __le16 wMaxVoltage; /* in 50mV units */ + __u16 wReserved; + __le32 dwMaxOperatingPower; /* in 10 mW - operating at steady state */ + __le32 dwMaxPeakPower; /* in 10mW units - operating at peak power */ + __le32 dwMaxPeakPowerTime; /* in 100ms units - duration of peak */ +#define USB_PD_CAP_CONSUMER_UNKNOWN_PEAK_POWER_TIME 0xffff +} __attribute__((packed)); + +struct usb_pd_cap_provider_port_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; + __u8 bReserved1; + __u8 bmCapabilities; +/* port will oerate under: */ +#define USB_PD_CAP_PROVIDER_BC (1 << 0) /* BC */ +#define USB_PD_CAP_PROVIDER_PD (1 << 1) /* PD */ +#define USB_PD_CAP_PROVIDER_TYPE_C (1 << 2) /* USB Type-C Current */ + __u8 bNumOfPDObjects; + __u8 bReserved2; + __le32 wPowerDataObject[]; +} __attribute__((packed)); + +/* + * Precision time measurement capability descriptor: advertised by devices and + * hubs that support PTM + */ +#define USB_PTM_CAP_TYPE 0xb +struct usb_ptm_cap_descriptor { + __u8 bLength; + __u8 bDescriptorType; + __u8 bDevCapabilityType; +} __attribute__((packed)); + +#define USB_DT_USB_PTM_ID_SIZE 3 +/* + * The size of the descriptor for the Sublink Speed Attribute Count + * (SSAC) specified in bmAttributes[4:0]. SSAC is zero-based + */ +#define USB_DT_USB_SSP_CAP_SIZE(ssac) (12 + (ssac + 1) * 4) + /*-------------------------------------------------------------------------*/ /* USB_DT_WIRELESS_ENDPOINT_COMP: companion descriptor associated with @@ -773,8 +1144,10 @@ enum usb_device_speed { USB_SPEED_HIGH, /* usb 2.0 */ USB_SPEED_WIRELESS, /* wireless (usb 2.5) */ USB_SPEED_SUPER, /* usb 3.0 */ + USB_SPEED_SUPER_PLUS, /* usb 3.1 */ }; + enum usb_device_state { /* NOTATTACHED isn't in the USB spec, and this state acts * the same as ATTACHED ... but it's clearer this way. @@ -800,4 +1173,59 @@ enum usb_device_state { */ }; +enum usb3_link_state { + USB3_LPM_U0 = 0, + USB3_LPM_U1, + USB3_LPM_U2, + USB3_LPM_U3 +}; + +/* + * A U1 timeout of 0x0 means the parent hub will reject any transitions to U1. + * 0xff means the parent hub will accept transitions to U1, but will not + * initiate a transition. + * + * A U1 timeout of 0x1 to 0x7F also causes the hub to initiate a transition to + * U1 after that many microseconds. Timeouts of 0x80 to 0xFE are reserved + * values. + * + * A U2 timeout of 0x0 means the parent hub will reject any transitions to U2. + * 0xff means the parent hub will accept transitions to U2, but will not + * initiate a transition. + * + * A U2 timeout of 0x1 to 0xFE also causes the hub to initiate a transition to + * U2 after N*256 microseconds. Therefore a U2 timeout value of 0x1 means a U2 + * idle timer of 256 microseconds, 0x2 means 512 microseconds, 0xFE means + * 65.024ms. + */ +#define USB3_LPM_DISABLED 0x0 +#define USB3_LPM_U1_MAX_TIMEOUT 0x7F +#define USB3_LPM_U2_MAX_TIMEOUT 0xFE +#define USB3_LPM_DEVICE_INITIATED 0xFF + +struct usb_set_sel_req { + __u8 u1_sel; + __u8 u1_pel; + __le16 u2_sel; + __le16 u2_pel; +} __attribute__ ((packed)); + +/* + * The Set System Exit Latency control transfer provides one byte each for + * U1 SEL and U1 PEL, so the max exit latency is 0xFF. U2 SEL and U2 PEL each + * are two bytes long. + */ +#define USB3_LPM_MAX_U1_SEL_PEL 0xFF +#define USB3_LPM_MAX_U2_SEL_PEL 0xFFFF + +/*-------------------------------------------------------------------------*/ + +/* + * As per USB compliance update, a device that is actively drawing + * more than 100mA from USB must report itself as bus-powered in + * the GetStatus(DEVICE) call. + * https://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34 + */ +#define USB_SELF_POWER_VBUS_MAX_DRAW 100 + #endif /* __LINUX_USB_CH9_H */ diff --git a/carl9170fw/include/linux/compiler.h b/carl9170fw/include/linux/compiler.h index 9ef76ec..e2656ae 100644 --- a/carl9170fw/include/linux/compiler.h +++ b/carl9170fw/include/linux/compiler.h @@ -25,6 +25,9 @@ #define __in_section(s) __attribute__((section("." # s))) #define __visible __attribute__((externally_visible)) +#define DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d)) + + #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) #define BUILD_BUG_ON_ZERO(e) (sizeof(char[1 - 2 * !!(e)]) - 1) @@ -101,4 +104,42 @@ static inline long IS_ERR_OR_NULL(const void *ptr) return !ptr || IS_ERR_VALUE((unsigned long)ptr); } +static inline unsigned int hweight8(unsigned int w) +{ + unsigned int res = w - ((w >> 1) & 0x55); + res = (res & 0x33) + ((res >> 2) & 0x33); + return (res + (res >> 4)) & 0x0F; +} + +static inline unsigned int hweight16(unsigned int w) +{ + unsigned int res = w - ((w >> 1) & 0x5555); + res = (res & 0x3333) + ((res >> 2) & 0x3333); + res = (res + (res >> 4)) & 0x0F0F; + return (res + (res >> 8)) & 0x00FF; +} + +/** + * DECLARE_FLEX_ARRAY() - Declare a flexible array usable in a union + * + * @TYPE: The type of each flexible array element + * @NAME: The name of the flexible array member + * + * In order to have a flexible array member in a union or alone in a + * struct, it needs to be wrapped in an anonymous struct with at least 1 + * named member, but that member can be empty. + */ +#define DECLARE_FLEX_ARRAY(TYPE, NAME) \ + struct { \ + struct { } __empty_ ## NAME; \ + TYPE NAME[]; \ + } + +#define __bf_shf(x) (__builtin_ffsll(x) - 1) + +#define FIELD_MAX(_mask) \ + ({ \ + (typeof(_mask))((_mask) >> __bf_shf(_mask)); \ + }) + #endif /* __SHARED_COMPILER_H */ diff --git a/carl9170fw/include/linux/ieee80211.h b/carl9170fw/include/linux/ieee80211.h index 46ce6cf..7229209 100644 --- a/carl9170fw/include/linux/ieee80211.h +++ b/carl9170fw/include/linux/ieee80211.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * IEEE 802.11 defines * @@ -8,10 +9,7 @@ * Copyright (c) 2006, Michael Wu * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH * Copyright (c) 2016 - 2017 Intel Deutschland GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. + * Copyright (c) 2018 - 2022 Intel Corporation */ #ifndef __LINUX_IEEE80211_H @@ -101,6 +99,54 @@ /* extension, added by 802.11ad */ #define IEEE80211_STYPE_DMG_BEACON 0x0000 +#define IEEE80211_STYPE_S1G_BEACON 0x0010 + +/* bits unique to S1G beacon */ +#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100 + +/* see 802.11ah-2016 9.9 NDP CMAC frames */ +#define IEEE80211_S1G_1MHZ_NDP_BITS 25 +#define IEEE80211_S1G_1MHZ_NDP_BYTES 4 +#define IEEE80211_S1G_2MHZ_NDP_BITS 37 +#define IEEE80211_S1G_2MHZ_NDP_BYTES 5 + +#define IEEE80211_NDP_FTYPE_CTS 0 +#define IEEE80211_NDP_FTYPE_CF_END 0 +#define IEEE80211_NDP_FTYPE_PS_POLL 1 +#define IEEE80211_NDP_FTYPE_ACK 2 +#define IEEE80211_NDP_FTYPE_PS_POLL_ACK 3 +#define IEEE80211_NDP_FTYPE_BA 4 +#define IEEE80211_NDP_FTYPE_BF_REPORT_POLL 5 +#define IEEE80211_NDP_FTYPE_PAGING 6 +#define IEEE80211_NDP_FTYPE_PREQ 7 + +#define SM64(f, v) ((((u64)v) << f##_S) & f) + +/* NDP CMAC frame fields */ +#define IEEE80211_NDP_FTYPE 0x0000000000000007 +#define IEEE80211_NDP_FTYPE_S 0x0000000000000000 + +/* 1M Probe Request 11ah 9.9.3.1.1 */ +#define IEEE80211_NDP_1M_PREQ_ANO 0x0000000000000008 +#define IEEE80211_NDP_1M_PREQ_ANO_S 3 +#define IEEE80211_NDP_1M_PREQ_CSSID 0x00000000000FFFF0 +#define IEEE80211_NDP_1M_PREQ_CSSID_S 4 +#define IEEE80211_NDP_1M_PREQ_RTYPE 0x0000000000100000 +#define IEEE80211_NDP_1M_PREQ_RTYPE_S 20 +#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000 +#define IEEE80211_NDP_1M_PREQ_RSV 0x0000000001E00000 +/* 2M Probe Request 11ah 9.9.3.1.2 */ +#define IEEE80211_NDP_2M_PREQ_ANO 0x0000000000000008 +#define IEEE80211_NDP_2M_PREQ_ANO_S 3 +#define IEEE80211_NDP_2M_PREQ_CSSID 0x0000000FFFFFFFF0 +#define IEEE80211_NDP_2M_PREQ_CSSID_S 4 +#define IEEE80211_NDP_2M_PREQ_RTYPE 0x0000001000000000 +#define IEEE80211_NDP_2M_PREQ_RTYPE_S 36 + +#define IEEE80211_ANO_NETTYPE_WILD 15 + +/* bits unique to S1G beacon */ +#define IEEE80211_S1G_BCN_NEXT_TBTT 0x100 /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */ #define IEEE80211_CTL_EXT_POLL 0x2000 @@ -117,6 +163,21 @@ #define IEEE80211_MAX_SN IEEE80211_SN_MASK #define IEEE80211_SN_MODULO (IEEE80211_MAX_SN + 1) + +/* PV1 Layout 11ah 9.8.3.1 */ +#define IEEE80211_PV1_FCTL_VERS 0x0003 +#define IEEE80211_PV1_FCTL_FTYPE 0x001c +#define IEEE80211_PV1_FCTL_STYPE 0x00e0 +#define IEEE80211_PV1_FCTL_TODS 0x0100 +#define IEEE80211_PV1_FCTL_MOREFRAGS 0x0200 +#define IEEE80211_PV1_FCTL_PM 0x0400 +#define IEEE80211_PV1_FCTL_MOREDATA 0x0800 +#define IEEE80211_PV1_FCTL_PROTECTED 0x1000 +#define IEEE80211_PV1_FCTL_END_SP 0x2000 +#define IEEE80211_PV1_FCTL_RELAYED 0x4000 +#define IEEE80211_PV1_FCTL_ACK_POLICY 0x8000 +#define IEEE80211_PV1_FCTL_CTL_EXT 0x0f00 + static inline bool ieee80211_sn_less(u16 sn1, u16 sn2) { return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1); @@ -144,6 +205,7 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2) #define IEEE80211_MAX_FRAG_THRESHOLD 2352 #define IEEE80211_MAX_RTS_THRESHOLD 2353 #define IEEE80211_MAX_AID 2007 +#define IEEE80211_MAX_AID_S1G 8191 #define IEEE80211_MAX_TIM_LEN 251 #define IEEE80211_MAX_MESH_PEERINGS 63 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section @@ -362,6 +424,17 @@ static inline bool ieee80211_is_data(__le16 fc) cpu_to_le16(IEEE80211_FTYPE_DATA); } +/** + * ieee80211_is_ext - check if type is IEEE80211_FTYPE_EXT + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_is_ext(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) == + cpu_to_le16(IEEE80211_FTYPE_EXT); +} + + /** * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set * @fc: frame control bytes in little-endian byteorder @@ -460,6 +533,40 @@ static inline bool ieee80211_is_beacon(__le16 fc) cpu_to_le16(IEEE80211_FTYPE_MGMT | IEEE80211_STYPE_BEACON); } +/** + * ieee80211_is_s1g_beacon - check if IEEE80211_FTYPE_EXT && + * IEEE80211_STYPE_S1G_BEACON + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_is_s1g_beacon(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | + IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON); +} + +/** + * ieee80211_next_tbtt_present - check if IEEE80211_FTYPE_EXT && + * IEEE80211_STYPE_S1G_BEACON && IEEE80211_S1G_BCN_NEXT_TBTT + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_next_tbtt_present(__le16 fc) +{ + return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE | IEEE80211_FCTL_STYPE)) == + cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON) && + fc & cpu_to_le16(IEEE80211_S1G_BCN_NEXT_TBTT); +} + +/** + * ieee80211_is_s1g_short_beacon - check if next tbtt present bit is set. Only + * true for S1G beacons when they're short. + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_is_s1g_short_beacon(__le16 fc) +{ + return ieee80211_is_s1g_beacon(fc) && ieee80211_next_tbtt_present(fc); +} + /** * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM * @fc: frame control bytes in little-endian byteorder @@ -626,6 +733,15 @@ static inline unsigned int ieee80211_hdrlen(__le16 fc) return hdrlen; } +/** + * ieee80211_is_any_nullfunc - check if frame is regular or QoS nullfunc frame + * @fc: frame control bytes in little-endian byteorder + */ +static inline bool ieee80211_is_any_nullfunc(__le16 fc) +{ + return (ieee80211_is_nullfunc(fc) || ieee80211_is_qos_nullfunc(fc)); +} + /** * ieee80211_is_bufferable_mmpdu - check if frame is bufferable MMPDU * @fc: frame control field in little-endian byteorder @@ -714,7 +830,7 @@ struct ieee80211_msrment_ie { u8 token; u8 mode; u8 type; - u8 request[0]; + u8 request[]; } __packed; /** @@ -813,6 +929,8 @@ enum mesh_config_capab_flags { IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING = 0x20, }; +#define IEEE80211_MESHCONF_FORM_CONNECTED_TO_GATE 0x1 + /** * mesh channel switch parameters element's flag indicator * @@ -852,6 +970,7 @@ enum ieee80211_ht_chanwidth_values { * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width + * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask * (the NSS value is the value of this field + 1) * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift @@ -859,16 +978,36 @@ enum ieee80211_ht_chanwidth_values { * using a beamforming steering matrix */ enum ieee80211_vht_opmode_bits { - IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 3, + IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK = 0x03, IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ = 0, IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ = 1, IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ = 2, IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ = 3, + IEEE80211_OPMODE_NOTIF_BW_160_80P80 = 0x04, IEEE80211_OPMODE_NOTIF_RX_NSS_MASK = 0x70, IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT = 4, IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF = 0x80, }; +/** + * enum ieee80211_s1g_chanwidth + * These are defined in IEEE802.11-2016ah Table 10-20 + * as BSS Channel Width + * + * @IEEE80211_S1G_CHANWIDTH_1MHZ: 1MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_2MHZ: 2MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_4MHZ: 4MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_8MHZ: 8MHz operating channel + * @IEEE80211_S1G_CHANWIDTH_16MHZ: 16MHz operating channel + */ +enum ieee80211_s1g_chanwidth { + IEEE80211_S1G_CHANWIDTH_1MHZ = 0, + IEEE80211_S1G_CHANWIDTH_2MHZ = 1, + IEEE80211_S1G_CHANWIDTH_4MHZ = 3, + IEEE80211_S1G_CHANWIDTH_8MHZ = 7, + IEEE80211_S1G_CHANWIDTH_16MHZ = 15, +}; + #define WLAN_SA_QUERY_TR_ID_LEN 2 #define WLAN_MEMBERSHIP_LEN 8 #define WLAN_USER_POSITION_LEN 16 @@ -883,6 +1022,118 @@ struct ieee80211_tpc_report_ie { u8 link_margin; } __packed; +#define IEEE80211_ADDBA_EXT_FRAG_LEVEL_MASK GENMASK(2, 1) +#define IEEE80211_ADDBA_EXT_FRAG_LEVEL_SHIFT 1 +#define IEEE80211_ADDBA_EXT_NO_FRAG BIT(0) +#define IEEE80211_ADDBA_EXT_BUF_SIZE_MASK GENMASK(7, 5) +#define IEEE80211_ADDBA_EXT_BUF_SIZE_SHIFT 10 + +struct ieee80211_addba_ext_ie { + u8 data; +} __packed; + +/** + * struct ieee80211_s1g_bcn_compat_ie + * + * S1G Beacon Compatibility element + */ +struct ieee80211_s1g_bcn_compat_ie { + __le16 compat_info; + __le16 beacon_int; + __le32 tsf_completion; +} __packed; + +/** + * struct ieee80211_s1g_oper_ie + * + * S1G Operation element + */ +struct ieee80211_s1g_oper_ie { + u8 ch_width; + u8 oper_class; + u8 primary_ch; + u8 oper_ch; + __le16 basic_mcs_nss; +} __packed; + +/** + * struct ieee80211_aid_response_ie + * + * AID Response element + */ +struct ieee80211_aid_response_ie { + __le16 aid; + u8 switch_count; + __le16 response_int; +} __packed; + +struct ieee80211_s1g_cap { + u8 capab_info[10]; + u8 supp_mcs_nss[5]; +} __packed; + +struct ieee80211_ext { + __le16 frame_control; + __le16 duration; + union { + struct { + u8 sa[6]; + __le32 timestamp; + u8 change_seq; + u8 variable[0]; + } __packed s1g_beacon; + struct { + u8 sa[6]; + __le32 timestamp; + u8 change_seq; + u8 next_tbtt[3]; + u8 variable[0]; + } __packed s1g_short_beacon; + } u; +} __packed __aligned(2); + +#define IEEE80211_TWT_CONTROL_NDP BIT(0) +#define IEEE80211_TWT_CONTROL_RESP_MODE BIT(1) +#define IEEE80211_TWT_CONTROL_NEG_TYPE_BROADCAST BIT(3) +#define IEEE80211_TWT_CONTROL_RX_DISABLED BIT(4) +#define IEEE80211_TWT_CONTROL_WAKE_DUR_UNIT BIT(5) + +#define IEEE80211_TWT_REQTYPE_REQUEST BIT(0) +#define IEEE80211_TWT_REQTYPE_SETUP_CMD GENMASK(3, 1) +#define IEEE80211_TWT_REQTYPE_TRIGGER BIT(4) +#define IEEE80211_TWT_REQTYPE_IMPLICIT BIT(5) +#define IEEE80211_TWT_REQTYPE_FLOWTYPE BIT(6) +#define IEEE80211_TWT_REQTYPE_FLOWID GENMASK(9, 7) +#define IEEE80211_TWT_REQTYPE_WAKE_INT_EXP GENMASK(14, 10) +#define IEEE80211_TWT_REQTYPE_PROTECTION BIT(15) + +enum ieee80211_twt_setup_cmd { + TWT_SETUP_CMD_REQUEST, + TWT_SETUP_CMD_SUGGEST, + TWT_SETUP_CMD_DEMAND, + TWT_SETUP_CMD_GROUPING, + TWT_SETUP_CMD_ACCEPT, + TWT_SETUP_CMD_ALTERNATE, + TWT_SETUP_CMD_DICTATE, + TWT_SETUP_CMD_REJECT, +}; + +struct ieee80211_twt_params { + __le16 req_type; + __le64 twt; + u8 min_twt_dur; + __le16 mantissa; + u8 channel; +} __packed; + +struct ieee80211_twt_setup { + u8 dialog_token; + u8 element_id; + u8 length; + u8 control; + u8 params[]; +} __packed; + struct ieee80211_mgmt { __le16 frame_control; __le16 duration; @@ -896,7 +1147,7 @@ struct ieee80211_mgmt { __le16 auth_transaction; __le16 status_code; /* possibly followed by Challenge text */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) auth; struct { __le16 reason_code; @@ -905,21 +1156,26 @@ struct ieee80211_mgmt { __le16 capab_info; __le16 listen_interval; /* followed by SSID and Supported rates */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) assoc_req; struct { __le16 capab_info; __le16 status_code; __le16 aid; /* followed by Supported rates */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) assoc_resp, reassoc_resp; + struct { + __le16 capab_info; + __le16 status_code; + u8 variable[]; + } __packed __aligned(4) s1g_assoc_resp, s1g_reassoc_resp; struct { __le16 capab_info; __le16 listen_interval; u8 current_ap[6]; /* followed by SSID and Supported rates */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) reassoc_req; struct { __le16 reason_code; @@ -930,11 +1186,11 @@ struct ieee80211_mgmt { __le16 capab_info; /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params, TIM */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) beacon; struct { /* only variable items: SSID, Supported rates */ - u8 variable[0]; + DECLARE_FLEX_ARRAY(u8, variable); } __packed __aligned(4) probe_req; struct { __le64 timestamp; @@ -942,7 +1198,7 @@ struct ieee80211_mgmt { __le16 capab_info; /* followed by some of SSID, Supported rates, * FH Params, DS Params, CF Params, IBSS Params */ - u8 variable[0]; + u8 variable[]; } __packed __aligned(4) probe_resp; struct { u8 category; @@ -951,16 +1207,16 @@ struct ieee80211_mgmt { u8 action_code; u8 dialog_token; u8 status_code; - u8 variable[0]; + u8 variable[]; } __packed wme_action; struct{ u8 action_code; - u8 variable[0]; + u8 variable[]; } __packed chan_switch; struct{ u8 action_code; struct ieee80211_ext_chansw_ie data; - u8 variable[0]; + u8 variable[]; } __packed ext_chan_switch; struct{ u8 action_code; @@ -975,6 +1231,8 @@ struct ieee80211_mgmt { __le16 capab; __le16 timeout; __le16 start_seq_num; + /* followed by BA Extension */ + u8 variable[]; } __packed addba_req; struct{ u8 action_code; @@ -990,11 +1248,11 @@ struct ieee80211_mgmt { } __packed delba; struct { u8 action_code; - u8 variable[0]; + u8 variable[]; } __packed self_prot; struct{ u8 action_code; - u8 variable[0]; + u8 variable[]; } __packed mesh_action; struct { u8 action; @@ -1038,8 +1296,12 @@ struct ieee80211_mgmt { u8 toa[6]; __le16 tod_error; __le16 toa_error; - u8 variable[0]; + u8 variable[]; } __packed ftm; + struct { + u8 action_code; + u8 variable[]; + } __packed s1g; } u; } __packed __aligned(4) action; } u __aligned(2); @@ -1048,6 +1310,8 @@ struct ieee80211_mgmt { /* Supported rates membership selectors */ #define BSS_MEMBERSHIP_SELECTOR_HT_PHY 127 #define BSS_MEMBERSHIP_SELECTOR_VHT_PHY 126 +#define BSS_MEMBERSHIP_SELECTOR_HE_PHY 122 +#define BSS_MEMBERSHIP_SELECTOR_SAE_H2E 123 /* mgmt header + 1 byte category code */ #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u) @@ -1451,11 +1715,15 @@ struct ieee80211_ht_operation { #define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800 /* - * A-PMDU buffer sizes - * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2) + * A-MPDU buffer sizes + * According to HT size varies from 8 to 64 frames + * HE adds the ability to have up to 256 frames. + * EHT adds the ability to have up to 1K frames. */ -#define IEEE80211_MIN_AMPDU_BUF 0x8 -#define IEEE80211_MAX_AMPDU_BUF 0x40 +#define IEEE80211_MIN_AMPDU_BUF 0x8 +#define IEEE80211_MAX_AMPDU_BUF_HT 0x40 +#define IEEE80211_MAX_AMPDU_BUF_HE 0x100 +#define IEEE80211_MAX_AMPDU_BUF_EHT 0x400 /* Spatial Multiplexing Power Save Modes (for capability) */ @@ -1476,13 +1744,16 @@ struct ieee80211_ht_operation { * STA can receive. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest RX data rate supported. - * The top 3 bits of this field are reserved. + * The top 3 bits of this field indicate the Maximum NSTS,total + * (a beamformee capability.) * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams * @tx_highest: Indicates highest long GI VHT PPDU data rate * STA can transmit. Rate expressed in units of 1 Mbps. * If this field is 0 this value should not be used to * consider the highest TX data rate supported. - * The top 3 bits of this field are reserved. + * The top 2 bits of this field are reserved, the + * 3rd bit from the top indiciates VHT Extended NSS BW + * Capability. */ struct ieee80211_vht_mcs_info { __le16 rx_mcs_map; @@ -1491,6 +1762,13 @@ struct ieee80211_vht_mcs_info { __le16 tx_highest; } __packed; +/* for rx_highest */ +#define IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT 13 +#define IEEE80211_VHT_MAX_NSTS_TOTAL_MASK (7 << IEEE80211_VHT_MAX_NSTS_TOTAL_SHIFT) + +/* for tx_highest */ +#define IEEE80211_VHT_EXT_NSS_BW_CAPABLE (1 << 13) + /** * enum ieee80211_vht_mcs_support - VHT MCS support definitions * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the @@ -1557,6 +1835,223 @@ struct ieee80211_vht_operation { __le16 basic_mcs_set; } __packed; +/** + * struct ieee80211_he_cap_elem - HE capabilities element + * + * This structure is the "HE capabilities element" fixed fields as + * described in P802.11ax_D4.0 section 9.4.2.242.2 and 9.4.2.242.3 + */ +struct ieee80211_he_cap_elem { + u8 mac_cap_info[6]; + u8 phy_cap_info[11]; +} __packed; + +#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN 5 + +/** + * enum ieee80211_he_mcs_support - HE MCS support definitions + * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the + * number of streams + * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported + * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported + * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported + * + * These definitions are used in each 2-bit subfield of the rx_mcs_* + * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are + * both split into 8 subfields by number of streams. These values indicate + * which MCSes are supported for the number of streams the value appears + * for. + */ +enum ieee80211_he_mcs_support { + IEEE80211_HE_MCS_SUPPORT_0_7 = 0, + IEEE80211_HE_MCS_SUPPORT_0_9 = 1, + IEEE80211_HE_MCS_SUPPORT_0_11 = 2, + IEEE80211_HE_MCS_NOT_SUPPORTED = 3, +}; + +/** + * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field + * + * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field + * described in P802.11ax_D2.0 section 9.4.2.237.4 + * + * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * widths less than 80MHz. + * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel + * width 160MHz. + * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for + * channel width 80p80MHz. + */ +struct ieee80211_he_mcs_nss_supp { + __le16 rx_mcs_80; + __le16 tx_mcs_80; + __le16 rx_mcs_160; + __le16 tx_mcs_160; + __le16 rx_mcs_80p80; + __le16 tx_mcs_80p80; +} __packed; + +/** + * struct ieee80211_he_operation - HE capabilities element + * + * This structure is the "HE operation element" fields as + * described in P802.11ax_D4.0 section 9.4.2.243 + */ +struct ieee80211_he_operation { + __le32 he_oper_params; + __le16 he_mcs_nss_set; + /* Optional 0,1,3,4,5,7 or 8 bytes: depends on @he_oper_params */ + u8 optional[]; +} __packed; + +/** + * struct ieee80211_he_spr - HE spatial reuse element + * + * This structure is the "HE spatial reuse element" element as + * described in P802.11ax_D4.0 section 9.4.2.241 + */ +struct ieee80211_he_spr { + u8 he_sr_control; + /* Optional 0 to 19 bytes: depends on @he_sr_control */ + u8 optional[]; +} __packed; + +/** + * struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field + * + * This structure is the "MU AC Parameter Record" fields as + * described in P802.11ax_D4.0 section 9.4.2.245 + */ +struct ieee80211_he_mu_edca_param_ac_rec { + u8 aifsn; + u8 ecw_min_max; + u8 mu_edca_timer; +} __packed; + +/** + * struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element + * + * This structure is the "MU EDCA Parameter Set element" fields as + * described in P802.11ax_D4.0 section 9.4.2.245 + */ +struct ieee80211_mu_edca_param_set { + u8 mu_qos_info; + struct ieee80211_he_mu_edca_param_ac_rec ac_be; + struct ieee80211_he_mu_edca_param_ac_rec ac_bk; + struct ieee80211_he_mu_edca_param_ac_rec ac_vi; + struct ieee80211_he_mu_edca_param_ac_rec ac_vo; +} __packed; + +#define IEEE80211_EHT_MCS_NSS_RX 0x0f +#define IEEE80211_EHT_MCS_NSS_TX 0xf0 + +/** + * struct ieee80211_eht_mcs_nss_supp_20mhz_only - EHT 20MHz only station max + * supported NSS for per MCS. + * + * For each field below, bits 0 - 3 indicate the maximal number of spatial + * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams + * for Tx. + * + * @rx_tx_mcs7_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 0 - 7. + * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 8 - 9. + * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 10 - 11. + * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 12 - 13. + */ +struct ieee80211_eht_mcs_nss_supp_20mhz_only { + u8 rx_tx_mcs7_max_nss; + u8 rx_tx_mcs9_max_nss; + u8 rx_tx_mcs11_max_nss; + u8 rx_tx_mcs13_max_nss; +}; + +/** + * struct ieee80211_eht_mcs_nss_supp_bw - EHT max supported NSS per MCS (except + * 20MHz only stations). + * + * For each field below, bits 0 - 3 indicate the maximal number of spatial + * streams for Rx, and bits 4 - 7 indicate the maximal number of spatial streams + * for Tx. + * + * @rx_tx_mcs9_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 0 - 9. + * @rx_tx_mcs11_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 10 - 11. + * @rx_tx_mcs13_max_nss: indicates the maximum number of spatial streams + * supported for reception and the maximum number of spatial streams + * supported for transmission for MCS 12 - 13. + */ +struct ieee80211_eht_mcs_nss_supp_bw { + u8 rx_tx_mcs9_max_nss; + u8 rx_tx_mcs11_max_nss; + u8 rx_tx_mcs13_max_nss; +}; + +/** + * struct ieee80211_eht_cap_elem_fixed - EHT capabilities fixed data + * + * This structure is the "EHT Capabilities element" fixed fields as + * described in P802.11be_D1.4 section 9.4.2.313. + * + * @mac_cap_info: MAC capabilities, see IEEE80211_EHT_MAC_CAP* + * @phy_cap_info: PHY capabilities, see IEEE80211_EHT_PHY_CAP* + */ +struct ieee80211_eht_cap_elem_fixed { + u8 mac_cap_info[2]; + u8 phy_cap_info[9]; +} __packed; + +/** + * struct ieee80211_eht_cap_elem - EHT capabilities element + * @fixed: fixed parts, see &ieee80211_eht_cap_elem_fixed + * @optional: optional parts + */ +struct ieee80211_eht_cap_elem { + struct ieee80211_eht_cap_elem_fixed fixed; + + /* + * Followed by: + * Supported EHT-MCS And NSS Set field: 4, 3, 6 or 9 octets. + * EHT PPE Thresholds field: variable length. + */ + u8 optional[]; +} __packed; + +/** + * struct ieee80211_eht_operation - eht operation element + * + * This structure is the "EHT Operation Element" fields as + * described in P802.11be_D1.4 section 9.4.2.311 + * + * FIXME: The spec is unclear how big the fields are, and doesn't + * indicate the "Disabled Subchannel Bitmap Present" in the + * structure (Figure 9-1002a) at all ... + */ +struct ieee80211_eht_operation { + u8 chan_width; + u8 ccfs; + u8 present_bm; + + u8 disable_subchannel_bitmap[]; +} __packed; + +#define IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT 0x1 /* 802.11ac VHT Capabilities */ #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895 0x00000000 @@ -1565,6 +2060,8 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_MAX_MPDU_MASK 0x00000003 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160MHZ 0x00000004 #define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_160_80PLUS80MHZ 0x00000008 +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_MASK 0x0000000C +#define IEEE80211_VHT_CAP_SUPP_CHAN_WIDTH_SHIFT 2 #define IEEE80211_VHT_CAP_RXLDPC 0x00000010 #define IEEE80211_VHT_CAP_SHORT_GI_80 0x00000020 #define IEEE80211_VHT_CAP_SHORT_GI_160 0x00000040 @@ -1574,6 +2071,7 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 #define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 #define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 +#define IEEE80211_VHT_CAP_RXSTBC_SHIFT 8 #define IEEE80211_VHT_CAP_SU_BEAMFORMER_CAPABLE 0x00000800 #define IEEE80211_VHT_CAP_SU_BEAMFORMEE_CAPABLE 0x00001000 #define IEEE80211_VHT_CAP_BEAMFORMEE_STS_SHIFT 13 @@ -1593,6 +2091,862 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_VHT_LINK_ADAPTATION_VHT_MRQ_MFB 0x0c000000 #define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN 0x10000000 #define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN 0x20000000 +#define IEEE80211_VHT_CAP_EXT_NSS_BW_SHIFT 30 +#define IEEE80211_VHT_CAP_EXT_NSS_BW_MASK 0xc0000000 + +/** + * ieee80211_get_vht_max_nss - return max NSS for a given bandwidth/MCS + * @cap: VHT capabilities of the peer + * @bw: bandwidth to use + * @mcs: MCS index to use + * @ext_nss_bw_capable: indicates whether or not the local transmitter + * (rate scaling algorithm) can deal with the new logic + * (dot11VHTExtendedNSSBWCapable) + * @max_vht_nss: current maximum NSS as advertised by the STA in + * operating mode notification, can be 0 in which case the + * capability data will be used to derive this (from MCS support) + * + * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can + * vary for a given BW/MCS. This function parses the data. + * + * Note: This function is exported by cfg80211. + */ +int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap, + enum ieee80211_vht_chanwidth bw, + int mcs, bool ext_nss_bw_capable, + unsigned int max_vht_nss); + +/** + * enum ieee80211_ap_reg_power - regulatory power for a Access Point + * + * @IEEE80211_REG_UNSET_AP: Access Point has no regulatory power mode + * @IEEE80211_REG_LPI: Indoor Access Point + * @IEEE80211_REG_SP: Standard power Access Point + * @IEEE80211_REG_VLP: Very low power Access Point + * @IEEE80211_REG_AP_POWER_AFTER_LAST: internal + * @IEEE80211_REG_AP_POWER_MAX: maximum value + */ +enum ieee80211_ap_reg_power { + IEEE80211_REG_UNSET_AP, + IEEE80211_REG_LPI_AP, + IEEE80211_REG_SP_AP, + IEEE80211_REG_VLP_AP, + IEEE80211_REG_AP_POWER_AFTER_LAST, + IEEE80211_REG_AP_POWER_MAX = + IEEE80211_REG_AP_POWER_AFTER_LAST - 1, +}; + +/** + * enum ieee80211_client_reg_power - regulatory power for a client + * + * @IEEE80211_REG_UNSET_CLIENT: Client has no regulatory power mode + * @IEEE80211_REG_DEFAULT_CLIENT: Default Client + * @IEEE80211_REG_SUBORDINATE_CLIENT: Subordinate Client + * @IEEE80211_REG_CLIENT_POWER_AFTER_LAST: internal + * @IEEE80211_REG_CLIENT_POWER_MAX: maximum value + */ +enum ieee80211_client_reg_power { + IEEE80211_REG_UNSET_CLIENT, + IEEE80211_REG_DEFAULT_CLIENT, + IEEE80211_REG_SUBORDINATE_CLIENT, + IEEE80211_REG_CLIENT_POWER_AFTER_LAST, + IEEE80211_REG_CLIENT_POWER_MAX = + IEEE80211_REG_CLIENT_POWER_AFTER_LAST - 1, +}; + +/* 802.11ax HE MAC capabilities */ +#define IEEE80211_HE_MAC_CAP0_HTC_HE 0x01 +#define IEEE80211_HE_MAC_CAP0_TWT_REQ 0x02 +#define IEEE80211_HE_MAC_CAP0_TWT_RES 0x04 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP 0x00 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1 0x08 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2 0x10 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3 0x18 +#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK 0x18 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1 0x00 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2 0x20 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4 0x40 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8 0x60 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16 0x80 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32 0xa0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64 0xc0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED 0xe0 +#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK 0xe0 + +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED 0x00 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128 0x01 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256 0x02 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512 0x03 +#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK 0x03 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US 0x00 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US 0x04 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US 0x08 +#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK 0x0c +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_1 0x00 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_2 0x10 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_3 0x20 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_4 0x30 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_5 0x40 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_6 0x50 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_7 0x60 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_8 0x70 +#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_RX_QOS_MASK 0x70 + +/* Link adaptation is split between byte HE_MAC_CAP1 and + * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE + * in which case the following values apply: + * 0 = No feedback. + * 1 = reserved. + * 2 = Unsolicited feedback. + * 3 = both + */ +#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION 0x80 + +#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION 0x01 +#define IEEE80211_HE_MAC_CAP2_ALL_ACK 0x02 +#define IEEE80211_HE_MAC_CAP2_TRS 0x04 +#define IEEE80211_HE_MAC_CAP2_BSR 0x08 +#define IEEE80211_HE_MAC_CAP2_BCAST_TWT 0x10 +#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP 0x20 +#define IEEE80211_HE_MAC_CAP2_MU_CASCADING 0x40 +#define IEEE80211_HE_MAC_CAP2_ACK_EN 0x80 + +#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL 0x02 +#define IEEE80211_HE_MAC_CAP3_OFDMA_RA 0x04 + +/* The maximum length of an A-MDPU is defined by the combination of the Maximum + * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the + * same field in the HE capabilities. + */ +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_0 0x00 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_1 0x08 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_2 0x10 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_EXT_3 0x18 +#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_MASK 0x18 +#define IEEE80211_HE_MAC_CAP3_AMSDU_FRAG 0x20 +#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED 0x40 +#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS 0x80 + +#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG 0x01 +#define IEEE80211_HE_MAC_CAP4_QTP 0x02 +#define IEEE80211_HE_MAC_CAP4_BQR 0x04 +#define IEEE80211_HE_MAC_CAP4_PSR_RESP 0x08 +#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP 0x10 +#define IEEE80211_HE_MAC_CAP4_OPS 0x20 +#define IEEE80211_HE_MAC_CAP4_AMSDU_IN_AMPDU 0x40 +/* Multi TID agg TX is split between byte #4 and #5 + * The value is a combination of B39,B40,B41 + */ +#define IEEE80211_HE_MAC_CAP4_MULTI_TID_AGG_TX_QOS_B39 0x80 + +#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B40 0x01 +#define IEEE80211_HE_MAC_CAP5_MULTI_TID_AGG_TX_QOS_B41 0x02 +#define IEEE80211_HE_MAC_CAP5_SUBCHAN_SELECTIVE_TRANSMISSION 0x04 +#define IEEE80211_HE_MAC_CAP5_UL_2x996_TONE_RU 0x08 +#define IEEE80211_HE_MAC_CAP5_OM_CTRL_UL_MU_DATA_DIS_RX 0x10 +#define IEEE80211_HE_MAC_CAP5_HE_DYNAMIC_SM_PS 0x20 +#define IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING 0x40 +#define IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX 0x80 + +#define IEEE80211_HE_VHT_MAX_AMPDU_FACTOR 20 +#define IEEE80211_HE_HT_MAX_AMPDU_FACTOR 16 +#define IEEE80211_HE_6GHZ_MAX_AMPDU_FACTOR 13 + +/* 802.11ax HE PHY capabilities */ +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G 0x04 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G 0x08 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G 0x10 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK_ALL 0x1e + +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G 0x20 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G 0x40 +#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK 0xfe + +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ 0x01 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ 0x02 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ 0x04 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ 0x08 +#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK 0x0f +#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A 0x10 +#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD 0x20 +#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US 0x40 +/* Midamble RX/TX Max NSTS is split between byte #2 and byte #3 */ +#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_TX_MAX_NSTS 0x80 + +#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_TX_MAX_NSTS 0x01 +#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US 0x02 +#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ 0x04 +#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ 0x08 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX 0x10 +#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX 0x20 + +/* Note that the meaning of UL MU below is different between an AP and a non-AP + * sta, where in the AP case it indicates support for Rx and in the non-AP sta + * case it indicates support for Tx. + */ +#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO 0x40 +#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO 0x80 + +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK 0x01 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK 0x02 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK 0x03 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2 0x04 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK 0x08 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK 0x10 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK 0x18 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1 0x00 +#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2 0x20 +#define IEEE80211_HE_PHY_CAP3_RX_PARTIAL_BW_SU_IN_20MHZ_MU 0x40 +#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER 0x80 + +#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE 0x01 +#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER 0x02 + +/* Minimal allowed value of Max STS under 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4 0x0c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5 0x10 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6 0x14 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7 0x18 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8 0x1c +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK 0x1c + +/* Minimal allowed value of Max STS above 80MHz is 3 */ +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4 0x60 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5 0x80 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6 0xa0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7 0xc0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8 0xe0 +#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK 0xe0 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2 0x01 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3 0x02 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4 0x03 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5 0x04 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6 0x05 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7 0x06 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8 0x07 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK 0x07 + +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1 0x00 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2 0x08 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3 0x10 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4 0x18 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5 0x20 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6 0x28 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7 0x30 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8 0x38 +#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK 0x38 + +#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK 0x40 +#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK 0x80 + +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU 0x01 +#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU 0x02 +#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMING_FB 0x04 +#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMING_PARTIAL_BW_FB 0x08 +#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB 0x10 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE 0x20 +#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO 0x40 +#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT 0x80 + +#define IEEE80211_HE_PHY_CAP7_PSR_BASED_SR 0x01 +#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_SUPP 0x02 +#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI 0x04 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_1 0x08 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_2 0x10 