From: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
Date: Wed, 13 Jun 2012 18:06:07 +0000 (+0800)
Subject: mac80211: implement the proactive PREQ generation
X-Git-Tag: 1.9.7~37
X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=9b75301418ea9b9ff86c9fa1b53c1a09bbce6c26;p=carl9170fw.git

mac80211: implement the proactive PREQ generation

Generate the proactive PREQ element as defined in
Sec. 13.10.9.3 (Case C) of IEEE Std. 802.11-2012
based on the selection of dot11MeshHWMPRootMode as follow:
dot11MeshHWMPRootMode (2) is proactivePREQnoPREP
dot11MeshHWMPRootMode (3) is proactivePREQwithPREP

The proactive PREQ is generated based on the interval
defined by dot11MeshHWMProotInterval.

With this change, proactive RANN element is now generated
if the dot11MeshHWMPRootMode is set to (4) instead of (1).

Signed-off-by: Chun-Yeow Yeoh <yeohchunyeow@gmail.com>
[line-break commit log]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 57058bd..34aca00 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -580,6 +580,26 @@ struct ieee80211s_hdr {
 #define MESH_FLAGS_AE		0x3
 #define MESH_FLAGS_PS_DEEP	0x4
 
+/**
+ * enum ieee80211_preq_flags - mesh PREQ element flags
+ *
+ * @IEEE80211_PREQ_PROACTIVE_PREP_FLAG: proactive PREP subfield
+ */
+enum ieee80211_preq_flags {
+	IEEE80211_PREQ_PROACTIVE_PREP_FLAG	= 1<<2,
+};
+
+/**
+ * enum ieee80211_preq_target_flags - mesh PREQ element per target flags
+ *
+ * @IEEE80211_PREQ_TO_FLAG: target only subfield
+ * @IEEE80211_PREQ_USN_FLAG: unknown target HWMP sequence number subfield
+ */
+enum ieee80211_preq_target_flags {
+	IEEE80211_PREQ_TO_FLAG	= 1<<0,
+	IEEE80211_PREQ_USN_FLAG	= 1<<2,
+};
+
 /**
  * struct ieee80211_quiet_ie
  *
@@ -1504,6 +1524,28 @@ enum {
 	IEEE80211_PATH_METRIC_VENDOR = 255,
 };
 
+/**
+ * enum ieee80211_root_mode_identifier - root mesh STA mode identifier
+ *
+ * These attribute are used by dot11MeshHWMPRootMode to set root mesh STA mode
+ *
+ * @IEEE80211_ROOTMODE_NO_ROOT: the mesh STA is not a root mesh STA (default)
+ * @IEEE80211_ROOTMODE_ROOT: the mesh STA is a root mesh STA if greater than
+ *	this value
+ * @IEEE80211_PROACTIVE_PREQ_NO_PREP: the mesh STA is a root mesh STA supports
+ *	the proactive PREQ with proactive PREP subfield set to 0
+ * @IEEE80211_PROACTIVE_PREQ_WITH_PREP: the mesh STA is a root mesh STA
+ *	supports the proactive PREQ with proactive PREP subfield set to 1
+ * @IEEE80211_PROACTIVE_RANN: the mesh STA is a root mesh STA supports
+ *	the proactive RANN
+ */
+enum ieee80211_root_mode_identifier {
+	IEEE80211_ROOTMODE_NO_ROOT = 0,
+	IEEE80211_ROOTMODE_ROOT = 1,
+	IEEE80211_PROACTIVE_PREQ_NO_PREP = 2,
+	IEEE80211_PROACTIVE_PREQ_WITH_PREP = 3,
+	IEEE80211_PROACTIVE_RANN = 4,
+};
 
 /*
  * IEEE 802.11-2007 7.3.2.9 Country information element