From: Christian Lamparter <chunkeey@googlemail.com>
Date: Wed, 23 Nov 2011 23:30:41 +0000 (+0100)
Subject: carl9170 firmware: enable CONFIG_CARL9170FW_USB_INIT_FIRMWARE by default
X-Git-Tag: 1.9.5~16
X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=1fcad5bcdc30a644eee9722608c87d6362b9d644;p=carl9170fw.git

carl9170 firmware: enable CONFIG_CARL9170FW_USB_INIT_FIRMWARE by default

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
---

diff --git a/carlfw/src/fw.c b/carlfw/src/fw.c
index 74faf79..fde4a5d 100644
--- a/carlfw/src/fw.c
+++ b/carlfw/src/fw.c
@@ -38,15 +38,13 @@ const struct carl9170_firmware_descriptor __section(fwdsc) carl9170fw_desc = {
 					BIT(CARL9170FW_HANDLE_BACK_REQ) |
 					BIT(CARL9170FW_RX_FILTER) |
 					BIT(CARL9170FW_HW_COUNTERS) |
-#ifdef CONFIG_CARL9170FW_USB_INIT_FIRMWARE
 					BIT(CARL9170FW_USB_INIT_FIRMWARE) |
-# ifdef CONFIG_CARL9170FW_USB_UP_STREAM
+#ifdef CONFIG_CARL9170FW_USB_UP_STREAM
 					BIT(CARL9170FW_USB_UP_STREAM) |
-# endif /* CONFIG_CARL9170FW_USB_UP_STREAM */
-# ifdef CONFIG_CARL9170FW_USB_DOWN_STREAM
+#endif /* CONFIG_CARL9170FW_USB_UP_STREAM */
+#ifdef CONFIG_CARL9170FW_USB_DOWN_STREAM
 					BIT(CARL9170FW_USB_DOWN_STREAM) |
-# endif /* CONFIG_CARL9170FW_USB_DOWN_STREAM */
-#endif /* CONFIG_CARL9170FW_USB_INIT_FIRMWARE */
+#endif /* CONFIG_CARL9170FW_USB_DOWN_STREAM */
 #ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
 					BIT(CARL9170FW_COMMAND_PHY) |
 					BIT(CARL9170FW_PSM) |
diff --git a/carlfw/usb/Kconfig b/carlfw/usb/Kconfig
index c1dad33..dc70776 100644
--- a/carlfw/usb/Kconfig
+++ b/carlfw/usb/Kconfig
@@ -9,14 +9,6 @@ config CARL9170FW_USB_STANDARD_CMDS
 
 	 Say Y, unless you don't care if lsusb -v fails.
 
-config CARL9170FW_USB_INIT_FIRMWARE
-	def_bool y
-	prompt "USB Interface Setup"
-	---help---
-	 Firmware should initialize the USB chip.
-
-	 Just say Y.
-
 config CARL9170FW_USB_UP_STREAM
 	def_bool y
 	prompt "USB Upload Stream"
diff --git a/carlfw/usb/usb.c b/carlfw/usb/usb.c
index 9ff31c4..74b8f8c 100644
--- a/carlfw/usb/usb.c
+++ b/carlfw/usb/usb.c
@@ -189,7 +189,6 @@ static void usb_reset_eps(void)
 #endif /* CONFIG_CARL9170FW_USB_MODESWITCH */
 
 
-#ifdef CONFIG_CARL9170FW_USB_INIT_FIRMWARE
 static void usb_pta_init(void)
 {
 	unsigned int usb_dma_ctrl = 0;
@@ -251,13 +250,10 @@ static void usb_pta_init(void)
 
 	set(AR9170_USB_REG_DMA_CTL, usb_dma_ctrl);
 }
-#endif /* CONFIG_CARL9170FW_USB_INIT_FIRMWARE */
 
 void usb_init(void)
 {
-#ifdef CONFIG_CARL9170FW_USB_INIT_FIRMWARE
 	usb_pta_init();
-#endif /* CONFIG_CARL9170FW_USB_INIT_FIRMWARE */
 
 	fw.usb.config = 1;
 	/*