X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=target_firmware%2Fmagpie_fw_dev%2Fbuild%2Futility%2Fsh%2Fmake_fw.sh;fp=target_firmware%2Fmagpie_fw_dev%2Fbuild%2Futility%2Fsh%2Fmake_fw.sh;h=0000000000000000000000000000000000000000;hb=ff66305a044be28464fa0969ea2d605bb268d478;hp=3d0f828bdc307deacb0b837bd72ec34621996ceb;hpb=60b496560eec004ded92ae4dad43b3d102c6658d;p=open-ath9k-htc-firmware.git

diff --git a/target_firmware/magpie_fw_dev/build/utility/sh/make_fw.sh b/target_firmware/magpie_fw_dev/build/utility/sh/make_fw.sh
deleted file mode 100755
index 3d0f828..0000000
--- a/target_firmware/magpie_fw_dev/build/utility/sh/make_fw.sh
+++ /dev/null
@@ -1,88 +0,0 @@
-#!/bin/sh
-
-# Copyright (c) 2013 Qualcomm Atheros, Inc.
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted (subject to the limitations in the
-# disclaimer below) provided that the following conditions are met:
-#
-#  * Redistributions of source code must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  * Redistributions in binary form must reproduce the above copyright
-#    notice, this list of conditions and the following disclaimer in the
-#    documentation and/or other materials provided with the
-#    distribution.
-#
-#  * Neither the name of Qualcomm Atheros nor the names of its
-#    contributors may be used to endorse or promote products derived
-#    from this software without specific prior written permission.
-#
-# NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE
-# GRANTED BY THIS LICENSE.  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT
-# HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
-# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
-# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
-# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
-# BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE
-# OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN
-# IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# This script constructs an AR6002 ROM firmware binary image
-# for FPGA(if FPGA_FLAG is "1") or for actual silicon if FPGA_FLAG
-# is not "1".
-#
-# It takes two things as input:
-#   sw.rom.out, which is an ELF image of ROM software
-#        that was built for actual hardware or for FPGA
-#   data.rom.hw.bin OR data.rom.fpga.bin, which contains
-#        DataSets and other data that is to be included
-#        at the end of the firmware image
-#
-# It produces fw.rom.bin, a firmware image appropriate for
-# use with AR6002 ROM.
-#
-# The image is constructed by converting the sw.rom.out ELF
-# image to binary, padding at the end of that binary,
-# and appending the data binary from data.rom.*.bin.  So the
-# final fw.rom.bin image is a binary image that's exactly
-# the same size as the ROM hardware and which contains ROM
-# software (including literals, read-only data, data that
-# will be copied to RAM in order to initialize read/write data),
-# DataSet Metadata, and DataSets.
-
-
-sw_image=${sw_image:-$PRJ_ROOT/build/image/magpie/rom.out}
-sw_bin=${sw_bin:-$PRJ_ROOT/build/image/magpie/rom.bin}
-
-
-ds_in_rom="0x`xt-nm $sw_image | grep " _data_start_in_rom" | cut -b -8`"
-
-# Place data binary at the end of ROM.
-#data_start=$((9168*1024-`stat --format='%s' $data_bin`))
-
-xt-objcopy  \
-  --change-section-lma .lit4+0x400000 \
-  --change-section-vma .lit4+0x400000 \
-  --change-section-lma .rodata+0x400000 \
-  --change-section-vma .rodata+0x400000 \
-  --change-section-lma .dram0.literal+0x400000 \
-  --change-section-vma .dram0.literal+0x400000 \
-  --remove-section     .dport0.data \
-  --change-section-lma .data=$((ds_in_rom)) \
-  --change-section-vma .data=$((ds_in_rom)) \
-  -O binary $sw_image $sw_bin
-
-#cat $sw_bin $data_bin > $fw_bin
-
-#if [ `stat --format='%s' $fw_bin` -ne $((96*1024)) ]
-#then
-#  echo "$0 ERROR: firmware $fw_bin is NOT the expected size."
-#fi
-
-exit 0