From: Oleksij Rempel Date: Sun, 27 Apr 2014 13:27:26 +0000 (+0200) Subject: usb_api_k2_patch.c: use new io functions X-Git-Tag: 1.4.0~6^2~5 X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=55c815f8e7875958d6b8e5863aea6d5aa871d884;p=open-ath9k-htc-firmware.git usb_api_k2_patch.c: use new io functions Signed-off-by: Oleksij Rempel --- diff --git a/target_firmware/magpie_fw_dev/target/hif/usb_api_k2_patch.c b/target_firmware/magpie_fw_dev/target/hif/usb_api_k2_patch.c index 62c3a51..0d9ca35 100755 --- a/target_firmware/magpie_fw_dev/target/hif/usb_api_k2_patch.c +++ b/target_firmware/magpie_fw_dev/target/hif/usb_api_k2_patch.c @@ -41,6 +41,7 @@ #include "athos_api.h" #include "usbfifo_api.h" +#include "adf_os_io.h" #include "sys_cfg.h" @@ -52,26 +53,6 @@ extern BOOLEAN UsbChirpFinish; extern USB_FIFO_CONFIG usbFifoConf; #if SYSTEM_MODULE_USB -#define vUsb_ep0end(void) \ -{ \ - eUsbCxCommand = CMD_VOID; \ - USB_BYTE_REG_WRITE(ZM_CX_CONFIG_STATUS_OFFSET, 0x01); \ -} - -#define vUsb_ep0fail(void) USB_BYTE_REG_WRITE(ZM_CX_CONFIG_STATUS_OFFSET, 0x04) - -#define vUsb_rst() \ -{ \ - USB_BYTE_REG_WRITE(ZM_INTR_SOURCE_7_OFFSET, \ - (USB_BYTE_REG_READ(ZM_INTR_SOURCE_7_OFFSET)&~BIT1)); \ - UsbChirpFinish = FALSE; \ -} - -#define vUsb_suspend() USB_BYTE_REG_WRITE(ZM_INTR_SOURCE_7_OFFSET, \ - (USB_BYTE_REG_READ(ZM_INTR_SOURCE_7_OFFSET)&~BIT2)) - -#define vUsb_resm() USB_BYTE_REG_WRITE(ZM_INTR_SOURCE_7_OFFSET, \ - (USB_BYTE_REG_READ(ZM_INTR_SOURCE_7_OFFSET)&~BIT3)) #define CHECK_SOF_LOOP_CNT 50 @@ -82,14 +63,14 @@ void _fw_usb_suspend_reboot() volatile uint32_t t = 0; volatile uint32_t sof_no=0,sof_no_new=0; /* Set GO_TO_SUSPEND bit to USB main control register */ - vUsb_suspend(); + io8_clr_usb(ZM_INTR_SOURCE_7_OFFSET, BIT2); A_PRINTF("!USB suspend\n\r"); /* keep the record of suspend */ #if defined(PROJECT_MAGPIE) - *((volatile uint32_t*)WATCH_DOG_MAGIC_PATTERN_ADDR) = SUS_MAGIC_PATTERN; + iowrite32(WATCH_DOG_MAGIC_PATTERN_ADDR, SUS_MAGIC_PATTERN); #elif defined(PROJECT_K2) - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_STATUS_ADDR, SUS_MAGIC_PATTERN); + iowrite32(MAGPIE_REG_RST_STATUS_ADDR, SUS_MAGIC_PATTERN); #endif /* #if defined(PROJECT_MAGPIE) */ /* Reset USB FIFO */ @@ -100,36 +81,35 @@ void _fw_usb_suspend_reboot() DEBUG_SYSTEM_STATE = (DEBUG_SYSTEM_STATE&(~0xffff)) | 0x1000; +#if 0 /* reset ep3/ep4 fifo in case there * is data which might affect resuming */ -// HAL_BYTE_REG_WRITE(0x100ae, (HAL_BYTE_REG_READ(0x100ae)|0x10)); -// HAL_BYTE_REG_WRITE(0x100ae, (HAL_BYTE_REG_READ(0x100af)|0x10)); - - { - /* config gpio to input before goto suspend */ + iowrite8(0x100ae, ioread8(0x100ae) | 0x10); + iowrite8(0x100ae, ioread8(0x100af) | 0x10); - /* disable JTAG/ICE */ - //jtag = HAL_WORD_REG_READ(0x10004054); - //HAL_WORD_REG_WRITE(0x10004054, (jtag|BIT17)); + /* config