X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=tfc_error.c;h=b8cc4323b00e610768a5eaf2ce62039a27aaf8d1;hb=HEAD;hp=7c001dacf0c52859b974e38e288733ff06e2cc06;hpb=efa545d64b910923248233618e774ca3b87efebb;p=tfcrypt.git diff --git a/tfc_error.c b/tfc_error.c index 7c001da..b8cc432 100644 --- a/tfc_error.c +++ b/tfc_error.c @@ -2,7 +2,7 @@ * tfcrypt -- high security Threefish encryption tool. * * tfcrypt is copyrighted: - * Copyright (C) 2012-2018 Andrey Rys. All rights reserved. + * Copyright (C) 2012-2019 Andrey Rys. All rights reserved. * * tfcrypt is licensed to you under the terms of std. MIT/X11 license: * @@ -33,13 +33,13 @@ void xerror(tfc_yesno noexit, tfc_yesno noerrno, tfc_yesno nostats, const char * va_list ap; char *s; - if (quiet) goto _ex; + if (quiet) goto _do_sil_exit; va_start(ap, fmt); - if (statline_was_shown == YES && do_statline_dynamic == YES) tfc_esay("\n"); + if (noexit == YES && (statline_was_shown == YES && do_statline_dynamic == YES)) tfc_esay("\n"); - tfc_nfsay(stderr, "%s: ", progname); + tfc_nfsay(stderr, "%s: ", tfc_format_pid(progname)); tfc_vfsay(stderr, NO, fmt, ap); if (errno && noerrno == NO) { s = strerror(errno); @@ -49,9 +49,11 @@ void xerror(tfc_yesno noexit, tfc_yesno noerrno, tfc_yesno nostats, const char * va_end(ap); - if (nostats == NO) print_crypt_status(-1); + if (nostats == NO) { + print_crypt_status(TFC_SIGERR); + } -_ex: +_do_sil_exit: if (noexit == YES) { errno = 0; return; @@ -62,6 +64,18 @@ _ex: void xexit(int status) { + if (status > 1) goto _do_clean_and_exit; + + if (do_ftrunc > TFC_NO_FTRUNC) { + if (do_ftrunc == TFC_FTRUNC_TAIL) ftrunc_dfd = total_processed_dst; + if (ftruncate(dfd, (off_t)ftrunc_dfd) == -1) xerror(YES, NO, YES, "ftruncate(%d)", dfd); + } + if (do_preserve_time) fcopy_matime(dfd, &s_stat); + +_do_clean_and_exit: + xclose(sfd); + xclose(dfd); + memset(srcblk, 0, sizeof(srcblk)); memset(dstblk, 0, sizeof(dstblk)); @@ -69,6 +83,7 @@ void xexit(int status) memset(ctr, 0, sizeof(ctr)); memset(mackey, 0, sizeof(mackey)); memset(xtskey, 0, sizeof(xtskey)); + memset(tweak, 0, sizeof(tweak)); memset(&sk, 0, sizeof(struct skein)); memset(&tfe, 0, sizeof(struct tfe_stream)); @@ -91,10 +106,69 @@ void usage(void) if (optopt == 'V') { tfc_say("tfcrypt toolkit, version %s.", _TFCRYPT_VERSION); + if (do_edcrypt != TFC_DO_PLAIN) { + char shash[64]; + + hash_defaults(shash, sizeof(shash)); + tfc_say("Defaults hash: %s", shash); + memset(shash, 0, sizeof(shash)); + } xexit(0); } - if ((strlen(progname) <= 9) + if (!strcmp(progname, "iotool")) { + is_embedded_prog = YES; + tfc_say("usage: %s [-E how] [-l length] [-O opts] [-aqvw] [-V secs] [source] [output]", progname); + tfc_say("\n"); + tfc_say("%s: do dd-like input/output, writing source to output whole or partially.", progname); + tfc_say(" -E how: how to behave on I/O errors (both src or dst):"); + tfc_say(" exit: print error if not quiet, then exit,"); + tfc_say(" cont: print error if not quiet, then continue,"); + tfc_say(" no action to pad missing data is attempted."); + tfc_say(" may be dangerous when working with block devices."); + tfc_say(" sync: print error if not quiet, then continue,"); + tfc_say(" pad missing data block with zeroes."); + tfc_say(" lsync: same as sync, but does not use SEEK_SET logic,"); + tfc_say(" lsync uses only relative seek operations, and does not prequery"); + tfc_say(" the current file position for exact offsets, which maybe unsafe."); + tfc_say(" For this reason, it is HIGHLY recommended to use sync instead!"); + tfc_say(" Note that both sync and lsync work only with read errors!"); + tfc_say(" default error action is exit with printing status if not quiet."); + tfc_say(" -E xall: turn on error actions above for all errors, not just EIO errors."); + tfc_say(" -E xseek: ignore positioning and other seek related errors."); + tfc_say(" Multiple -E specifiers may be given in separate options."); + tfc_say(" -a: shortcut of -O