X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=b11f0489257068d3c21564c294e9835db30d2546;hb=592643728e9b7c37c918afee05df8142c6d7303e;hp=55acb44792e9fe776666d6bd218d2abfc037a4c5;hpb=561a9e137c373ca302c20428dc9b0f4de66e27b3;p=carl9170fw.git

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 55acb44..b11f048 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
 
@@ -159,8 +160,8 @@ static void __noreturn main_loop(void)
 
 /*
  * The bootcode will work with the device driver to load the firmware
- * onto the device's Program SRAM. The Program SRAM has a size of 32 KB
- * and also contains the stack, which grows down from 0x208000.
+ * onto the device's Program SRAM. The Program SRAM has a size of 16 KB
+ * and also contains the stack, which grows down from 0x204000.
  *
  * The Program SRAM starts at address 0x200000 on the device.
  * The firmware entry point (0x200004) is located in boot.S.
@@ -169,7 +170,7 @@ static void __noreturn main_loop(void)
 
 void start(void)
 {
-	clock_set(true, AHB_40MHZ_OSC);
+	clock_set(AHB_40MHZ_OSC, true);
 
 	/* watchdog magic pattern check */
 	if ((get(AR9170_PWR_REG_WATCH_DOG_MAGIC) & 0xffff0000) == 0x12340000) {