X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fusb%2Fmain.c;h=dc48bf2115a4537fb3477ade2a33e4a124f5850b;hb=dc294e837216a4b10470b63203cc3b0070444b45;hp=a1cd2c9919b90fad5272e6c42c18d0c69902e91e;hpb=95e0b3d5f76e191546422c4dbb7afd2ad679ff8d;p=carl9170fw.git

diff --git a/carlfw/usb/main.c b/carlfw/usb/main.c
index a1cd2c9..dc48bf2 100644
--- a/carlfw/usb/main.c
+++ b/carlfw/usb/main.c
@@ -222,6 +222,19 @@ static void turn_power_off(void)
 
 	set(AR9170_PWR_REG_BASE, 0x40021);
 
+	set(AR9170_MAC_REG_DMA_TRIGGER, 0);
+
+	andl(AR9170_USB_REG_DMA_CTL, ~(AR9170_USB_DMA_CTL_ENABLE_TO_DEVICE |
+				       AR9170_USB_DMA_CTL_ENABLE_FROM_DEVICE |
+				       AR9170_USB_DMA_CTL_UP_PACKET_MODE |
+				       AR9170_USB_DMA_CTL_DOWN_STREAM));
+
+	/* Do a software reset to PTA component */
+	orl(AR9170_PTA_REG_DMA_MODE_CTRL, AR9170_PTA_DMA_MODE_CTRL_RESET);
+	andl(AR9170_PTA_REG_DMA_MODE_CTRL, ~AR9170_PTA_DMA_MODE_CTRL_RESET);
+
+	orl(AR9170_PTA_REG_DMA_MODE_CTRL, AR9170_PTA_DMA_MODE_CTRL_DISABLE_USB);
+
 	set(AR9170_MAC_REG_POWER_STATE_CTRL,
 	    AR9170_MAC_POWER_STATE_CTRL_RESET);
 
@@ -268,18 +281,29 @@ static void turn_power_off(void)
 	set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_INTERNAL_ADDAC);
 }
 
-void __attribute__((noreturn)) reboot(void)
+static void disable_watchdog(void)
 {
+	if (!fw.watchdog_enable)
+		return;
+
 	/* write watchdog magic pattern for suspend  */
 	andl(AR9170_PWR_REG_WATCH_DOG_MAGIC, 0xffff);
 	orl(AR9170_PWR_REG_WATCH_DOG_MAGIC, 0x98760000);
 
 	/* Disable watchdog */
-	orl(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
+	set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
+}
+
+void __noreturn reboot(void)
+{
+	disable_watchdog();
 
 	/* Turn off power */
 	turn_power_off();
 
+	/* clean bootloader workspace */
+	memset(&dma_mem, 0, sizeof(dma_mem));
+
 	/* add by ygwei for work around USB PHY chirp sequence problem */
 	set(0x10f100, 0x12345678);
 
@@ -354,20 +378,18 @@ static void usb_handler(uint8_t usb_interrupt_level1)
 		}
 
 		if (usb_interrupt_level2 & BIT(2)) {
-			/* ACK USB suspend interrupt */
 			usb_suspend_ack();
 
-			/* Set GO_TO_SUSPEND bit to USB main control register */
-			setb(AR9170_USB_REG_MAIN_CTRL, BIT(3));
-
-			/* add by ygwei for work around USB PHY chirp sequence problem */
-			set(0x10f100, 0x12345678);
+			disable_watchdog();
 
-			reboot();
+			/* GO_TO_SUSPEND stops the CPU clock too. */
+			orb(AR9170_USB_REG_MAIN_CTRL, AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND);
 		}
 
-		if (usb_interrupt_level2 & BIT(3))
+		if (usb_interrupt_level2 & BIT(3)) {
 			usb_resume_ack();
+			reboot();
+		}
 	}
 }