From: Oleksij Rempel Date: Sat, 28 Sep 2013 19:46:52 +0000 (+0200) Subject: hif/usb_api: remove dup code - ep6 fix X-Git-Tag: 1.4.0~10^2~2^2~7 X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=75734d969120c0f5c9b532913032d3f2e88583a9;p=open-ath9k-htc-firmware.git hif/usb_api: remove dup code - ep6 fix Signed-off-by: Oleksij Rempel --- diff --git a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c index e954539..2765e61 100755 --- a/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c +++ b/target_firmware/magpie_fw_dev/target/hif/k2_fw_usb_api.c @@ -402,111 +402,7 @@ void _fw_usb_reset_fifo(void) A_UART_HWINIT((22*1000*1000), 19200); } -/* - * -- usb1.1 ep6 fix -- - */ -extern uint16_t u8UsbConfigValue; -extern uint16_t u8UsbInterfaceValue; -extern uint16_t u8UsbInterfaceAlternateSetting; extern SetupPacket ControlCmd; -extern void vUsbClrEPx(void); - -void vUSBFIFO_EP6Cfg_FS_patch(void) -{ -#if (FS_C1_I0_A0_EP_NUMBER >= 6) - int i; - - //EP0X06 - mUsbEPMap(EP6, FS_C1_I0_A0_EP6_MAP); - mUsbFIFOMap(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_MAP); - mUsbFIFOConfig(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_CONFIG); - - for(i = FS_C1_I0_A0_EP6_FIFO_START + 1 ; - i < FS_C1_I0_A0_EP6_FIFO_START + FS_C1_I0_A0_EP6_FIFO_NO ; i ++) - { - mUsbFIFOConfig(i, (FS_C1_I0_A0_EP6_FIFO_CONFIG & (~BIT7)) ); - } - - mUsbEPMxPtSzHigh(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); - mUsbEPMxPtSzLow(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); - mUsbEPinHighBandSet(EP6 , FS_C1_I0_A0_EP6_DIRECTION, FS_C1_I0_A0_EP6_MAX_PACKET); -#endif -} - -void vUsbFIFO_EPxCfg_FS_patch(void) -{ - switch (u8UsbConfigValue) - { - #if (FS_CONFIGURATION_NUMBER >= 1) - // Configuration 0X01 - case 0X01: - switch (u8UsbInterfaceValue) - { - #if (FS_C1_INTERFACE_NUMBER >= 1) - // Interface 0 - case 0: - switch (u8UsbInterfaceAlternateSetting) - { - - #if (FS_C1_I0_ALT_NUMBER >= 1) - // AlternateSetting 0 - case 0: - - // snapped.... - - // patch up this ep6_fs config - vUSBFIFO_EP6Cfg_FS_patch(); - - break; - - #endif - default: - break; - } - break; - #endif - default: - break; - } - break; - #endif - default: - break; - } - //mCHECK_STACK(); -} - - -BOOLEAN bSet_configuration_patch(void) -{ - //A_PRINTF("bSet_configuration...\n\r"); - - bSet_configuration(); - - if (mLOW_BYTE(mDEV_REQ_VALUE()) == 0) - { - // snapped.... - ; - } - else - { - if (mUsbHighSpeedST()) // First judge HS or FS?? - { - // snapped.... - ; - } - else - { - // snapped.... - vUsbFIFO_EPxCfg_FS_patch(); - } - - // snapped.... - } - - eUsbCxFinishAction = ACT_DONE; - return TRUE; -} extern uint16_t *u8UsbDeviceDescriptor; extern uint16_t *u8ConfigDescriptorEX; @@ -567,35 +463,6 @@ BOOLEAN bGet_descriptor_patch(void) return TRUE; } -extern BOOLEAN bStandardCommand(void); - -BOOLEAN bStandardCommand_patch(void) -{ - if (mDEV_REQ_REQ() == USB_SET_CONFIGURATION) { - A_USB_SET_CONFIG(); - -#if ENABLE_SWAP_DATA_MODE - // SWAP FUNCTION should be enabled while DMA engine is not working, - // the best place to enable it is before we trigger the DMA - MAGPIE_REG_USB_RX0_SWAP_DATA = 