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_3 0x18 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_4 0x20 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_5 0x28 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_6 0x30 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_7 0x38 +#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK 0x38 +#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ 0x40 +#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ 0x80 + +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI 0x01 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G 0x02 +#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU 0x04 +#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU 0x08 +#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI 0x10 +#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_TX_2X_AND_1XLTF 0x20 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_242 0x00 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_484 0x40 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_996 0x80 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_2x996 0xc0 +#define IEEE80211_HE_PHY_CAP8_DCM_MAX_RU_MASK 0xc0 + +#define IEEE80211_HE_PHY_CAP9_LONGER_THAN_16_SIGB_OFDM_SYM 0x01 +#define IEEE80211_HE_PHY_CAP9_NON_TRIGGERED_CQI_FEEDBACK 0x02 +#define IEEE80211_HE_PHY_CAP9_TX_1024_QAM_LESS_THAN_242_TONE_RU 0x04 +#define IEEE80211_HE_PHY_CAP9_RX_1024_QAM_LESS_THAN_242_TONE_RU 0x08 +#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_COMP_SIGB 0x10 +#define IEEE80211_HE_PHY_CAP9_RX_FULL_BW_SU_USING_MU_WITH_NON_COMP_SIGB 0x20 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_0US 0x0 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_8US 0x1 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_16US 0x2 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_RESERVED 0x3 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_POS 6 +#define IEEE80211_HE_PHY_CAP9_NOMINAL_PKT_PADDING_MASK 0xc0 + +#define IEEE80211_HE_PHY_CAP10_HE_MU_M1RU_MAX_LTF 0x01 + +/* 802.11ax HE TX/RX MCS NSS Support */ +#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS (3) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS (6) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS (11) +#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK 0x07c0 +#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK 0xf800 + +/* TX/RX HE MCS Support field Highest MCS subfield encoding */ +enum ieee80211_he_highest_mcs_supported_subfield_enc { + HIGHEST_MCS_SUPPORTED_MCS7 = 0, + HIGHEST_MCS_SUPPORTED_MCS8, + HIGHEST_MCS_SUPPORTED_MCS9, + HIGHEST_MCS_SUPPORTED_MCS10, + HIGHEST_MCS_SUPPORTED_MCS11, +}; + +/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */ +static inline u8 +ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap) +{ + u8 count = 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) + count += 4; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G) + count += 4; + + return count; +} + +/* 802.11ax HE PPE Thresholds */ +#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS (1) +#define IEEE80211_PPE_THRES_NSS_POS (0) +#define IEEE80211_PPE_THRES_NSS_MASK (7) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU \ + (BIT(5) | BIT(6)) +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK 0x78 +#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS (3) +#define IEEE80211_PPE_THRES_INFO_PPET_SIZE (3) +#define IEEE80211_HE_PPE_THRES_INFO_HEADER_SIZE (7) + +/* + * Calculate 802.11ax HE capabilities IE PPE field size + * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8* + */ +static inline u8 +ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info) +{ + u8 n; + + if ((phy_cap_info[6] & + IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0) + return 0; + + n = hweight8(ppe_thres_hdr & + IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK); + n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >> + IEEE80211_PPE_THRES_NSS_POS)); + + /* + * Each pair is 6 bits, and we need to add the 7 "header" bits to the + * total size. + */ + n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7; + n = DIV_ROUND_UP(n, 8); + + return n; +} + +static inline bool ieee80211_he_capa_size_ok(const u8 *data, u8 len) +{ + const struct ieee80211_he_cap_elem *he_cap_ie_elem = (const void *)data; + u8 needed = sizeof(*he_cap_ie_elem); + + if (len < needed) + return false; + + needed += ieee80211_he_mcs_nss_size(he_cap_ie_elem); + if (len < needed) + return false; + + if (he_cap_ie_elem->phy_cap_info[6] & + IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) { + if (len < needed + 1) + return false; + needed += ieee80211_he_ppe_size(data[needed], + he_cap_ie_elem->phy_cap_info); + } + + return len >= needed; +} + +/* HE Operation defines */ +#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK 0x00000007 +#define IEEE80211_HE_OPERATION_TWT_REQUIRED 0x00000008 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK 0x00003ff0 +#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET 4 +#define IEEE80211_HE_OPERATION_VHT_OPER_INFO 0x00004000 +#define IEEE80211_HE_OPERATION_CO_HOSTED_BSS 0x00008000 +#define IEEE80211_HE_OPERATION_ER_SU_DISABLE 0x00010000 +#define IEEE80211_HE_OPERATION_6GHZ_OP_INFO 0x00020000 +#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK 0x3f000000 +#define IEEE80211_HE_OPERATION_BSS_COLOR_OFFSET 24 +#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR 0x40000000 +#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED 0x80000000 + +#define IEEE80211_6GHZ_CTRL_REG_LPI_AP 0 +#define IEEE80211_6GHZ_CTRL_REG_SP_AP 1 + +/** + * ieee80211_he_6ghz_oper - HE 6 GHz operation Information field + * @primary: primary channel + * @control: control flags + * @ccfs0: channel center frequency segment 0 + * @ccfs1: channel center frequency segment 1 + * @minrate: minimum rate (in 1 Mbps units) + */ +struct ieee80211_he_6ghz_oper { + u8 primary; +#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH 0x3 +#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_20MHZ 0 +#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_40MHZ 1 +#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_80MHZ 2 +#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_160MHZ 3 +#define IEEE80211_HE_6GHZ_OPER_CTRL_DUP_BEACON 0x4 +#define IEEE80211_HE_6GHZ_OPER_CTRL_REG_INFO 0x38 + u8 control; + u8 ccfs0; + u8 ccfs1; + u8 minrate; +} __packed; + +/* + * In "9.4.2.161 Transmit Power Envelope element" of "IEEE Std 802.11ax-2021", + * it show four types in "Table 9-275a-Maximum Transmit Power Interpretation + * subfield encoding", and two category for each type in "Table E-12-Regulatory + * Info subfield encoding in the United States". + * So it it totally max 8 Transmit Power Envelope element. + */ +#define IEEE80211_TPE_MAX_IE_COUNT 8 +/* + * In "Table 9-277—Meaning of Maximum Transmit Power Count subfield" + * of "IEEE Std 802.11ax™‐2021", the max power level is 8. + */ +#define IEEE80211_MAX_NUM_PWR_LEVEL 8 + +#define IEEE80211_TPE_MAX_POWER_COUNT 8 + +/* transmit power interpretation type of transmit power envelope element */ +enum ieee80211_tx_power_intrpt_type { + IEEE80211_TPE_LOCAL_EIRP, + IEEE80211_TPE_LOCAL_EIRP_PSD, + IEEE80211_TPE_REG_CLIENT_EIRP, + IEEE80211_TPE_REG_CLIENT_EIRP_PSD, +}; + +/** + * struct ieee80211_tx_pwr_env + * + * This structure represents the "Transmit Power Envelope element" + */ +struct ieee80211_tx_pwr_env { + u8 tx_power_info; + s8 tx_power[IEEE80211_TPE_MAX_POWER_COUNT]; +} __packed; + +#define IEEE80211_TX_PWR_ENV_INFO_COUNT 0x7 +#define IEEE80211_TX_PWR_ENV_INFO_INTERPRET 0x38 +#define IEEE80211_TX_PWR_ENV_INFO_CATEGORY 0xC0 + +/* + * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size + * @he_oper_ie: byte data of the He Operations IE, stating from the byte + * after the ext ID byte. It is assumed that he_oper_ie has at least + * sizeof(struct ieee80211_he_operation) bytes, the caller must have + * validated this. + * @return the actual size of the IE data (not including header), or 0 on error + */ +static inline u8 +ieee80211_he_oper_size(const u8 *he_oper_ie) +{ + const struct ieee80211_he_operation *he_oper = (const void *)he_oper_ie; + u8 oper_len = sizeof(struct ieee80211_he_operation); + u32 he_oper_params; + + /* Make sure the input is not NULL */ + if (!he_oper_ie) + return 0; + + /* Calc required length */ + he_oper_params = le32_to_cpu(he_oper->he_oper_params); + if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO) + oper_len += 3; + if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS) + oper_len++; + if (he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO) + oper_len += sizeof(struct ieee80211_he_6ghz_oper); + + /* Add the first byte (extension ID) to the total length */ + oper_len++; + + return oper_len; +} + +/** + * ieee80211_he_6ghz_oper - obtain 6 GHz operation field + * @he_oper: HE operation element (must be pre-validated for size) + * but may be %NULL + * + * Return: a pointer to the 6 GHz operation field, or %NULL + */ +static inline const struct ieee80211_he_6ghz_oper * +ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper) +{ + const u8 *ret = (const void *)&he_oper->optional; + u32 he_oper_params; + + if (!he_oper) + return NULL; + + he_oper_params = le32_to_cpu(he_oper->he_oper_params); + + if (!