X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=include%2Flinux%2Fieee80211.h;h=fa85ff3f998a0964eb2b559ca7f0200965207e53;hb=e0490281e8edf1c62d7fc41296cbdddb0e22d3a6;hp=03eecee20d9b34eb893bd057917cc321ef9c3718;hpb=d97b18331e8b86729d671eeda978fce42bab610e;p=carl9170fw.git

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 03eecee..fa85ff3 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -128,6 +128,8 @@
 
 #define IEEE80211_MAX_MESH_ID_LEN	32
 
+#define IEEE80211_NUM_TIDS		16
+
 #define IEEE80211_QOS_CTL_LEN		2
 /* 1d tag mask */
 #define IEEE80211_QOS_CTL_TAG1D_MASK		0x0007
@@ -678,6 +680,21 @@ struct ieee80211_meshconf_ie {
 	u8 meshconf_cap;
 } __attribute__ ((packed));
 
+/**
+ * enum mesh_config_capab_flags - Mesh Configuration IE capability field flags
+ *
+ * @IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS: STA is willing to establish
+ *	additional mesh peerings with other mesh STAs
+ * @IEEE80211_MESHCONF_CAPAB_FORWARDING: the STA forwards MSDUs
+ * @IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING: TBTT adjustment procedure
+ *	is ongoing
+ */
+enum mesh_config_capab_flags {
+	IEEE80211_MESHCONF_CAPAB_ACCEPT_PLINKS		= 0x01,
+	IEEE80211_MESHCONF_CAPAB_FORWARDING		= 0x08,
+	IEEE80211_MESHCONF_CAPAB_TBTT_ADJUSTING		= 0x20,
+};
+
 /**
  * struct ieee80211_rann_ie
  *
@@ -1176,11 +1193,13 @@ struct ieee80211_ht_operation {
  *	STA can receive. Rate expressed in units of 1 Mbps.
  *	If this field is 0 this value should not be used to
  *	consider the highest RX data rate supported.
+ *	The top 3 bits of this field are reserved.
  * @tx_mcs_map: TX MCS map 2 bits for each stream, total 8 streams
  * @tx_highest: Indicates highest long GI VHT PPDU data rate
  *	STA can transmit. Rate expressed in units of 1 Mbps.
  *	If this field is 0 this value should not be used to
  *	consider the highest TX data rate supported.
+ *	The top 3 bits of this field are reserved.
  */
 struct ieee80211_vht_mcs_info {
 	__le16 rx_mcs_map;
@@ -1189,6 +1208,27 @@ struct ieee80211_vht_mcs_info {
 	__le16 tx_highest;
 } __packed;
 
+/**
+ * enum ieee80211_vht_mcs_support - VHT MCS support definitions
+ * @IEEE80211_VHT_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
+ *	number of streams
+ * @IEEE80211_VHT_MCS_SUPPORT_0_8: MCSes 0-8 are supported
+ * @IEEE80211_VHT_MCS_SUPPORT_0_9: MCSes 0-9 are supported
+ * @IEEE80211_VHT_MCS_NOT_SUPPORTED: This number of streams isn't supported
+ *
+ * These definitions are used in each 2-bit subfield of the @rx_mcs_map
+ * and @tx_mcs_map fields of &struct ieee80211_vht_mcs_info, which are
+ * both split into 8 subfields by number of streams. These values indicate
+ * which MCSes are supported for the number of streams the value appears
+ * for.
+ */
+enum ieee80211_vht_mcs_support {
+	IEEE80211_VHT_MCS_SUPPORT_0_7	= 0,
+	IEEE80211_VHT_MCS_SUPPORT_0_8	= 1,
+	IEEE80211_VHT_MCS_SUPPORT_0_9	= 2,
+	IEEE80211_VHT_MCS_NOT_SUPPORTED	= 3,
+};
+
 /**
  * struct ieee80211_vht_cap - VHT capabilities
  *
@@ -1202,6 +1242,21 @@ struct ieee80211_vht_cap {
 	struct ieee80211_vht_mcs_info supp_mcs;
 } __packed;
 
+/**
+ * enum ieee80211_vht_chanwidth - VHT channel width
+ * @IEEE80211_VHT_CHANWIDTH_USE_HT: use the HT operation IE to
+ *	determine the channel width (20 or 40 MHz)
+ * @IEEE80211_VHT_CHANWIDTH_80MHZ: 80 MHz bandwidth
+ * @IEEE80211_VHT_CHANWIDTH_160MHZ: 160 MHz bandwidth
+ * @IEEE80211_VHT_CHANWIDTH_80P80MHZ: 80+80 MHz bandwidth
+ */
+enum ieee80211_vht_chanwidth {
+	IEEE80211_VHT_CHANWIDTH_USE_HT		= 0,
+	IEEE80211_VHT_CHANWIDTH_80MHZ		= 1,
+	IEEE80211_VHT_CHANWIDTH_160MHZ		= 2,
+	IEEE80211_VHT_CHANWIDTH_80P80MHZ	= 3,
+};
+
 /**
  * struct ieee80211_vht_operation - VHT operation IE
  *