xtime."); + tfc_say(" -l length: read only these first bytes of source."); + tfc_say(" -O opts: set options (comma separated list):"); + tfc_say(" ro: open all files only for reading, even those intended for writing,"); + tfc_say(" sync: request a synchronous I/O for a output,"); + tfc_say(" fsync: on each write() call a corresponding fsync(fd),"); + tfc_say(" trunc: open(O_WRONLY) will truncate output file to zero size."); + tfc_say(" append: open(O_APPEND) will append data to output file."); + tfc_say(" pad: pad incomplete (l.t. %u bytes) block with zeroes.", TFC_U(TF_BLOCK_SIZE)); + tfc_say(" xtime: copy timestamps from source to destination files."); + tfc_say(" gibsize: use SI units of size: 1k = 1000. Applies only to size prefixes."); + tfc_say(" Computers convention is to use 1024, whereas SI/hdd measure in 1000."); + tfc_say(" plainstats: force status line to be plain: no fancy dynamic stuff."); + tfc_say(" Dynamic line works well only on VT100 compatible ttys, and"); + tfc_say(" when the whole status line width is smaller than tty width."); + tfc_say(" statless: emit less information in status line (only processed data)."); + tfc_say(" iobs=val: set IO block size value. Must not exceed %u bytes.", TFC_U(TFC_BLKSIZE)); + tfc_say(" nobuf: disable IO buffering, write as soon as data received (only for stream ciphers!)"); + tfc_say(" iseek=val: seek source file/device by these val bytes."); + tfc_say(" oseek=val: seek destination file/device by these val bytes."); + tfc_say(" ioseek=val: seek both source and destination."); + tfc_say(" ioseek is equal to iseek and oseek."); + tfc_say(" count=val: process only these val bytes, both input and output."); + tfc_say(" ftrunc=val: truncate output file to these val bytes before closing it."); + tfc_say(" ftrunc=tail: truncate output's tail, leaving only processed data."); + tfc_say(" -w: overwrite source file. If not file, ignored."); + tfc_say(" -q: always be quiet, never tell anything (except when signaled)."); + tfc_say(" -v: print number of read and written encrypted bytes, and explain stages."); + tfc_say(" -V seconds: activate timer that will repeatedly print statistics to stderr."); + tfc_say("\n"); + } + else if ((strlen(progname) <= 9) && ((!strcmp(progname, "sksum")) || ((!memcmp(progname, "sk", 2)) && (!memcmp(progname+3, "sum", 3) @@ -128,6 +202,22 @@ void usage(void) tfc_say("no error checking is performed."); tfc_say("\n"); } + else if (!strcmp(progname, "xor")) { + is_embedded_prog = YES; + tfc_say("usage: %s [sourceX] [sourceY] [output]", progname); + tfc_say("\n"); + tfc_say("tfcrypt embedded high performance XOR tool."); + tfc_say("It does XOR (multiply modulo 2) of each byte from sourceX"); + tfc_say("each byte of sourceY and writes output."); + tfc_say("If filenames omitted, it is assumed to operate over"); + tfc_say("standard in to standard out."); + tfc_say("If any of source files is shorter than another,"); + tfc_say("then output is truncated to length of the shortest one."); + tfc_say("\n"); + tfc_say("No error checking is performed."); + tfc_say("Please use iotool options there."); + tfc_say("\n"); + } else if (!strcmp(progname, "tfbench")) { is_embedded_prog = YES; tfc_say("usage: %s seconds", progname); @@ -151,22 +241,31 @@ void usage(void) tfc_say("convert encrypted data into ASCII format to ease transmission."); tfc_say("\n"); tfc_say(" -e, -d: encrypt, decrypt (it maybe required)."); + tfc_say(" -L : load tfcrypt defaults from file."); + tfc_say(" defaults is text file which defines salt, nr_turns and default mode."); + tfc_say(" -s : load tfcrypt salt from file."); + tfc_say(" -s disable: disable key salting at all."); tfc_say(" -p: instead of using key, ask for password."); tfc_say(" -k: use raw (%u byte) key instead of deriving it from arbitrary data.", TFC_U(TF_KEY_SIZE)); tfc_say(" -z: ask for key in plain C string form through password asker."); tfc_say(" -x: ask for key in hex string form through