X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=e36dfad2df0013ad7d22567b63754bf5065db7f3;hb=dbb81597c39e9ecf9a76420ac374a179d5b94c91;hp=80e7e21ee45cee6d807fd7813333db4b35d92df3;hpb=1a2fbaf4f621cbb37f36637b1d4101f453474f7a;p=carl9170fw.git

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 80e7e21..e36dfad 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -34,50 +34,6 @@
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
 
-static void timer_init(const unsigned int timer, const unsigned int interval)
-{
-	/* Set timer to periodic mode */
-	orl(AR9170_TIMER_REG_CONTROL, BIT(timer));
-
-	/* Set time interval */
-	set(AR9170_TIMER_REG_TIMER0 + (timer << 2), interval - 1);
-
-	/* Clear timer interrupt flag */
-	orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
-}
-
-void clock_set(enum cpu_clock_t clock_, bool on)
-{
-	/*
-	 * Word of Warning!
-	 * This setting does more than just mess with the CPU Clock.
-	 * So watch out, if you need _stable_ timer interrupts.
-	 */
-#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
-	if (fw.phy.frequency < 3000000)
-		set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
-	else
-		set(AR9170_PWR_REG_PLL_ADDAC, 0x5143);
-#else
-	set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
-#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
-
-	fw.ticks_per_usec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV,
-		get(AR9170_PWR_REG_PLL_ADDAC));
-
-	set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | clock_));
-
-	switch (clock_) {
-	case AHB_20_22MHZ:
-		fw.ticks_per_usec >>= 1;
-	case AHB_40MHZ_OSC:
-	case AHB_40_44MHZ:
-		fw.ticks_per_usec >>= 1;
-	case AHB_80_88MHZ:
-		break;
-	}
-}
-
 static void init(void)
 {
 	led_init();
@@ -126,44 +82,6 @@ static void handle_fw(void)
 		reboot();
 }
 
-static void timer0_isr(void)
-{
-	wlan_timer();
-
-#ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
-	gpio_timer();
-#endif /* CONFIG_CARL9170FW_GPIO_INTERRUPT */
-
-#ifdef CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT
-	set(AR9170_GPIO_REG_PORT_DATA, get(AR9170_GPIO_REG_PORT_DATA) ^ 1);
-#endif /* CONFIG_CARL9170FW_DEBUG_LED_HEARTBEAT */
-}
-
-static void handle_timer(void)
-{
-	uint32_t intr;
-
-	intr = get(AR9170_TIMER_REG_INTERRUPT);
-
-	/* ACK timer interrupt */
-	set(AR9170_TIMER_REG_INTERRUPT, intr);
-
-#define HANDLER(intr, flag, func)			\
-	do {						\
-		if ((intr & flag) != 0) {		\
-			intr &= ~flag;			\
-			func();				\
-		}					\
-	} while (0)
-
-	HANDLER(intr, BIT(0), timer0_isr);
-
-	if (intr)
-		DBG("Unhandled Timer Event %x", (unsigned int) intr);
-
-#undef HANDLER
-}
-
 static void tally_update(void)
 {
 	unsigned int boff, time, delta;