0x1; - MAGPIE_REG_USB_TX0_SWAP_DATA = 0x1; - - #if SYSTEM_MODULE_HP_EP5 - MAGPIE_REG_USB_RX1_SWAP_DATA = 0x1; - #endif - - #if SYSTEM_MODULE_HP_EP6 - MAGPIE_REG_USB_RX2_SWAP_DATA = 0x1; - #endif - -#endif //ENABLE_SWAP_DATA_MODE - return TRUE; - } - else { - return bStandardCommand(); - } -} - #endif diff --git a/target_firmware/magpie_fw_dev/target/hif/usb_api_main_patch.c b/target_firmware/magpie_fw_dev/target/hif/usb_api_main_patch.c index 10a1123..f6be408 100644 --- a/target_firmware/magpie_fw_dev/target/hif/usb_api_main_patch.c +++ b/target_firmware/magpie_fw_dev/target/hif/usb_api_main_patch.c @@ -14,6 +14,7 @@ #define USB_EP3_MAX_PKT_SIZE bUSB_EP_MAX_PKT_SIZE_64 extern USB_FIFO_CONFIG usbFifoConf; +extern Action eUsbCxFinishAction; void cold_reboot(void) { @@ -199,3 +200,150 @@ done: ; } +/* + * usb1.1 ep6 fix + * TODO: + * - theoretically ep6 configured same way as ep1 + * so, if there are some problems we should have it + * there too. + * - do we really need support usb1.1? + */ +extern uint16_t u8UsbConfigValue; +extern uint16_t u8UsbInterfaceValue; +extern uint16_t u8UsbInterfaceAlternateSetting; +extern SetupPacket ControlCmd; +extern void vUsbClrEPx(void); + +#undef FS_C1_I0_A0_EP_NUMBER +#define FS_C1_I0_A0_EP_NUMBER 6 + +#define FS_C1_I0_A0_EP6_BLKSIZE BLK512BYTE +#define FS_C1_I0_A0_EP6_BLKNO DOUBLE_BLK +#define FS_C1_I0_A0_EP6_DIRECTION DIRECTION_OUT +#define FS_C1_I0_A0_EP6_TYPE TF_TYPE_BULK +#define FS_C1_I0_A0_EP6_MAX_PACKET 0x0040 +#define FS_C1_I0_A0_EP6_bInterval 0 + +/* EP6 */ +#define FS_C1_I0_A0_EP6_FIFO_START \ + (FS_C1_I0_A0_EP5_FIFO_START + FS_C1_I0_A0_EP5_FIFO_NO) +#define FS_C1_I0_A0_EP6_FIFO_NO \ + (FS_C1_I0_A0_EP6_BLKNO * FS_C1_I0_A0_EP6_BLKSIZE) +#define FS_C1_I0_A0_EP6_FIFO_CONFIG \ + (0x80 | ((FS_C1_I0_A0_EP6_BLKSIZE - 1) << 4) | \ + ((FS_C1_I0_A0_EP6_BLKNO - 1) << 2) | FS_C1_I0_A0_EP6_TYPE) +#define FS_C1_I0_A0_EP6_FIFO_MAP \ + (((1 - FS_C1_I0_A0_EP6_DIRECTION) << 4) | EP6) +#define FS_C1_I0_A0_EP6_MAP \ + (FS_C1_I0_A0_EP6_FIFO_START | (FS_C1_I0_A0_EP6_FIFO_START << 4) | \ + (MASK_F0 >> (4*FS_C1_I0_A0_EP6_DIRECTION))) + +void vUSBFIFO_EP6Cfg_FS_patch(void) +{ +#if (FS_C1_I0_A0_EP_NUMBER >= 6) + int i; + + /* EP0X06 */ + mUsbEPMap(EP6, FS_C1_I0_A0_EP6_MAP); + mUsbFIFOMap(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_MAP); + mUsbFIFOConfig(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_CONFIG); + + for(i = FS_C1_I0_A0_EP6_FIFO_START + 1 ; + i < FS_C1_I0_A0_EP6_FIFO_START + FS_C1_I0_A0_EP6_FIFO_NO ; i ++) + { + mUsbFIFOConfig(i, (FS_C1_I0_A0_EP6_FIFO_CONFIG & (~BIT7)) ); + } + + mUsbEPMxPtSzHigh(EP6, FS_C1_I0_A0_EP6_DIRECTION, + (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); + mUsbEPMxPtSzLow(EP6, FS_C1_I0_A0_EP6_DIRECTION, + (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); + mUsbEPinHighBandSet(EP6, FS_C1_I0_A0_EP6_DIRECTION, + FS_C1_I0_A0_EP6_MAX_PACKET); +#endif +} + +void vUsbFIFO_EPxCfg_FS_patch(void) +{ + switch (u8UsbConfigValue) + { +#if (FS_CONFIGURATION_NUMBER >= 1) + /* Configuration 0X01 */ + case 0X01: + switch (u8UsbInterfaceValue) + { +#if (FS_C1_INTERFACE_NUMBER >= 1) + /* Interface 0 */ + case 