(he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO)) + return NULL; + if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO) + ret += 3; + if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS) + ret++; + + return (const void *)ret; +} + +/* HE Spatial Reuse defines */ +#define IEEE80211_HE_SPR_PSR_DISALLOWED BIT(0) +#define IEEE80211_HE_SPR_NON_SRG_OBSS_PD_SR_DISALLOWED BIT(1) +#define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT BIT(2) +#define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT BIT(3) +#define IEEE80211_HE_SPR_HESIGA_SR_VAL15_ALLOWED BIT(4) + +/* + * ieee80211_he_spr_size - calculate 802.11ax HE Spatial Reuse IE size + * @he_spr_ie: byte data of the He Spatial Reuse IE, stating from the byte + * after the ext ID byte. It is assumed that he_spr_ie has at least + * sizeof(struct ieee80211_he_spr) bytes, the caller must have validated + * this + * @return the actual size of the IE data (not including header), or 0 on error + */ +static inline u8 +ieee80211_he_spr_size(const u8 *he_spr_ie) +{ + const struct ieee80211_he_spr *he_spr = (const void *)he_spr_ie; + u8 spr_len = sizeof(struct ieee80211_he_spr); + u8 he_spr_params; + + /* Make sure the input is not NULL */ + if (!he_spr_ie) + return 0; + + /* Calc required length */ + he_spr_params = he_spr->he_sr_control; + if (he_spr_params & IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT) + spr_len++; + if (he_spr_params & IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT) + spr_len += 18; + + /* Add the first byte (extension ID) to the total length */ + spr_len++; + + return spr_len; +} + +/* S1G Capabilities Information field */ +#define IEEE80211_S1G_CAPABILITY_LEN 15 + +#define S1G_CAP0_S1G_LONG BIT(0) +#define S1G_CAP0_SGI_1MHZ BIT(1) +#define S1G_CAP0_SGI_2MHZ BIT(2) +#define S1G_CAP0_SGI_4MHZ BIT(3) +#define S1G_CAP0_SGI_8MHZ BIT(4) +#define S1G_CAP0_SGI_16MHZ BIT(5) +#define S1G_CAP0_SUPP_CH_WIDTH GENMASK(7, 6) + +#define S1G_SUPP_CH_WIDTH_2 0 +#define S1G_SUPP_CH_WIDTH_4 1 +#define S1G_SUPP_CH_WIDTH_8 2 +#define S1G_SUPP_CH_WIDTH_16 3 +#define S1G_SUPP_CH_WIDTH_MAX(cap) ((1 << FIELD_GET(S1G_CAP0_SUPP_CH_WIDTH, \ + cap[0])) << 1) + +#define S1G_CAP1_RX_LDPC BIT(0) +#define S1G_CAP1_TX_STBC BIT(1) +#define S1G_CAP1_RX_STBC BIT(2) +#define S1G_CAP1_SU_BFER BIT(3) +#define S1G_CAP1_SU_BFEE BIT(4) +#define S1G_CAP1_BFEE_STS GENMASK(7, 5) + +#define S1G_CAP2_SOUNDING_DIMENSIONS GENMASK(2, 0) +#define S1G_CAP2_MU_BFER BIT(3) +#define S1G_CAP2_MU_BFEE BIT(4) +#define S1G_CAP2_PLUS_HTC_VHT BIT(5) +#define S1G_CAP2_TRAVELING_PILOT GENMASK(7, 6) + +#define S1G_CAP3_RD_RESPONDER BIT(0) +#define S1G_CAP3_HT_DELAYED_BA BIT(1) +#define S1G_CAP3_MAX_MPDU_LEN BIT(2) +#define S1G_CAP3_MAX_AMPDU_LEN_EXP GENMASK(4, 3) +#define S1G_CAP3_MIN_MPDU_START GENMASK(7, 5) + +#define S1G_CAP4_UPLINK_SYNC BIT(0) +#define S1G_CAP4_DYNAMIC_AID BIT(1) +#define S1G_CAP4_BAT BIT(2) +#define S1G_CAP4_TIME_ADE BIT(3) +#define S1G_CAP4_NON_TIM BIT(4) +#define S1G_CAP4_GROUP_AID BIT(5) +#define S1G_CAP4_STA_TYPE GENMASK(7, 6) + +#define S1G_CAP5_CENT_AUTH_CONTROL BIT(0) +#define S1G_CAP5_DIST_AUTH_CONTROL BIT(1) +#define S1G_CAP5_AMSDU BIT(2) +#define S1G_CAP5_AMPDU BIT(3) +#define S1G_CAP5_ASYMMETRIC_BA BIT(4) +#define S1G_CAP5_FLOW_CONTROL BIT(5) +#define S1G_CAP5_SECTORIZED_BEAM GENMASK(7, 6) + +#define S1G_CAP6_OBSS_MITIGATION BIT(0) +#define S1G_CAP6_FRAGMENT_BA BIT(1) +#define S1G_CAP6_NDP_PS_POLL BIT(2) +#define S1G_CAP6_RAW_OPERATION BIT(3) +#define S1G_CAP6_PAGE_SLICING BIT(4) +#define S1G_CAP6_TXOP_SHARING_IMP_ACK BIT(5) +#define S1G_CAP6_VHT_LINK_ADAPT GENMASK(7, 6) + +#define S1G_CAP7_TACK_AS_PS_POLL BIT(0) +#define S1G_CAP7_DUP_1MHZ BIT(1) +#define S1G_CAP7_MCS_NEGOTIATION BIT(2) +#define S1G_CAP7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3) +#define S1G_CAP7_NDP_BFING_REPORT_POLL BIT(4) +#define S1G_CAP7_UNSOLICITED_DYN_AID BIT(5) +#define S1G_CAP7_SECTOR_TRAINING_OPERATION BIT(6) +#define S1G_CAP7_TEMP_PS_MODE_SWITCH BIT(7) + +#define S1G_CAP8_TWT_GROUPING BIT(0) +#define S1G_CAP8_BDT BIT(1) +#define S1G_CAP8_COLOR GENMASK(4, 2) +#define S1G_CAP8_TWT_REQUEST BIT(5) +#define S1G_CAP8_TWT_RESPOND BIT(6) +#define S1G_CAP8_PV1_FRAME BIT(7) + +#define S1G_CAP9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0) + +#define S1G_OPER_CH_WIDTH_PRIMARY_1MHZ BIT(0) +#define S1G_OPER_CH_WIDTH_OPER GENMASK(4, 1) + +/* EHT MAC capabilities as defined in P802.11be_D1.4 section 9.4.2.313.2 */ +#define IEEE80211_EHT_MAC_CAP0_NSEP_PRIO_ACCESS 0x01 +#define IEEE80211_EHT_MAC_CAP0_OM_CONTROL 0x02 +#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE1 0x04 +#define IEEE80211_EHT_MAC_CAP0_TRIG_TXOP_SHARING_MODE2 0x08 +#define IEEE80211_EHT_MAC_CAP0_RESTRICTED_TWT 0x10 +#define IEEE80211_EHT_MAC_CAP0_SCS_TRAFFIC_DESC 0x20 +#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_MASK 0xc0 +#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_3895 0 +#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_7991 1 +#define IEEE80211_EHT_MAC_CAP0_MAX_AMPDU_LEN_11454 2 + +/* EHT PHY capabilities as defined in P802.11be_D1.4 section 9.4.2.313.3 */ +#define IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ 0x02 +#define IEEE80211_EHT_PHY_CAP0_242_TONE_RU_GT20MHZ 0x04 +#define IEEE80211_EHT_PHY_CAP0_NDP_4_EHT_LFT_32_GI 0x08 +#define IEEE80211_EHT_PHY_CAP0_PARTIAL_BW_UL_MU_MIMO 0x10 +#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMER 0x20 +#define IEEE80211_EHT_PHY_CAP0_SU_BEAMFORMEE 0x40 + +/* EHT beamformee number of spatial streams <= 80MHz is split */ +#define IEEE80211_EHT_PHY_CAP0_BEAMFORMEE_SS_80MHZ_MASK 0x80 +#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_80MHZ_MASK 0x03 + +#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_160MHZ_MASK 0x1c +#define IEEE80211_EHT_PHY_CAP1_BEAMFORMEE_SS_320MHZ_MASK 0xe0 + +#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_80MHZ_MASK 0x07 +#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_160MHZ_MASK 0x38 + +/* EHT number of sounding dimensions for 320MHz is split */ +#define IEEE80211_EHT_PHY_CAP2_SOUNDING_DIM_320MHZ_MASK 0xc0 +#define IEEE80211_EHT_PHY_CAP3_SOUNDING_DIM_320MHZ_MASK 0x01 +#define IEEE80211_EHT_PHY_CAP3_NG_16_SU_FEEDBACK 0x02 +#define IEEE80211_EHT_PHY_CAP3_NG_16_MU_FEEDBACK 0x04 +#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_4_2_SU_FDBK 0x08 +#define IEEE80211_EHT_PHY_CAP3_CODEBOOK_7_5_MU_FDBK 0x10 +#define IEEE80211_EHT_PHY_CAP3_TRIG_SU_BF_FDBK 0x20 +#define IEEE80211_EHT_PHY_CAP3_TRIG_MU_BF_PART_BW_FDBK 0x40 +#define IEEE80211_EHT_PHY_CAP3_TRIG_CQI_FDBK 0x80 + +#define IEEE80211_EHT_PHY_CAP4_PART_BW_DL_MU_MIMO 0x01 +#define IEEE80211_EHT_PHY_CAP4_PSR_SR_SUPP 0x02 +#define IEEE80211_EHT_PHY_CAP4_POWER_BOOST_FACT_SUPP 0x04 +#define IEEE80211_EHT_PHY_CAP4_EHT_MU_PPDU_4_EHT_LTF_08_GI 0x08 +#define IEEE80211_EHT_PHY_CAP4_MAX_NC_MASK 0xf0 + +#define IEEE80211_EHT_PHY_CAP5_NON_TRIG_CQI_FEEDBACK 0x01 +#define IEEE80211_EHT_PHY_CAP5_TX_LESS_242_TONE_RU_SUPP 0x02 +#define IEEE80211_EHT_PHY_CAP5_RX_LESS_242_TONE_RU_SUPP 0x04 +#define IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT 0x08 +#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_MASK 0x30 +#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_0US 0 +#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_8US 1 +#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_16US 2 +#define IEEE80211_EHT_PHY_CAP5_COMMON_NOMINAL_PKT_PAD_20US 3 + +/* Maximum number of supported EHT LTF is split */ +#define IEEE80211_EHT_PHY_CAP5_MAX_NUM_SUPP_EHT_LTF_MASK 0xc0 +#define IEEE80211_EHT_PHY_CAP6_MAX_NUM_SUPP_EHT_LTF_MASK 0x07 + +#define IEEE80211_EHT_PHY_CAP6_MCS15_SUPP_MASK 0x78 +#define IEEE80211_EHT_PHY_CAP6_EHT_DUP_6GHZ_SUPP 0x80 + +#define IEEE80211_EHT_PHY_CAP7_20MHZ_STA_RX_NDP_WIDER_BW 0x01 +#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_80MHZ 0x02 +#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_160MHZ 0x04 +#define IEEE80211_EHT_PHY_CAP7_NON_OFDMA_UL_MU_MIMO_320MHZ 0x08 +#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_80MHZ 0x10 +#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_160MHZ 0x20 +#define IEEE80211_EHT_PHY_CAP7_MU_BEAMFORMER_320MHZ 0x40 +#define IEEE80211_EHT_PHY_CAP7_TB_SOUNDING_FDBK_RATE_LIMIT 0x80 + +#define IEEE80211_EHT_PHY_CAP8_RX_1024QAM_WIDER_BW_DL_OFDMA 0x01 +#define IEEE80211_EHT_PHY_CAP8_RX_4096QAM_WIDER_BW_DL_OFDMA 0x02 + +/* + * EHT operation channel width as defined in P802.11be_D1.4 section 9.4.2.311 + */ +#define IEEE80211_EHT_OPER_CHAN_WIDTH 0x7 +#define IEEE80211_EHT_OPER_CHAN_WIDTH_20MHZ 0 +#define IEEE80211_EHT_OPER_CHAN_WIDTH_40MHZ 1 +#define IEEE80211_EHT_OPER_CHAN_WIDTH_80MHZ 2 +#define IEEE80211_EHT_OPER_CHAN_WIDTH_160MHZ 3 +#define IEEE80211_EHT_OPER_CHAN_WIDTH_320MHZ 4 + +/* Calculate 802.11be EHT capabilities IE Tx/Rx EHT MCS NSS Support Field size */ +static inline u8 +ieee80211_eht_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap, + const struct ieee80211_eht_cap_elem_fixed *eht_cap) +{ + u8 count = 0; + + /* on 2.4 GHz, if it supports 40 MHz, the result is 3 */ + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G) + return 3; + + /* on 2.4 GHz, these three bits are reserved, so should be 0 */ + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G) + count += 3; + + if (he_cap->phy_cap_info[0] & + IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G) + count += 3; + + if (eht_cap->phy_cap_info[0] & IEEE80211_EHT_PHY_CAP0_320MHZ_IN_6GHZ) + count += 3; + + return count ? count : 4; +} + +/* 802.11be EHT PPE Thresholds */ +#define IEEE80211_EHT_PPE_THRES_NSS_POS 0 +#define IEEE80211_EHT_PPE_THRES_NSS_MASK 0xf +#define IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK 0x1f0 +#define IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE 3 +#define IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE 9 + +/* + * Calculate 802.11be EHT capabilities IE EHT field size + */ +static inline u8 +ieee80211_eht_ppe_size(u16 ppe_thres_hdr, const u8 *phy_cap_info) +{ + u32 n; + + if (!