X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=target_firmware%2Fwlan%2Fratectrl11n.h;h=ccd6f77ea4712c05e8e567639cc231fc7d6236e2;hb=014ff6fde0fab968eb5b4365e83a93a2fff452c2;hp=f220819fe10ee820033964a9ae43b04ac4614b31;hpb=eaacae6cedaf752150758b9baa0917e1deb1a99f;p=open-ath9k-htc-firmware.git

diff --git a/target_firmware/wlan/ratectrl11n.h b/target_firmware/wlan/ratectrl11n.h
index f220819..ccd6f77 100755
--- a/target_firmware/wlan/ratectrl11n.h
+++ b/target_firmware/wlan/ratectrl11n.h
@@ -40,8 +40,8 @@
  * used only in 20 mode. If both 20/40 bits are enabled
  * then that rate can be used for both 20 and 40 mode */
 
-#define TRUE_20	 	0x2	
-#define TRUE_40 	0x4	
+#define TRUE_20	 	0x2
+#define TRUE_40 	0x4
 #define TRUE_2040	(TRUE_20|TRUE_40)
 #define TRUE_ALL_11N	(TRUE_2040|TRUE)
 
@@ -62,19 +62,19 @@ typedef enum {
 #define WLAN_RC_PHY_DS(_phy)   ((_phy == WLAN_RC_PHY_HT_20_DS)		\
                                 || (_phy == WLAN_RC_PHY_HT_40_DS)	\
                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)	\
-                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))   
+                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 #define WLAN_RC_PHY_40(_phy)   ((_phy == WLAN_RC_PHY_HT_40_SS)		\
                                 || (_phy == WLAN_RC_PHY_HT_40_DS)	\
                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)	\
-                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))   
+                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 #define WLAN_RC_PHY_20(_phy)   ((_phy == WLAN_RC_PHY_HT_20_SS)		\
                                 || (_phy == WLAN_RC_PHY_HT_20_DS)	\
                                 || (_phy == WLAN_RC_PHY_HT_20_SS_HGI)	\
-                                || (_phy == WLAN_RC_PHY_HT_20_DS_HGI))   
+                                || (_phy == WLAN_RC_PHY_HT_20_DS_HGI))
 #define WLAN_RC_PHY_SGI(_phy)  ((_phy == WLAN_RC_PHY_HT_20_SS_HGI)      \
                                 || (_phy == WLAN_RC_PHY_HT_20_DS_HGI)   \
                                 || (_phy == WLAN_RC_PHY_HT_40_SS_HGI)   \
-                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))   
+                                || (_phy == WLAN_RC_PHY_HT_40_DS_HGI))
 
 #define WLAN_RC_PHY_HT(_phy)    (_phy >= WLAN_RC_PHY_HT_20_SS)
 
@@ -102,7 +102,7 @@ typedef enum {
 #define WLAN_RC_WEP_TKIP_FLAG   (0x100)
 
 /* Index into the rate table */
-#define INIT_RATE_MAX_20	23		
+#define INIT_RATE_MAX_20	23
 #define INIT_RATE_MAX_40	40
 
 /*
@@ -129,7 +129,7 @@ typedef struct {
 	A_BOOL    validSingleStream;/* Valid for use in rate control for single stream operation */
 #ifdef MAGPIE_MERLIN
 	A_BOOL    validSTBC;        /* Valid for use in rate control for single stream operation */
-#endif    
+#endif
 	WLAN_PHY  phy;              /* CCK/OFDM/TURBO/XR */
 	A_UINT32  rateKbps;         /* Rate in Kbits per second */
 	A_UINT32  userRateKbps;     /* User rate in KBits per second */
@@ -157,23 +157,9 @@ typedef struct {
 	rc11n_info_t     info[];
 } RATE_TABLE_11N;
 
-/*
- *  Update the SIB's rate control information
- *
- *  This should be called when the supported rates change
- *  (e.g. SME operation, wireless mode change)
- *
- *  It will determine which rates are valid for use.
- */
-void rcSibUpdate_11n(struct ath_softc_tgt *,
-		     struct ath_node_target *,
-		     A_UINT32 capflag, 
-		     A_BOOL keepState,
-		     struct ieee80211_rate *rs);
-
 /*
  * Determines and returns the new Tx rate index.
- */ 
+ */
 void rcRateFind_11n(struct ath_softc_tgt *sc,
 		    struct ath_node_target *an,
 		    int numTries,
@@ -197,9 +183,4 @@ void rcUpdate_11n(struct ath_softc_tgt *sc,
 		  int nBad,
 		  int sh_lo_retry);
 
-void ath_tx_status_update_rate(struct ath_softc_tgt *sc,
-			       struct ath_rc_series rcs[],
-			       int series,
-			       WMI_TXSTATUS_EVENT *txs);
-
 #endif /* _RATECTRL11N_H_ */