password asker."); tfc_say(" -K : generate key from keyfile or password and write it to file."); - tfc_say(" -T: enable tfcrypt1 old mode (useful only for old encryptions)."); - tfc_say(" -t : use tweak from file (useful only for old encryptions)."); + tfc_say(" -t : use (raw) tweak from file."); tfc_say(" -w: overwrite source file. If not file, ignored."); tfc_say(" -n TURNS: number of turns to perform in Skein function."); tfc_say(" Default is always defined when building tfcrypt."); - tfc_say(" -C mode: mode of operation: CTR, STREAM, XTS, ECB, CBC, OCB."); + tfc_say(" -C mode: mode of operation: CTR, STREAM, XTS, ECB, CBC."); tfc_say(" Default encryption mode can be changed when building tfcrypt."); tfc_say(" -c opt: initial CTR value initialisation mode:"); tfc_say(" show: do default action, then dump CTR value to stderr,"); tfc_say(" head: when decrypting, read CTR from beginning of stream,"); tfc_say(" rand: generate random CTR and write it to beginning of stream,"); + tfc_say(" zero: assume zero CTR is used, do not read from and write it to stream,"); + tfc_say(" hexc:nr[,hexc:nr,...]: construct counter from given pattern."); + tfc_say(" Example: \"ff:124,08:2,80:2\" will fill counter first with 124 0xff bytes,"); + tfc_say(" then with 2 0x08 bytes, then 2 0x80 bytes. To fill with zeroes, it is"); + tfc_say(" simple to specify just a \"0:128\" as a pattern. Note that bytes that"); + tfc_say(" exceed CTR space will be just dropped, and any unused bytes are set to zeroes."); tfc_say(" : read CTR from given file (both when encrypting/decrypting)."); tfc_say(" default is to derive CTR from user provided password or keyfile with"); tfc_say(" a single Skein function turn over derived, %u byte raw key", TFC_U(TF_KEY_SIZE)); @@ -174,6 +273,9 @@ void usage(void) tfc_say(" -v: print number of read and written encrypted bytes, and explain stages."); tfc_say(" -V seconds: activate timer that will repeatedly print statistics to stderr."); tfc_say(" -a: shortcut of -O xtime."); + tfc_say(" -g: same as '-e -C stream -c rand' or '-d -C stream -c head', depending on mode."); + tfc_say(" -j: same as '-e -C ctr -c rand' or '-d -C ctr -c head', depending on mode."); + tfc_say(" -l length: read only these first bytes of source."); tfc_say(" -r : specify random source instead of /dev/urandom."); tfc_say(" -R nr_bytes: generate nr_bytes of random bytes suitable for use as key data."); tfc_say(" -R also supports these aliases specified instead of nr_bytes:"); @@ -204,22 +306,34 @@ void usage(void) tfc_say(" -: read a detached MAC signature from stdin,"); tfc_say(" drop: do not verify attached MAC, if any, and drop it from output."); tfc_say(" -m: just verify MAC provided with -M. Do not write output file."); - tfc_say(" This option must be specified after -M."); + tfc_say(" -u: almost same as -m, but turns on MAC pre-test mode, when verified"); + tfc_say(" signature enables writing output file. It is useful when decrypting small texts."); + tfc_say(" The source must be a seekable file, otherwise this mode will be disabled."); + tfc_say(" In this mode, decryption is done twice and verification done once."); + tfc_say(" Both -m and -u options must be specified after -M."); tfc_say(" -E how: how to behave on I/O errors (both src or dst):"); tfc_say(" exit: print error if not quiet, then exit,"); tfc_say(" cont: print error if not quiet, then continue,"); tfc_say(" no action to pad missing data is attempted."); tfc_say(" may be dangerous when working with block devices."); - tfc_say(" sync: print error if not quiet, then continue."); + tfc_say(" sync: print error if not quiet, then continue,"); tfc_say(" pad missing data block with zeroes."); - tfc_say(" note that sync works only with read errors!"); + tfc_say(" lsync: same as sync, but does not use SEEK_SET logic,"); + tfc_say(" lsync uses only relative seek operations, and does not prequery"); + tfc_say(" the current file position for exact