From: Oleksij Rempel Date: Thu, 3 Nov 2016 10:37:12 +0000 (+0100) Subject: remove unused magpie_mem.h X-Git-Url: https://jxself.org/git/?a=commitdiff_plain;h=1a74dd4ff75654a80ac882cc3db7f995c1b5903b;p=open-ath9k-htc-firmware.git remove unused magpie_mem.h Signed-off-by: Oleksij Rempel --- diff --git a/target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h b/target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h deleted file mode 100755 index 651f94c..0000000 --- a/target_firmware/magpie_fw_dev/target/inc/k2/magpie_mem.h +++ /dev/null @@ -1,141 +0,0 @@ -/* - * Copyright (c) 2013 Qualcomm Atheros, Inc. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted (subject to the limitations in the - * disclaimer below) provided that the following conditions are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in the - * documentation and/or other materials provided with the - * distribution. - * - * * Neither the name of Qualcomm Atheros nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE - * GRANTED BY THIS LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT - * HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE - * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE - * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR - * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF - * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR - * BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, - * WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE - * OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN - * IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ -/*************************************************************************/ -/* Copyright (c) 2006 Atheros Communications, Inc., All Rights Reserved */ -/* */ -/* Module Name : mem_addrs.h */ -/* */ -/* Abstract */ -/* This file contains definition of the memory related information. */ -/* */ -/* NOTES */ -/* None */ -/* */ -/*************************************************************************/ - -#ifndef _MEM_ADDRS_H_ -#define _MEM_ADDRS_H_ - -#define SYS_ROM_BLOCK_SIZE (32*1024) -#if MAGPIE_FPGA_RAM_256K == 1 -#define SYS_ROM_BLOCK_NUM 2 //ram 256K version is also rom 64k version -#else -#define SYS_ROM_BLOCK_NUM 3 -#endif -#define SYS_ROM_SIZE (SYS_ROM_BLOCK_SIZE*SYS_ROM_BLOCK_NUM) - -#if MAGPIE_FPGA_RAM_256K == 1 -#define SYS_RAM_BLOCK_SIZE 64*1024 -#else -#define SYS_RAM_BLOCK_SIZE 40*1024 -#endif - -#define SYS_RAM_BLOCK_NUM 4 -#define SYS_RAM_SZIE (SYS_RAM_BLOCK_SIZE*SYS_RAM_BLOCK_NUM) - -/* instruction port area */ -#define SYS_I_R0M_REGION_0_BASE 0x8e0000 - -#define SYS_I_RAM_REGION_0_BASE 0x900000 -#define SYS_I_RAM_REGION_1_BASE (SYS_I_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE) -#define SYS_I_RAM_REGION_2_BASE (SYS_I_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE) -#define SYS_I_RAM_REGION_3_BASE (SYS_I_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE) - -/* data port area */ -#define SYS_D_R0M_REGION_0_BASE 0x4e0000 - -#define SYS_D_RAM_REGION_0_BASE 0x500000 -#define SYS_D_RAM_REGION_1_BASE (SYS_D_RAM_REGION_0_BASE+SYS_RAM_BLOCK_SIZE) -#define SYS_D_RAM_REGION_2_BASE (SYS_D_RAM_REGION_1_BASE+SYS_RAM_BLOCK_SIZE) -#define