X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fusb%2Fmain.c;h=c2ad6c3d71fcc79fc4b1bc082430f796931745cd;hb=6476369c2c6d4ba487408cb5daff8df0480d6b4a;hp=dc48bf2115a4537fb3477ade2a33e4a124f5850b;hpb=dc294e837216a4b10470b63203cc3b0070444b45;p=carl9170fw.git

diff --git a/carlfw/usb/main.c b/carlfw/usb/main.c
index dc48bf2..c2ad6c3 100644
--- a/carlfw/usb/main.c
+++ b/carlfw/usb/main.c
@@ -27,6 +27,7 @@
 #include "printf.h"
 #include "timer.h"
 #include "rom.h"
+#include "wl.h"
 #include "shared/phy.h"
 
 #ifdef CONFIG_CARL9170FW_DEBUG_USB
@@ -244,7 +245,7 @@ static void turn_power_off(void)
 				  AR9170_PWR_RESET_WLAN_MASK);
 	set(AR9170_PWR_REG_RESET, 0x0);
 
-	clock_set(false, AHB_20_22MHZ);
+	set(AR9170_PWR_REG_CLOCK_SEL, AHB_40MHZ_OSC);
 
 	set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);	/* 0x502b; */
 	set(AR9170_PHY_REG_ADC_SERIAL_CTL, AR9170_PHY_ADC_SCTL_SEL_EXTERNAL_RADIO);
@@ -328,21 +329,22 @@ static void usb_handler(uint8_t usb_interrupt_level1)
 	if (usb_interrupt_level1 & BIT(0)) {
 		usb_interrupt_level2 = getb(AR9170_USB_REG_INTR_SOURCE_0);
 
-		if (usb_interrupt_level2 & BIT(0))
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_SETUP)
 			usb_ep0setup();
 
-		if (usb_interrupt_level2 & BIT(1))
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_IN)
 			usb_ep0tx();
 
-		if (usb_interrupt_level2 & BIT(2))
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_OUT)
 			usb_ep0rx();
 
-		if (usb_interrupt_level2 & BIT(7)) {
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_ABORT) {
 			/* Clear the command abort interrupt */
-			andb(AR9170_USB_REG_INTR_SOURCE_0, 0x7f);
+			andb(AR9170_USB_REG_INTR_SOURCE_0, (uint8_t)
+			     ~AR9170_USB_INTR_SRC0_ABORT);
 		}
 
-		if (usb_interrupt_level2 & BIT(3) ||
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_FAIL ||
 		    fw.usb.ep0_action & CARL9170_EP0_STALL) {
 			/*
 			 * transmission failure.
@@ -352,7 +354,7 @@ static void usb_handler(uint8_t usb_interrupt_level1)
 			fw.usb.ep0_action &= ~CARL9170_EP0_STALL;
 		}
 
-		if (usb_interrupt_level2 & BIT(4) ||
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC0_END ||
 		    fw.usb.ep0_action & CARL9170_EP0_TRIGGER) {
 			/*
 			 * transmission done.
@@ -366,27 +368,36 @@ static void usb_handler(uint8_t usb_interrupt_level1)
 	if (usb_interrupt_level1 & BIT(7)) {
 		usb_interrupt_level2 = getb(AR9170_USB_REG_INTR_SOURCE_7);
 
-		if (usb_interrupt_level2 & BIT(7))
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_RX0BYTE)
 			usb_data_out0Byte();
 
-		if (usb_interrupt_level2 & BIT(6))
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_TX0BYTE)
 			usb_data_in0Byte();
 
-		if (usb_interrupt_level2 & BIT(1)) {
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_RESET) {
 			usb_reset_ack();
 			reboot();
 		}
 
-		if (usb_interrupt_level2 & BIT(2)) {
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_SUSPEND) {
 			usb_suspend_ack();
 
-			disable_watchdog();
+			fw.suspend_mode = CARL9170_HOST_SUSPENDED;
 
-			/* GO_TO_SUSPEND stops the CPU clock too. */
-			orb(AR9170_USB_REG_MAIN_CTRL, AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND);
+			if (!(fw.usb.device_feature & USB_DEVICE_REMOTE_WAKEUP)) {
+				disable_watchdog();
+
+				/* GO_TO_SUSPEND stops the CPU clock too. */
+				orb(AR9170_USB_REG_MAIN_CTRL, AR9170_USB_MAIN_CTRL_GO_TO_SUSPEND);
+			} else {
+				wlan_prepare_wol();
+			}
 		}
 
-		if (usb_interrupt_level2 & BIT(3)) {
+		if (usb_interrupt_level2 & AR9170_USB_INTR_SRC7_USB_RESUME) {
+			fw.suspend_mode = CARL9170_HOST_AWAKE;
+			andl(AR9170_USB_REG_WAKE_UP, AR9170_USB_WAKE_UP_WAKE);
+
 			usb_resume_ack();
 			reboot();
 		}
@@ -406,3 +417,11 @@ void handle_usb(void)
 		usb_trigger_in();
 }
 
+void usb_timer(void)
+{
+#ifdef CONFIG_CARL9170FW_WOL
+	if (fw.suspend_mode == CARL9170_AWAKE_HOST) {
+		orl(AR9170_USB_REG_WAKE_UP, AR9170_USB_WAKE_UP_WAKE);
+	}
+#endif /* CONFIG_CARL9170FW_WOL */
+}