(phy_cap_info[5] & + IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT)) + return 0; + + n = hweight16(ppe_thres_hdr & + IEEE80211_EHT_PPE_THRES_RU_INDEX_BITMASK_MASK); + n *= 1 + (ppe_thres_hdr & IEEE80211_EHT_PPE_THRES_NSS_MASK); + + /* + * Each pair is 6 bits, and we need to add the 9 "header" bits to the + * total size. + */ + n = n * IEEE80211_EHT_PPE_THRES_INFO_PPET_SIZE * 2 + + IEEE80211_EHT_PPE_THRES_INFO_HEADER_SIZE; + return DIV_ROUND_UP(n, 8); +} + +static inline bool +ieee80211_eht_capa_size_ok(const u8 *he_capa, const u8 *data, u8 len) +{ + const struct ieee80211_eht_cap_elem_fixed *elem = (const void *)data; + u8 needed = sizeof(struct ieee80211_eht_cap_elem_fixed); + + if (len < needed || !he_capa) + return false; + + needed += ieee80211_eht_mcs_nss_size((const void *)he_capa, + (const void *)data); + if (len < needed) + return false; + + if (elem->phy_cap_info[5] & + IEEE80211_EHT_PHY_CAP5_PPE_THRESHOLD_PRESENT) { + u16 ppe_thres_hdr; + + if (len < needed + sizeof(ppe_thres_hdr)) + return false; + + ppe_thres_hdr = (data[needed] >> 8) + data[needed + 1]; + needed += ieee80211_eht_ppe_size(ppe_thres_hdr, + elem->phy_cap_info); + } + + return len >= needed; +} + +static inline bool +ieee80211_eht_oper_size_ok(const u8 *data, u8 len) +{ + const struct ieee80211_eht_operation *elem = (const void *)data; + u8 needed = sizeof(*elem); + + if (len < needed) + return false; + + if (elem->present_bm & IEEE80211_EHT_OPER_DISABLED_SUBCHANNEL_BITMAP_PRESENT) + needed += 2; + + return len >= needed; +} + +#define LISTEN_INT_USF GENMASK(15, 14) +#define LISTEN_INT_UI GENMASK(13, 0) + +#define IEEE80211_MAX_USF FIELD_MAX(LISTEN_INT_USF) +#define IEEE80211_MAX_UI FIELD_MAX(LISTEN_INT_UI) /* Authentication algorithms */ #define WLAN_AUTH_OPEN 0 @@ -1657,6 +3011,8 @@ struct ieee80211_vht_operation { #define IEEE80211_SPCT_MSR_RPRT_TYPE_BASIC 0 #define IEEE80211_SPCT_MSR_RPRT_TYPE_CCA 1 #define IEEE80211_SPCT_MSR_RPRT_TYPE_RPI 2 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_LCI 8 +#define IEEE80211_SPCT_MSR_RPRT_TYPE_CIVIC 11 /* 802.11g ERP information element */ #define WLAN_ERP_NON_ERP_PRESENT (1<<0) @@ -1744,6 +3100,8 @@ enum ieee80211_statuscode { /* 802.11ai */ WLAN_STATUS_FILS_AUTHENTICATION_FAILURE = 108, WLAN_STATUS_UNKNOWN_AUTHENTICATION_SERVER = 109, + WLAN_STATUS_SAE_HASH_TO_ELEMENT = 126, + WLAN_STATUS_SAE_PK = 127, }; @@ -1981,19 +3339,29 @@ enum ieee80211_eid { WLAN_EID_VHT_OPERATION = 192, WLAN_EID_EXTENDED_BSS_LOAD = 193, WLAN_EID_WIDE_BW_CHANNEL_SWITCH = 194, - WLAN_EID_VHT_TX_POWER_ENVELOPE = 195, + WLAN_EID_TX_POWER_ENVELOPE = 195, WLAN_EID_CHANNEL_SWITCH_WRAPPER = 196, WLAN_EID_AID = 197, WLAN_EID_QUIET_CHANNEL = 198, WLAN_EID_OPMODE_NOTIF = 199, + WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201, + + WLAN_EID_AID_REQUEST = 210, + WLAN_EID_AID_RESPONSE = 211, + WLAN_EID_S1G_BCN_COMPAT = 213, + WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214, + WLAN_EID_S1G_TWT = 216, + WLAN_EID_S1G_CAPABILITIES = 217, WLAN_EID_VENDOR_SPECIFIC = 221, WLAN_EID_QOS_PARAMETER = 222, + WLAN_EID_S1G_OPERATION = 232, WLAN_EID_CAG_NUMBER = 237, WLAN_EID_AP_CSN = 239, WLAN_EID_FILS_INDICATION = 240, WLAN_EID_DILS = 241, WLAN_EID_FRAGMENT = 242, + WLAN_EID_RSNX = 244, WLAN_EID_EXTENSION = 255 }; @@ -2009,6 +3377,28 @@ enum ieee80211_eid_ext { WLAN_EID_EXT_FILS_WRAPPED_DATA = 8, WLAN_EID_EXT_FILS_PUBLIC_KEY = 12, WLAN_EID_EXT_FILS_NONCE = 13, + WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14, + WLAN_EID_EXT_HE_CAPABILITY = 35, + WLAN_EID_EXT_HE_OPERATION = 36, + WLAN_EID_EXT_UORA = 37, + WLAN_EID_EXT_HE_MU_EDCA = 38, + WLAN_EID_EXT_HE_SPR = 39, + WLAN_EID_EXT_NDP_FEEDBACK_REPORT_PARAMSET = 41, + WLAN_EID_EXT_BSS_COLOR_CHG_ANN = 42, + WLAN_EID_EXT_QUIET_TIME_PERIOD_SETUP = 43, + WLAN_EID_EXT_ESS_REPORT = 45, + WLAN_EID_EXT_OPS = 46, + WLAN_EID_EXT_HE_BSS_LOAD = 47, + WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52, + WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55, + WLAN_EID_EXT_NON_INHERITANCE = 56, + WLAN_EID_EXT_KNOWN_BSSID = 57, + WLAN_EID_EXT_SHORT_SSID_LIST = 58, + WLAN_EID_EXT_HE_6GHZ_CAPA = 59, + WLAN_EID_EXT_UL_MU_POWER_CAPA = 60, + WLAN_EID_EXT_EHT_OPERATION = 106, + WLAN_EID_EXT_EHT_MULTI_LINK = 107, + WLAN_EID_EXT_EHT_CAPABILITY = 108, }; /* Action category code */ @@ -2019,6 +3409,7 @@ enum ieee80211_category { WLAN_CATEGORY_BACK = 3, WLAN_CATEGORY_PUBLIC = 4, WLAN_CATEGORY_RADIO_MEASUREMENT = 5, + WLAN_CATEGORY_FAST_BBS_TRANSITION = 6, WLAN_CATEGORY_HT = 7, WLAN_CATEGORY_SA_QUERY = 8, WLAN_CATEGORY_PROTECTED_DUAL_OF_ACTION = 9, @@ -2033,6 +3424,7 @@ enum ieee80211_category { WLAN_CATEGORY_FST = 18, WLAN_CATEGORY_UNPROT_DMG = 20, WLAN_CATEGORY_VHT = 21, + WLAN_CATEGORY_S1G = 22, WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126, WLAN_CATEGORY_VENDOR_SPECIFIC = 127, }; @@ -2106,6 +3498,20 @@ enum ieee80211_key_len { WLAN_KEY_LEN_BIP_GMAC_256 = 32, }; +enum ieee80211_s1g_actioncode { + WLAN_S1G_AID_SWITCH_REQUEST, + WLAN_S1G_AID_SWITCH_RESPONSE, + WLAN_S1G_SYNC_CONTROL, + WLAN_S1G_STA_INFO_ANNOUNCE, + WLAN_S1G_EDCA_PARAM_SET, + WLAN_S1G_EL_OPERATION, + WLAN_S1G_TWT_SETUP, + WLAN_S1G_TWT_TEARDOWN, + WLAN_S1G_SECT_GROUP_ID_LIST, + WLAN_S1G_SECT_ID_FEEDBACK, + WLAN_S1G_TWT_INFORMATION = 11, +}; + #define IEEE80211_WEP_IV_LEN 4 #define IEEE80211_WEP_ICV_LEN 4 #define IEEE80211_CCMP_HDR_LEN 8 @@ -2129,7 +3535,8 @@ enum ieee80211_key_len { #define FILS_ERP_MAX_REALM_LEN 253 #define FILS_ERP_MAX_RRK_LEN 64 -#define PMK_MAX_LEN 48 +#define PMK_MAX_LEN 64 +#define SAE_PASSWORD_MAX_LEN 128 /* Public action codes (IEEE Std 802.11-2016, 9.6.8.1, Table 9-307) */ enum ieee80211_pub_actioncode { @@ -2190,7 +3597,17 @@ enum ieee80211_tdls_actioncode { */ #define WLAN_EXT_CAPA1_EXT_CHANNEL_SWITCHING BIT(2) -/* TDLS capabilities in the the 4th byte of @WLAN_EID_EXT_CAPABILITY */ +/* Multiple BSSID capability is set in the 6th bit of 3rd byte of the + * @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA3_MULTI_BSSID_SUPPORT BIT(6) + +/* Timing Measurement protocol for time sync is set in the 7th bit of 3rd byte + * of the @WLAN_EID_EXT_CAPABILITY information element + */ +#define WLAN_EXT_CAPA3_TIMING_MEASUREMENT_SUPPORT BIT(7) + +/* TDLS capabilities in the 4th byte of @WLAN_EID_EXT_CAPABILITY */ #define WLAN_EXT_CAPA4_TDLS_BUFFER_STA BIT(4) #define WLAN_EXT_CAPA4_TDLS_PEER_PSM BIT(5) #define WLAN_EXT_CAPA4_TDLS_CHAN_SWITCH BIT(6) @@ -2221,6 +3638,20 @@ enum ieee80211_tdls_actioncode { */ #define WLAN_EXT_CAPA9_FTM_INITIATOR BIT(7) +/* Defines support for TWT Requester and TWT Responder */ +#define WLAN_EXT_CAPA10_TWT_REQUESTER_SUPPORT BIT(5) +#define WLAN_EXT_CAPA10_TWT_RESPONDER_SUPPORT BIT(6) + +/* + * When set, indicates that the AP is able to tolerate 26-tone RU UL + * OFDMA transmissions using HE TB PPDU from OBSS (not falsely classify the + * 26-tone RU UL OFDMA transmissions as radar pulses). + */ +#define WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT BIT(7) + +/* Defines support for enhanced multi-bssid advertisement*/ +#define WLAN_EXT_CAPA11_EMA_SUPPORT BIT(3) + /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 @@ -2412,6 +3843,35 @@ enum ieee80211_sa_query_action { WLAN_ACTION_SA_QUERY_RESPONSE = 1, }; +/** + * struct ieee80211_bssid_index + * + * This structure refers to "Multiple BSSID-index element" + * + * @bssid_index: BSSID index + * @dtim_period: optional, overrides transmitted BSS dtim period + * @dtim_count: optional, overrides transmitted BSS dtim count + */ +struct ieee80211_bssid_index { + u8 bssid_index; + u8 dtim_period; + u8 dtim_count; +}; + +/** + * struct ieee80211_multiple_bssid_configuration + * + * This structure refers to "Multiple BSSID Configuration element" + * + * @bssid_count: total number of active BSSIDs in the set + * @profile_periodicity: the least number of beacon frames need to be received + * in order to discover all the nontransmitted BSSIDs in the set. + */ +struct ieee80211_multiple_bssid_configuration { + u8 bssid_count; + u8 profile_periodicity; +}; + #define SUITE(oui, id) (((oui) << 8) | (id)) /* cipher suite selectors */ @@ -2441,12 +3901,19 @@ enum ieee80211_sa_query_action { #define WLAN_AKM_SUITE_TDLS SUITE(0x000FAC, 7) #define WLAN_AKM_SUITE_SAE SUITE(0x000FAC, 8) #define WLAN_AKM_SUITE_FT_OVER_SAE SUITE(0x000FAC, 9) +#define WLAN_AKM_SUITE_AP_PEER_KEY SUITE(0x000FAC, 10) #define WLAN_AKM_SUITE_8021X_SUITE_B SUITE(0x000FAC, 11) #define WLAN_AKM_SUITE_8021X_SUITE_B_192 SUITE(0x000FAC, 12) +#define WLAN_AKM_SUITE_FT_8021X_SHA384 SUITE(0x000FAC, 13) #define WLAN_AKM_SUITE_FILS_SHA256 SUITE(0x000FAC, 14) #define WLAN_AKM_SUITE_FILS_SHA384 SUITE(0x000FAC, 15) #define WLAN_AKM_SUITE_FT_FILS_SHA256 SUITE(0x000FAC, 16) #define WLAN_AKM_SUITE_FT_FILS_SHA384 SUITE(0x000FAC, 17) +#define WLAN_AKM_SUITE_OWE SUITE(0x000FAC, 18) +#define WLAN_AKM_SUITE_FT_PSK_SHA384 SUITE(0x000FAC, 19) +#define WLAN_AKM_SUITE_PSK_SHA384 SUITE(0x000FAC, 20) + +#define WLAN_AKM_SUITE_WFA_DPP SUITE(WLAN_OUI_WFA, 2) #define WLAN_MAX_KEY_LEN 32 @@ -2458,6 +3925,7 @@ enum ieee80211_sa_query_action { #define WLAN_OUI_WFA 0x506f9a #define WLAN_OUI_TYPE_WFA_P2P 9 +#define WLAN_OUI_TYPE_WFA_DPP 0x1A #define WLAN_OUI_MICROSOFT 0x0050f2 #define WLAN_OUI_TYPE_MICROSOFT_WPA 1 #define WLAN_OUI_TYPE_MICROSOFT_WMM 2 @@ -2501,6 +3969,24 @@ struct ieee80211_tspec_ie { __le16 medium_time; } __packed; +struct ieee80211_he_6ghz_capa { + /* uses IEEE80211_HE_6GHZ_CAP_* below */ + __le16 capa; +} __packed; + +/* HE 6 GHz band capabilities */ +/* uses enum ieee80211_min_mpdu_spacing values */ +#define IEEE80211_HE_6GHZ_CAP_MIN_MPDU_START 0x0007 +/* uses enum ieee80211_vht_max_ampdu_length_exp values */ +#define IEEE80211_HE_6GHZ_CAP_MAX_AMPDU_LEN_EXP 0x0038 +/* uses IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_* values */ +#define IEEE80211_HE_6GHZ_CAP_MAX_MPDU_LEN 0x00c0 +/* WLAN_HT_CAP_SM_PS_* values */ +#define IEEE80211_HE_6GHZ_CAP_SM_PS 0x0600 +#define IEEE80211_HE_6GHZ_CAP_RD_RESPONDER 0x0800 +#define IEEE80211_HE_6GHZ_CAP_RX_ANTPAT_CONS 0x1000 +#define IEEE80211_HE_6GHZ_CAP_TX_ANTPAT_CONS 0x2000 + /** * ieee80211_get_qos_ctl - get pointer to qos control bytes * @hdr: the frame @@ -2518,6 +4004,17 @@ static inline u8 *ieee80211_get_qos_ctl(struct ieee80211_hdr *hdr) return (u8 *)hdr + 24; } +/** + * ieee80211_get_tid - get qos TID + * @hdr: the frame + */ +static inline u8 ieee80211_get_tid(struct ieee80211_hdr *hdr) +{ + u8 *qc = ieee80211_get_qos_ctl(hdr); + + return qc[0] & IEEE80211_QOS_CTL_TID_MASK; +} + /** * ieee80211_get_SA - get pointer to SA * @hdr: the frame @@ -2672,4 +4169,109 @@ static inline bool ieee80211_check_tim(const struct ieee80211_tim_ie *tim, #define TU_TO_JIFFIES(x) (usecs_to_jiffies((x) * 1024)) #define TU_TO_EXP_TIME(x) (jiffies + TU_TO_JIFFIES(x)) +struct element { + u8 id; + u8 datalen; + u8 data[]; +} __packed; + +/* element iteration helpers */ +#define for_each_element(_elem, _data, _datalen) \ + for (_elem = (const struct element *)(_data); \ + (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \ + (int)sizeof(*_elem) && \ + (const u8 *)(_data) + (_datalen) - (const u8 *)_elem >= \ + (int)sizeof(*_elem) + _elem->datalen; \ + _elem = (const struct element *)(_elem->data + _elem->datalen)) + +#define for_each_element_id(element, _id, data, datalen) \ + for_each_element(element, data, datalen) \ + if (element->id == (_id)) + +#define for_each_element_extid(element, extid, _data, _datalen) \ + for_each_element(element, _data, _datalen) \ + if (element->id == WLAN_EID_EXTENSION && \ + element->datalen > 0 && \ + element->data[0] == (extid)) + +#define for_each_subelement(sub, element) \ + for_each_element(sub, (element)->data, (element)->datalen) + +#define for_each_subelement_id(sub, id, element) \ + for_each_element_id(sub, id, (element)->data, (element)->datalen) + +#define for_each_subelement_extid(sub, extid, element) \ + for_each_element_extid(sub, extid, (element)->data, (element)->datalen) + +/* convert frequencies */ +#define MHZ_TO_KHZ(freq) ((freq) * 1000) +#define KHZ_TO_MHZ(freq) ((freq) / 1000) +#define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000 +#define KHZ_F "%d.