From: Javier Cardona Date: Sat, 31 Mar 2012 18:31:32 +0000 (-0700) Subject: mac80211: Implement mesh synchronization framework X-Git-Tag: 1.9.6~9 X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=b19f7afaf03733a84c9a152a9d59648baffce0e3;p=carl9170fw.git mac80211: Implement mesh synchronization framework This patch adds MBSS extensible synchronization framework (Sec. 13.13.2 of IEEE Std. 802.11-2012). The framework is implemented via an ops table which defines the following functions: rx_bcn_presp() - this is called every time a mesh beacon is received. adjust_tbtt() - this is called immediately before a beacon is about to be transmitted. The default neighbor offset synchronization defined in the standard is implemented. We also provide template functions for vendor specific methods. When neighbor offset synchronization is active (which is the default) mesh neighbors in the same MBSS will track timing offsets to each other and compensate clock drift. In our tests we observed that this mesh synchronization implementation successfully corrected drifts between stations of ~2PPM while introducing a jitter of ~20us. It is also possible to test this framework on mac80211_hwsim simulated phys to see how it behaves under different topologies, over poor links, etc. Signed-off-by: Marco Porsch Signed-off-by: Pavel Zubarev Signed-off-by: Javier Cardona Signed-off-by: John W. Linville Signed-off-by: Christian Lamparter --- diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h index 592b67a..b7de513 100644 --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h @@ -1468,6 +1468,18 @@ enum ieee80211_tdls_actioncode { /* TDLS specific payload type in the LLC/SNAP header */ #define WLAN_TDLS_SNAP_RFTYPE 0x2 +/** + * enum - mesh synchronization method identifier + * + * @IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET: the default synchronization method + * @IEEE80211_SYNC_METHOD_VENDOR: a vendor specific synchronization method + * that will be specified in a vendor specific information element + */ +enum { + IEEE80211_SYNC_METHOD_NEIGHBOR_OFFSET = 1, + IEEE80211_SYNC_METHOD_VENDOR = 255, +}; + /** * enum - mesh path selection protocol identifier *