0: + switch (u8UsbInterfaceAlternateSetting) + { + +#if (FS_C1_I0_ALT_NUMBER >= 1) + /* AlternateSetting 0 */ + case 0: + + /* snapped.... */ + + /* patch up this ep6_fs config */ + vUSBFIFO_EP6Cfg_FS_patch(); + + break; + +#endif + default: + break; + } + break; +#endif + default: + break; + } + break; +#endif + default: + break; + } + /* mCHECK_STACK(); */ +} + +BOOLEAN bSet_configuration_patch(void) +{ + /* do some defaul configuration */ + bSet_configuration(); + + /* overwrite defaul FIFO configuration for FullSpeed USB */ + if ((mLOW_BYTE(mDEV_REQ_VALUE()) != 0) && !mUsbHighSpeedST()) + vUsbFIFO_EPxCfg_FS_patch(); + + eUsbCxFinishAction = ACT_DONE; + return TRUE; +} + +extern BOOLEAN bStandardCommand(void); + +BOOLEAN bStandardCommand_patch(void) +{ + if (mDEV_REQ_REQ() == USB_SET_CONFIGURATION) { + A_USB_SET_CONFIG(); + +#if ENABLE_SWAP_DATA_MODE + /* SWAP FUNCTION should be enabled while DMA engine + * is not working, the best place to enable it + * is before we trigger the DMA */ + MAGPIE_REG_USB_RX0_SWAP_DATA = 0x1; + MAGPIE_REG_USB_TX0_SWAP_DATA = 0x1; + +#if SYSTEM_MODULE_HP_EP5 + MAGPIE_REG_USB_RX1_SWAP_DATA = 0x1; +#endif + +#if SYSTEM_MODULE_HP_EP6 + MAGPIE_REG_USB_RX2_SWAP_DATA = 0x1; +#endif + +#endif /* ENABLE_SWAP_DATA_MODE */ + return TRUE; + } else + return bStandardCommand(); +} + diff --git a/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c b/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c index d019640..b95fce7 100755 --- a/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c +++ b/target_firmware/magpie_fw_dev/target/rompatch/usb_api_patch.c @@ -118,134 +118,6 @@ void _fw_usbfifo_init(USB_FIFO_CONFIG *pConfig) usbFifoConf.send_event_done = pConfig->send_event_done; } -/* - * -- usb1.1 ep6 fix -- - */ -extern uint16_t u8UsbConfigValue; -extern uint16_t u8UsbInterfaceValue; -extern uint16_t u8UsbInterfaceAlternateSetting; -extern SetupPacket ControlCmd; -extern void vUsbClrEPx(void); - -#undef FS_C1_I0_A0_EP_NUMBER -#define FS_C1_I0_A0_EP_NUMBER 6 - -#define FS_C1_I0_A0_EP6_BLKSIZE BLK512BYTE -#define FS_C1_I0_A0_EP6_BLKNO DOUBLE_BLK -#define FS_C1_I0_A0_EP6_DIRECTION DIRECTION_OUT -#define FS_C1_I0_A0_EP6_TYPE TF_TYPE_BULK -#define FS_C1_I0_A0_EP6_MAX_PACKET 0x0040 -#define FS_C1_I0_A0_EP6_bInterval 00 - -// EP6 -#define FS_C1_I0_A0_EP6_FIFO_START (FS_C1_I0_A0_EP5_FIFO_START + FS_C1_I0_A0_EP5_FIFO_NO) -#define FS_C1_I0_A0_EP6_FIFO_NO (FS_C1_I0_A0_EP6_BLKNO * FS_C1_I0_A0_EP6_BLKSIZE) -#define FS_C1_I0_A0_EP6_FIFO_CONFIG (0x80 | ((FS_C1_I0_A0_EP6_BLKSIZE - 1) << 4) | ((FS_C1_I0_A0_EP6_BLKNO - 1) << 2) | FS_C1_I0_A0_EP6_TYPE) -#define FS_C1_I0_A0_EP6_FIFO_MAP (((1 - FS_C1_I0_A0_EP6_DIRECTION) << 4) | EP6) -#define FS_C1_I0_A0_EP6_MAP (FS_C1_I0_A0_EP6_FIFO_START | (FS_C1_I0_A0_EP6_FIFO_START << 4) | (MASK_F0 >> (4*FS_C1_I0_A0_EP6_DIRECTION))) - - -#define CMD_PCI_RC_RESET_ON() HAL_WORD_REG_WRITE(MAGPIE_REG_RST_RESET_ADDR, \ - (HAL_WORD_REG_READ(MAGPIE_REG_RST_RESET_ADDR)| \ - (PCI_RC_PHY_SHIFT_RESET_BIT|PCI_RC_PLL_RESET_BIT|PCI_RC_PHY_RESET_BIT|PCI_RC_RESET_BIT))) - -void vUSBFIFO_EP6Cfg_FS_patch(void) -{ -#if (FS_C1_I0_A0_EP_NUMBER >= 6) - int i; - - //EP0X06 - mUsbEPMap(EP6, FS_C1_I0_A0_EP6_MAP); - mUsbFIFOMap(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_MAP); - mUsbFIFOConfig(FS_C1_I0_A0_EP6_FIFO_START, FS_C1_I0_A0_EP6_FIFO_CONFIG); - - for(i = FS_C1_I0_A0_EP6_FIFO_START + 1 ; - i < FS_C1_I0_A0_EP6_FIFO_START + FS_C1_I0_A0_EP6_FIFO_NO ; i ++) - { - mUsbFIFOConfig(i, (FS_C1_I0_A0_EP6_FIFO_CONFIG & (~BIT7)) ); - } - - mUsbEPMxPtSzHigh(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); - mUsbEPMxPtSzLow(EP6, FS_C1_I0_A0_EP6_DIRECTION, (FS_C1_I0_A0_EP6_MAX_PACKET & 0x7ff)); - mUsbEPinHighBandSet(EP6 , FS_C1_I0_A0_EP6_DIRECTION, FS_C1_I0_A0_EP6_MAX_PACKET); -#endif -} - -void vUsbFIFO_EPxCfg_FS_patch(void) -{ - switch (u8UsbConfigValue) - { -#if (FS_CONFIGURATION_NUMBER >= 1) - // Configuration 0X01 - case 0X01: - switch (u8UsbInterfaceValue) - { -#if (FS_C1_INTERFACE_NUMBER >= 1) - // Interface 0 - case 0: - switch (u8UsbInterfaceAlternateSetting) - { - -#if (FS_C1_I0_ALT_NUMBER >= 1) - // AlternateSetting 0 - case 0: - - // snapped.... - - // patch up this ep6_fs config - vUSBFIFO_EP6Cfg_FS_patch(); - - break; - -#endif - default: - break; - } - break; -#endif - default: - break; - } - break; -#endif - default: - break; - } - //mCHECK_STACK(); -} - - -BOOLEAN bSet_configuration_patch(void) -{ - bSet_configuration(); - - if (mLOW_BYTE(mDEV_REQ_VALUE()) == 0) - { - // snapped.... - ; - } - else - { - if (mUsbHighSpeedST()) // First judge HS or FS?? - { - // snapped.... - ; - } - else - { - // snapped.... - vUsbFIFO_EPxCfg_FS_patch(); - } - - // snapped.... - } - - eUsbCxFinishAction = ACT_DONE; - return TRUE; -} - - - #define PCI_RC_RESET_BIT BIT6 #define PCI_RC_PHY_RESET_BIT BIT7 #define PCI_RC_PLL_RESET_BIT BIT8 @@ -545,6 +417,10 @@ static void _fw_power_on() (HAL_WORD_REG_READ(MAGPIE_REG_ETH_PLL_BYPASS_ADDR)&(~(BIT4|BIT0)))); } +#define CMD_PCI_RC_RESET_ON() HAL_WORD_REG_WRITE(MAGPIE_REG_RST_RESET_ADDR, \ + (HAL_WORD_REG_READ(MAGPIE_REG_RST_RESET_ADDR)| \ + (PCI_RC_PHY_SHIFT_RESET_BIT|PCI_RC_PLL_RESET_BIT|PCI_RC_PHY_RESET_BIT|PCI_RC_RESET_BIT))) + static void _fw_restore_dma_fifo(void) { HAL_WORD_REG_WRITE(0x5601C, (HAL_WORD_REG_READ(0x5601C)&(~(BIT18)))); @@ -568,6 +444,7 @@ static void _fw_restore_dma_fifo(void) extern uint16_t *u8ConfigDescriptorEX; extern uint16_t *pu8DescriptorEX; extern uint16_t u16TxRxCounter; +extern SetupPacket ControlCmd; extern uint16_t *u8UsbDeviceDescriptor; @@ -674,31 +551,3 @@ BOOLEAN bGet_descriptor_patch(void) } } -extern BOOLEAN bStandardCommand(void); - -BOOLEAN bStandardCommand_patch(void) -{ - if (mDEV_REQ_REQ() == USB_SET_CONFIGURATION) { - A_USB_SET_CONFIG(); - -#if ENABLE_SWAP_DATA_MODE - // SWAP FUNCTION should be enabled while DMA engine is not working, - // the best place to enable it is before we trigger the DMA - MAGPIE_REG_USB_RX0_SWAP_DATA = 0x1; - MAGPIE_REG_USB_TX0_SWAP_DATA = 0x1; - -#if SYSTEM_MODULE_HP_EP5 - MAGPIE_REG_USB_RX1_SWAP_DATA = 0x1; -#endif - -#if SYSTEM_MODULE_HP_EP6 - MAGPIE_REG_USB_RX2_SWAP_DATA = 0x1; -#endif - -#endif //ENABLE_SWAP_DATA_MODE - return TRUE; - } - else { - return bStandardCommand(); - } -}