offsets, which maybe unsafe."); + tfc_say(" For this reason, it is HIGHLY recommended to use sync instead!"); + tfc_say(" Note that both sync and lsync work only with read errors!"); tfc_say(" default error action is exit with printing status if not quiet."); tfc_say(" -E xall: turn on error actions above for all errors, not just EIO errors."); - tfc_say(" This must be a separate option given before usual -E how option."); + tfc_say(" -E xseek: ignore positioning and other seek related errors."); + tfc_say(" Multiple -E specifiers may be given in separate options."); + tfc_say(" -o logfile: redirect all messages to logfile instead of stderr."); tfc_say(" -O opts: set options (comma separated list):"); + tfc_say(" ro: open all files only for reading, even those intended for writing,"); tfc_say(" sync: request a synchronous I/O for a output,"); tfc_say(" fsync: on each write() call a corresponding fsync(fd),"); tfc_say(" trunc: open(O_WRONLY) will truncate output file to zero size."); + tfc_say(" append: open(O_APPEND) will append data to output file."); tfc_say(" pad: pad incomplete (l.t. %u bytes) block with zeroes.", TFC_U(TF_BLOCK_SIZE)); tfc_say(" xtime: copy timestamps from source to destination files."); tfc_say(" gibsize: use SI units of size: 1k = 1000. Applies only to size prefixes."); @@ -229,10 +343,16 @@ void usage(void) tfc_say(" when the whole status line width is smaller than tty width."); tfc_say(" statless: emit less information in status line (only processed data)."); tfc_say(" norepeat: do not ask for any possible password confirmations."); + tfc_say(" showsecrets: show passwords in plaintext instead of masking them."); + tfc_say(" finished: add \"finished\" word before status line when work is finished."); + tfc_say(" pid: show %s's process id near it's name in error messages, logs etc.", progname); + tfc_say(" readloops=val: when seekable source ends, reading continues from it's beginning again."); tfc_say(" prompt=str: set main password prompts to this string."); tfc_say(" macprompt=str: set MAC password prompts to this string."); tfc_say(" shorthex: with -H, do not print printable characters, dump only hex string."); + tfc_say(" logfile: (same as -o) redirect all messages to logfile instead of stderr."); tfc_say(" iobs=val: set IO block size value. Must not exceed %u bytes.", TFC_U(TFC_BLKSIZE)); + tfc_say(" nobuf: disable IO buffering, write as soon as data received (only for stream ciphers!)"); tfc_say(" xtsblocks=val: use these nr of TF blocks per XTS block. Default is %u.", TFC_U(TFC_XTSBLOCKS)); tfc_say(" iseek=val: seek source file/device by these val bytes."); tfc_say(" Initial counter is adjusted automatically."); @@ -244,10 +364,17 @@ void usage(void) tfc_say(" ixctr=val: Increment initial counter by this val bytes."); tfc_say(" Internally this number is translated into number of %u byte blocks.", TFC_U(TF_BLOCK_SIZE)); tfc_say(" oseek=val: seek destination file/device by these val bytes."); + tfc_say(" ioseek=val: seek both source and destination."); + tfc_say(" ioseek is equal to iseek and oseek."); tfc_say(" count=val: process only these val bytes, both input and output."); + tfc_say(" ftrunc=val: truncate output file to these val bytes before closing it."); + tfc_say(" ftrunc=tail: truncate output's tail, leaving only processed data."); tfc_say(" xkey=val: take only val bytes from user keyfile."); + tfc_say(" okey=val: seek the key before reading it (usually a device)."); tfc_say(" xctr=val: specify size in bytes of initial counter prepended or read."); + tfc_say(" fullkey: occupy tweak space by key space, extending key size by 256 bits."); tfc_say(" -P: plain IO mode: disable encryption/decryption code at all."); + tfc_say(" -X: XOR IO mode: same as -P but do XOR of two streams."); tfc_say("\n"); tfc_say("Default is to ask for password, then encrypt stdin into stdout."); tfc_say("Some cmdline parameters may be mutually exclusive, or they can");