SYS_D_RAM_REGION_3_BASE (SYS_D_RAM_REGION_2_BASE+SYS_RAM_BLOCK_SIZE) - -/* data and bss section */ - -#define SYS_D_RAM_DATA_BSS SYS_D_RAM_REGION_0_BASE -#define SYS_D_RAM_DATA_BSS_SZ SYS_RAM_BLOCK_SIZE -#define SYS_D_RAM_STACK_SIZE (2*1024) - -///////////////////////////////////////////////////////////////////////////////////// -#define EEPROM_CTRL_BASE 0x10ff0000 -#define EEPROM_ADDR_BASE (EEPROM_CTRL_BASE+0x2000) - -#define EEPROM_SIZE 0xfff // 4K addressing space, each has 2 bytes, (a half word) -#define EEPROM_START_OFFSET 0 // THIS SHOULD NOT MODIFY -#define EEPROM_END_OFFSET (EEPROM_START_OFFSET+EEPROM_SIZE) // end of the eeprom offset - -///////////////////////////////////////////////////////////////////////////////////// -#define EEPROM_USB_DESCRIPTOR_ADDR ((uint32_t)&_bss_end) // address at RAM to put descriptor data -#define USB_DESC_START_ADDR 0x780 -#define USB_DESCRIPTOR_ADDR USB_DESC_START_ADDR // eeprom offset to sotre the descriptor data - -#define USB_DESC_IN_EEPROM_SIZE 2 // indicate eeprom is exist in eeprom -#define USB_DEVICE_DESCRIPTOR_SIZE 16 // Device Descriptor -#define USB_STRING00_DESCRIPTOR_SIZE 6 // 16 half word -#define USB_STRING10_DESCRIPTOR_SIZE 12 // Manufacture data -#define USB_STRING20_DESCRIPTOR_SIZE 16 // Product/Company data -#define USB_STRING30_DESCRIPTOR_SIZE 8 // Serial Number - -#define USB_DEVICE_PID_SIZE 1 // PID SIZE, 1 halfword offset -#define USB_DEVICE_VID_SIZE 1 // VID SIZE, 1 halfword offset - -#define USB_DESC_IN_EEPROM_FLAG_OFFSET USB_DESCRIPTOR_ADDR -#define USB_DEVICE_DESCRIPTOR_OFFSET (USB_DESC_IN_EEPROM_FLAG_OFFSET+USB_DESC_IN_EEPROM_SIZE) -#define USB_STRING00_DESCRIPTOR_OFFSET (USB_DEVICE_DESCRIPTOR_OFFSET+USB_DEVICE_DESCRIPTOR_SIZE) -#define USB_STRING10_DESCRIPTOR_OFFSET (USB_STRING00_DESCRIPTOR_OFFSET+USB_STRING00_DESCRIPTOR_SIZE) -#define USB_STRING20_DESCRIPTOR_OFFSET (USB_STRING10_DESCRIPTOR_OFFSET+USB_STRING10_DESCRIPTOR_SIZE) -#define USB_STRING30_DESCRIPTOR_OFFSET (USB_STRING20_DESCRIPTOR_OFFSET+USB_STRING20_DESCRIPTOR_SIZE) - -#define USB_DEVICE_VID_OFFSET (USB_DEVICE_DESCRIPTOR_OFFSET+4) -#define USB_DEVICE_PID_OFFSET (USB_DEVICE_VID_OFFSET+USB_DEVICE_VID_SIZE) - -#define USB_DESC_IN_EEPROM_FLAG_ADDR EEPROM_USB_DESCRIPTOR_ADDR -#define USB_DEVICE_DESCRIPTOR_ADDR (USB_DESC_IN_EEPROM_FLAG_ADDR+(USB_DESC_IN_EEPROM_SIZE*2)) -#define USB_STRING00_DESCRIPTOR_ADDR (USB_DEVICE_DESCRIPTOR_ADDR+(USB_DEVICE_DESCRIPTOR_SIZE*2)) -#define USB_STRING10_DESCRIPTOR_ADDR (USB_STRING00_DESCRIPTOR_ADDR+(USB_STRING00_DESCRIPTOR_SIZE*2)) -#define USB_STRING20_DESCRIPTOR_ADDR (USB_STRING10_DESCRIPTOR_ADDR+(USB_STRING10_DESCRIPTOR_SIZE*2)) -#define USB_STRING30_DESCRIPTOR_ADDR (USB_STRING20_DESCRIPTOR_ADDR+(USB_STRING20_DESCRIPTOR_SIZE*2)) - -#define USB_DEVICE_VID_ADDR (USB_DEVICE_DESCRIPTOR_ADDR+4) -#define USB_DEVICE_PID_ADDR (USB_DEVICE_VID_ADDR+USB_DEVICE_VID_SIZE) - -#define USB_DESC_IN_EEP_PATTERN 0x41544852 //ATHR - -/****************************** patch in eeprom *****************************************/ -#define ROM_PATCH_EEPROM_SIZE 2 // 4 bytes - -#define ROM_PATCH_EEPROM_OFFSET 0xfc -#define ROM_PATCH_BUF_ADDR SYS_D_RAM_REGION_3_BASE - -#endif /* _MEM_ADDRS_H_ */