gpio to input before goto suspend */ - /* disable SPI */ - //spi = HAL_WORD_REG_READ(0x50040); - //HAL_WORD_REG_WRITE(0x50040, (spi&~(BIT8))); + /* disable JTAG/ICE */ + jtag = ioread32(0x10004054); + iowrite32(0x10004054, jtag | BIT17); - /* set all GPIO to input */ - gpio_in = HAL_WORD_REG_READ(0x1000404c); - HAL_WORD_REG_WRITE(0x1000404c, 0x0); + /* disable SPI */ + spi = ioread32(0x50040); + iowrite32(0x50040, spi & ~BIT8); +#endif + /* set all GPIO to input */ + gpio_in = ioread32(0x1000404c); + iowrite32(0x1000404c, 0x0); - /* set PU/PD for all GPIO except two UART pins */ - pupd = HAL_WORD_REG_READ(0x10004088); - HAL_WORD_REG_WRITE(0x10004088, 0xA982AA6A); - } + /* set PU/PD for all GPIO except two UART pins */ + pupd = ioread32(0x10004088); + iowrite32(0x10004088, 0xA982AA6A); - sof_no= HAL_WORD_REG_READ(0x10004); + sof_no = ioread32(0x10004); for (t = 0; t < CHECK_SOF_LOOP_CNT; t++) { A_DELAY_USECS(1000); /* delay 1ms */ - sof_no_new = HAL_WORD_REG_READ(0x10004); + sof_no_new = ioread32(0x10004); if(sof_no_new == sof_no) break; @@ -148,19 +128,20 @@ void _fw_usb_suspend_reboot() * setting the go suspend here, power down right away!!! */ if (t != CHECK_SOF_LOOP_CNT) /* not time out */ - HAL_WORD_REG_WRITE(0x10000, HAL_WORD_REG_READ(0x10000)|(0x8)); + io32_set(0x10000, BIT3); DEBUG_SYSTEM_STATE = (DEBUG_SYSTEM_STATE&(~0xffff)) | 0x1100; #if 0 /* pll unstable, h/w bug? */ - HAL_WORD_REG_WRITE(0x50040, (0x300|6|(1>>1)<<12)); + iowrite32(0x50040, 0x300 | 6 | (1>>1) << 12); A_UART_HWINIT((40*1000*1000)/1, 19200); -#endif + /* restore gpio setting */ - //HAL_WORD_REG_WRITE(0x10004054, jtag); - //HAL_WORD_REG_WRITE(0x50040, spi); - HAL_WORD_REG_WRITE(0x1000404c, gpio_in); - HAL_WORD_REG_WRITE(0x10004088, pupd); + iowrite32(0x10004054, jtag); + iowrite32(0x50040, spi); +#endif + iowrite32(0x1000404c, gpio_in); + iowrite32(0x10004088, pupd); DEBUG_SYSTEM_STATE = (DEBUG_SYSTEM_STATE&(~0xffff)) | 0x1200; @@ -168,13 +149,11 @@ void _fw_usb_suspend_reboot() * so that reset mac can't be done in ResetFifo function, * move to here... whole mac control reset.... (bit1) */ - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, (BIT1)); - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, - (HAL_WORD_REG_READ(MAGPIE_REG_RST_PWDN_CTRL_ADDR)|BIT0)); - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0x0); + iowrite32(MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT1); + io32_set(MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT0); + iowrite32(MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0); A_DELAY_USECS(1000); - //A_PRINTF("reg(0x10020)=(%x)\n", HAL_WORD_REG_READ(0x10020)); /* disable ep3 int enable, so that resume back won't * send wdt magic pattern out!!! */ mUSB_STATUS_IN_INT_DISABLE(); @@ -186,7 +165,7 @@ void _fw_usb_suspend_reboot() if (((DEBUG_SYSTEM_STATE&~(0x0000ffff))>>16 == 0x5342)) { /* UART_SEL and SPI_SEL */ - HAL_WORD_REG_WRITE(0x50040, (0x300|0|(1>>1)<<12)); + iowrite32(0x50040, 0x300 | 0 | (1 >> 1) << 12); } /* Jump to boot code */ @@ -204,7 +183,7 @@ void _fw_usb_fw_task(void) register uint8_t usb_interrupt_level1; register uint8_t usb_interrupt_level2; - usb_interrupt_level1 = USB_BYTE_REG_READ(ZM_INTR_GROUP_OFFSET); + usb_interrupt_level1 = ioread8_usb(ZM_INTR_GROUP_OFFSET); #if 0 /* these endpoints are handled by DMA */ if (usb_interrupt_level1 & BIT5) { @@ -213,7 +192,7 @@ void _fw_usb_fw_task(void) #endif if (usb_interrupt_level1 & BIT4) { usb_interrupt_level2 = - USB_BYTE_REG_READ(ZM_INTR_SOURCE_4_OFFSET); + ioread8_usb(ZM_INTR_SOURCE_4_OFFSET); if(usb_interrupt_level2 & BIT6) A_USB_REG_OUT(); /* vUsb_Reg_Out() */ @@ -222,23 +201,21 @@ void _fw_usb_fw_task(void) if (usb_interrupt_level1 & BIT6) { /* zfGenWatchDogEvent(); ?? */ usb_interrupt_level2 = - USB_BYTE_REG_READ(ZM_INTR_SOURCE_6_OFFSET); + ioread8_usb(ZM_INTR_SOURCE_6_OFFSET); if(usb_interrupt_level2 & BIT6) A_USB_STATUS_IN(); /* vUsb_Status_In() */ } if (usb_interrupt_level1 & BIT0) { usb_interrupt_level2 = - USB_BYTE_REG_READ(ZM_INTR_SOURCE_0_OFFSET); + ioread8_usb(ZM_INTR_SOURCE_0_OFFSET); /* refer to FUSB200, p 48, offset:21H, bit7 description, * should clear the command abort interrupt first!? */ if (usb_interrupt_level2 & BIT7) { /* Handle command abort */ - USB_BYTE_REG_WRITE(ZM_INTR_SOURCE_0_OFFSET, - (USB_BYTE_REG_READ(ZM_INTR_SOURCE_0_OFFSET) - & ~BIT7)); + io8_clr_usb(ZM_INTR_SOURCE_0_OFFSET, BIT7); A_PRINTF("![SOURCE_0] bit7 on\n\r"); } @@ -253,27 +230,31 @@ void _fw_usb_fw_task(void) /* vWriteUSBFakeData() */ } - if (usb_interrupt_level2 & BIT3) - vUsb_ep0end(); + if (usb_interrupt_level2 & BIT3) { + /* vUsb_ep0end */ + eUsbCxCommand = CMD_VOID; + iowrite8_usb(ZM_CX_CONFIG_STATUS_OFFSET, 0x01); + } + /* EP0 fail */ if (usb_interrupt_level2 & BIT4) - vUsb_ep0fail(); + iowrite8_usb(ZM_CX_CONFIG_STATUS_OFFSET, 0x04); if (eUsbCxFinishAction == ACT_STALL) { /* set CX_STL to stall Endpoint0 & * will also clear FIFO0 */ - USB_BYTE_REG_WRITE(ZM_CX_CONFIG_STATUS_OFFSET, 0x04); + iowrite8_usb(ZM_CX_CONFIG_STATUS_OFFSET, 0x04); } else if (eUsbCxFinishAction == ACT_DONE) { /* set CX_DONE to indicate the transmistion * of control frame */ - USB_BYTE_REG_WRITE(ZM_CX_CONFIG_STATUS_OFFSET, 0x01); + iowrite8_usb(ZM_CX_CONFIG_STATUS_OFFSET, 0x01); } eUsbCxFinishAction = ACT_IDLE; } if (usb_interrupt_level1 & BIT7) { usb_interrupt_level2 = - USB_BYTE_REG_READ(ZM_INTR_SOURCE_7_OFFSET); + ioread8_usb(ZM_INTR_SOURCE_7_OFFSET); #if 0 if (usb_interrupt_level2 & BIT7) @@ -284,9 +265,9 @@ void _fw_usb_fw_task(void) #endif if (usb_interrupt_level2 & BIT1) { - vUsb_rst(); + io8_clr_usb(ZM_INTR_SOURCE_7_OFFSET, BIT1); + UsbChirpFinish = FALSE; A_PRINTF("!USB reset\n\r"); -// A_PRINTF("![0x1012c]: %\n\r", USB_WORD_REG_READ(0x12c)); } if (usb_interrupt_level2 & BIT2) { /* TBD: the suspend resume code should put here, @@ -296,7 +277,7 @@ void _fw_usb_fw_task(void) _fw_usb_suspend_reboot(); } if (usb_interrupt_level2 & BIT3) { - vUsb_resm(); + io8_clr_usb(ZM_INTR_SOURCE_7_OFFSET, BIT3); A_PRINTF("!USB resume\n\r"); } } @@ -305,10 +286,8 @@ void _fw_usb_fw_task(void) void _fw_usb_reset_fifo(void) { - volatile uint32_t *reg_data; - - HAL_BYTE_REG_WRITE(0x100ae, (HAL_BYTE_REG_READ(0x100ae)|0x10)); - HAL_BYTE_REG_WRITE(0x100af, (HAL_BYTE_REG_READ(0x100af)|0x10)); + io8_set(0x100ae, 0x10); + io8_set(0x100af, 0x10); /* disable ep3 int enable, so that resume back won't * send wdt magic pattern out!!! @@ -319,28 +298,27 @@ void _fw_usb_reset_fifo(void) * k2: MAGPIE_REG_RST_WDT_TIMER_CTRL_ADDR * magpie: MAGPIE_REG_RST_STATUS_ADDR */ - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_STATUS_ADDR, SUS_MAGIC_PATTERN); + iowrite32(MAGPIE_REG_RST_STATUS_ADDR, SUS_MAGIC_PATTERN); /* * Before USB suspend, USB DMA must be reset(refer to Otus) * Otus runs the following statements only - * HAL_WORD_REG_WRITE( MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT0|BIT2 ); - * HAL_WORD_REG_WRITE( MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0x0 ); + * iowrite32( MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT0|BIT2 ); + * iowrite32( MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0x0 ); * K2 must run the following statements additionally * reg_data = (A_UINT32 *)(USB_CTRL_BASE_ADDRESS + 0x118); * *reg_data = 0x00000000; * *reg_data = 0x00000001; * because of Hardware bug in K2 */ - USB_WORD_REG_WRITE(ZM_SOC_USB_DMA_RESET_OFFSET, 0x0); + iowrite32_usb(ZM_SOC_USB_DMA_RESET_OFFSET, 0x0); /* reset both usb(bit2)/wlan(bit1) dma */ - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, (BIT2)); - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, - (HAL_WORD_REG_READ(MAGPIE_REG_RST_PWDN_CTRL_ADDR)|BIT0)); - HAL_WORD_REG_WRITE(MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0x0); + iowrite32(MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT2); + io32_set(MAGPIE_REG_RST_PWDN_CTRL_ADDR, BIT0); + iowrite32(MAGPIE_REG_RST_PWDN_CTRL_ADDR, 0x0); - USB_WORD_REG_WRITE(ZM_SOC_USB_DMA_RESET_OFFSET, BIT0); + iowrite32_usb(ZM_SOC_USB_DMA_RESET_OFFSET, BIT0); /* MAC warem reset */ //reg_data = (uint32_t *)(K2_REG_MAC_BASE_ADDR + 0x7000); @@ -355,7 +333,7 @@ void _fw_usb_reset_fifo(void) A_PRINTF("\n change clock to 22 and go to suspend now!"); /* UART_SEL */ - HAL_WORD_REG_WRITE(0x50040, (0x200|0|(1>>1)<<12)); + iowrite32(0x50040, 0x200 | 0 | (1 >> 1) << 12); A_UART_HWINIT((22*1000*1000), 19200); } #endif