%03d" + +/* convert powers */ +#define DBI_TO_MBI(gain) ((gain) * 100) +#define MBI_TO_DBI(gain) ((gain) / 100) +#define DBM_TO_MBM(gain) ((gain) * 100) +#define MBM_TO_DBM(gain) ((gain) / 100) + +/** + * for_each_element_completed - determine if element parsing consumed all data + * @element: element pointer after for_each_element() or friends + * @data: same data pointer as passed to for_each_element() or friends + * @datalen: same data length as passed to for_each_element() or friends + * + * This function returns %true if all the data was parsed or considered + * while walking the elements. Only use this if your for_each_element() + * loop cannot be broken out of, otherwise it always returns %false. + * + * If some data was malformed, this returns %false since the last parsed + * element will not fill the whole remaining data. + */ +static inline bool for_each_element_completed(const struct element *element, + const void *data, size_t datalen) +{ + return (const u8 *)element == (const u8 *)data + datalen; +} + +/** + * RSNX Capabilities: + * bits 0-3: Field length (n-1) + */ +#define WLAN_RSNX_CAPA_PROTECTED_TWT BIT(4) +#define WLAN_RSNX_CAPA_SAE_H2E BIT(5) + +/* + * reduced neighbor report, based on Draft P802.11ax_D6.1, + * section 9.4.2.170 and accepted contributions. + */ +#define IEEE80211_AP_INFO_TBTT_HDR_TYPE 0x03 +#define IEEE80211_AP_INFO_TBTT_HDR_FILTERED 0x04 +#define IEEE80211_AP_INFO_TBTT_HDR_COLOC 0x08 +#define IEEE80211_AP_INFO_TBTT_HDR_COUNT 0xF0 +#define IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM 9 +#define IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM 13 + +#define IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED 0x01 +#define IEEE80211_RNR_TBTT_PARAMS_SAME_SSID 0x02 +#define IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID 0x04 +#define IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID 0x08 +#define IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS 0x10 +#define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE 0x20 +#define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP 0x40 + +struct ieee80211_neighbor_ap_info { + u8 tbtt_info_hdr; + u8 tbtt_info_len; + u8 op_class; + u8 channel; +} __packed; + +enum ieee80211_range_params_max_total_ltf { + IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_4 = 0, + IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_8, + IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_16, + IEEE80211_RANGE_PARAMS_MAX_TOTAL_LTF_UNSPECIFIED, +}; + #endif /* __LINUX_IEEE80211_H */ diff --git a/carl9170fw/include/shared/fwcmd.h b/carl9170fw/include/shared/fwcmd.h index 2a58dd8..4a50009 100644 --- a/carl9170fw/include/shared/fwcmd.h +++ b/carl9170fw/include/shared/fwcmd.h @@ -127,7 +127,7 @@ struct carl9170_write_reg { struct carl9170_write_reg_byte { __le32 addr; __le32 count; - u8 val[0]; + u8 val[]; } __packed; #define CARL9170FW_PHY_HT_ENABLE 0x4 diff --git a/carl9170fw/include/shared/fwdesc.h b/carl9170fw/include/shared/fwdesc.h index da05a4e..10acb6a 100644 --- a/carl9170fw/include/shared/fwdesc.h +++ b/carl9170fw/include/shared/fwdesc.h @@ -1,22 +1,10 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ /* * Shared CARL9170 Header * * Firmware descriptor format * * Copyright 2009-2011 Christian Lamparter - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; see the file COPYING. If not, see - * http://www.gnu.org/licenses/. */ #ifndef __CARL9170_SHARED_FWDESC_H @@ -81,7 +69,7 @@ enum carl9170fw_feature_list { /* Firmware will pass BA when BARs are queued */ CARL9170FW_RX_BA_FILTER, - /* Firmware has support to write a byte at a time */ + /* Firmware has support to write a byte at a time */ CARL9170FW_HAS_WREGB_CMD, /* Pattern generator */ @@ -161,7 +149,7 @@ struct carl9170fw_fix_entry { struct carl9170fw_fix_desc { struct carl9170fw_desc_head head; - struct carl9170fw_fix_entry data[0]; + struct carl9170fw_fix_entry data[]; } __packed; #define CARL9170FW_FIX_DESC_SIZE \ (sizeof(struct carl9170fw_fix_desc)) diff --git a/carl9170fw/include/shared/hw.h b/carl9170fw/include/shared/hw.h index 08e0ae9..555ad49 100644 --- a/carl9170fw/include/shared/hw.h +++ b/carl9170fw/include/shared/hw.h @@ -851,7 +851,7 @@ struct ar9170_stream { __le16 length; __le16 tag; - u8 payload[0]; + u8 payload[]; } __packed __aligned(4); #define AR9170_STREAM_LEN 4 diff --git a/carl9170fw/include/shared/version.h b/carl9170fw/include/shared/version.h index 0fd08ab..79d2cd6 100644 --- a/carl9170fw/include/shared/version.h +++ b/carl9170fw/include/shared/version.h @@ -1,7 +1,7 @@ #ifndef __CARL9170_SHARED_VERSION_H #define __CARL9170_SHARED_VERSION_H -#define CARL9170FW_VERSION_YEAR 13 -#define CARL9170FW_VERSION_MONTH 10 -#define CARL9170FW_VERSION_DAY 25 +#define CARL9170FW_VERSION_YEAR 21 +#define CARL9170FW_VERSION_MONTH 2 +#define CARL9170FW_VERSION_DAY 5 #define CARL9170FW_VERSION_GIT "1.9.9" #endif /* __CARL9170_SHARED_VERSION_H */ diff --git a/carl9170fw/include/shared/wlan.h b/carl9170fw/include/shared/wlan.h index 117f005..78b0ee4 100644 --- a/carl9170fw/include/shared/wlan.h +++ b/carl9170fw/include/shared/wlan.h @@ -270,7 +270,7 @@ struct ar9170_tx_frame { struct ar9170_tx_hwdesc hdr; union { - struct ieee80211_hdr i3e; + struct ieee80211_hdr i3e __packed __aligned(2); u8 payload[0]; } data; } __packed __aligned(4); @@ -327,7 +327,7 @@ struct _carl9170_tx_superdesc { struct _carl9170_tx_superframe { struct _carl9170_tx_superdesc s; struct _ar9170_tx_hwdesc f; - u8 frame_data[0]; + u8 frame_data[]; } __packed __aligned(4); #define CARL9170_TX_SUPERDESC_LEN 24 @@ -367,24 +367,24 @@ struct ar9170_rx_macstatus { struct ar9170_rx_frame_single { struct ar9170_rx_head phy_head; - struct ieee80211_hdr i3e; + struct ieee80211_hdr i3e __packed __aligned(2); struct ar9170_rx_phystatus phy_tail; struct ar9170_rx_macstatus macstatus; -} __packed __aligned(4); +}; struct ar9170_rx_frame_head { struct ar9170_rx_head phy_head; - struct ieee80211_hdr i3e; + struct ieee80211_hdr i3e __packed __aligned(2); struct ar9170_rx_macstatus macstatus; -} __packed __aligned(4); +}; struct ar9170_rx_frame_middle { - struct ieee80211_hdr i3e; + struct ieee80211_hdr i3e __packed __aligned(2); struct ar9170_rx_macstatus macstatus; -} __packed __aligned(4); +}; struct ar9170_rx_frame_tail { - struct ieee80211_hdr i3e; + struct ieee80211_hdr i3e __packed __aligned(2); struct ar9170_rx_phystatus phy_tail; struct ar9170_rx_macstatus macstatus; } __packed __aligned(4); @@ -395,8 +395,8 @@ struct ar9170_rx_frame { struct ar9170_rx_frame_head head; struct ar9170_rx_frame_middle middle; struct ar9170_rx_frame_tail tail; - } __packed __aligned(4); -} __packed __aligned(4); + }; +}; static inline u8 ar9170_get_decrypt_type(struct ar9170_rx_macstatus *t) { diff --git a/carl9170fw/minifw/CMakeLists.txt b/carl9170fw/minifw/CMakeLists.txt index adf5e08..e34d29b 100644 --- a/carl9170fw/minifw/CMakeLists.txt +++ b/carl9170fw/minifw/CMakeLists.txt @@ -17,4 +17,5 @@ set_target_properties(miniboot.elf PROPERTIES LINK_FLAGS "-Tminiboot.lds") add_custom_target( miniboot.fw ALL ${OBJCOPY} --strip-unneeded -O binary -R .sram -R .eeprom -R .fwdsc miniboot.elf miniboot.fw - DEPENDS miniboot.elf) + DEPENDS miniboot.elf + BYPRODUCTS miniboot.fw) diff --git a/carl9170fw/toolchain/Makefile b/carl9170fw/toolchain/Makefile index 6f53563..fbcc8b9 100644 --- a/carl9170fw/toolchain/Makefile +++ b/carl9170fw/toolchain/Makefile @@ -1,24 +1,24 @@ -BINUTILS_VER=2.34 +BINUTILS_VER=2.38 BINUTILS_TAR=binutils-$(BINUTILS_VER).tar.xz BINUTILS_URL="http://ftpmirror.gnu.org/gnu/binutils/$(BINUTILS_TAR)" -NEWLIB_VER=3.3.0 +NEWLIB_VER=4.1.0 NEWLIB_TAR=newlib-$(NEWLIB_VER).tar.gz NEWLIB_URL="ftp://sourceware.org/pub/newlib/$(NEWLIB_TAR)" -GCC_VER=10.2.0 +GCC_VER=12.1.0 GCC_TAR=gcc-$(GCC_VER).tar.xz GCC_URL="http://ftpmirror.gnu.org/gnu/gcc/gcc-$(GCC_VER)/$(GCC_TAR)" -MPFR_VER=4.0.2 +MPFR_VER=4.1.0 MPFR_TAR=mpfr-$(MPFR_VER).tar.xz MPFR_URL="http://ftpmirror.gnu.org/gnu/mpfr/$(MPFR_TAR)" -GMP_VER=6.2.0 +GMP_VER=6.2.1 GMP_TAR=gmp-$(GMP_VER).tar.xz GMP_URL="http://ftpmirror.gnu.org/gnu/gmp/$(GMP_TAR)" -MPC_VER=1.1.0 +MPC_VER=1.2.1 MPC_TAR=mpc-$(MPC_VER).tar.gz MPC_URL="http://ftpmirror.gnu.org/gnu/mpc/$(MPC_TAR)" diff --git a/carl9170fw/toolchain/SHA256SUMS b/carl9170fw/toolchain/SHA256SUMS index 5fcebf4..2530a88 100644 --- a/carl9170fw/toolchain/SHA256SUMS +++ b/carl9170fw/toolchain/SHA256SUMS @@ -1,6 +1,8 @@ -6985c538143c1208dcb1ac42cedad6ff52e267b47e5f970183a3e75125b43c2e src/mpc-1.1.0.tar.gz -1d3be708604eae0e42d578ba93b390c2a145f17743a744d8f3f8c2ad5855a38a src/mpfr-4.0.2.tar.xz -f00b0e8803dc9bab1e2165bd568528135be734df3fabf8d0161828cd56028952 src/binutils-2.34.tar.xz -258e6cd51b3fbdfc185c716d55f82c08aff57df0c6fbd143cf6ed561267a1526 src/gmp-6.2.0.tar.xz -58dd9e3eaedf519360d92d84205c3deef0b3fc286685d1c562e245914ef72c66 src/newlib-3.3.0.tar.gz -b8dd4368bb9c7f0b98188317ee0254dd8cc99d1e3a18d0ff146c855fe16c1d8c src/gcc-10.2.0.tar.xz +fd4829912cddd12f84181c3451cc752be224643e87fac497b69edddadc49b4f2 src/gmp-6.2.1.tar.xz +17503d2c395dfcf106b622dc142683c1199431d095367c6aacba6eec30340459 src/mpc-1.2.1.tar.gz +0c98a3f1732ff6ca4ea690552079da9c597872d30e96ec28414ee23c95558a7f src/mpfr-4.1.0.tar.xz +f296e372f51324224d387cc116dc37a6bd397198756746f93a2b02e9a5d40154 src/newlib-4.1.0.tar.gz +820d9724f020a3e69cb337893a0b63c2db161dadcb0e06fc11dc29eb1e84a32c src/binutils-2.37.tar.xz +d08edc536b54c372a1010ff6619dd274c0f1603aa49212ba20f7aa2cda36fa8b src/gcc-11.2.0.tar.xz +e316477a914f567eccc34d5d29785b8b0f5a10208d36bbacedcc39048ecfe024 src/binutils-2.38.tar.xz +62fd634889f31c02b64af2c468f064b47ad1ca78411c45abe6ac4b5f8dd19c7b src/gcc-12.1.0.tar.xz