X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=8c13bf8988c87bb7f748c5b6240bedf4d119716d;hb=b94cc57fa4ee29cb70415b699a1efc5f66eb41c7;hp=bdb68babd58a79bbf583b3314573256cf6fe3a9f;hpb=e72388a0aa23da8bc8e24a0cbe9d523c5a9ce294;p=carl9170fw.git

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index bdb68ba..8c13bf8 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -19,8 +19,7 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * with this program; If not, see <http://www.gnu.org/licenses/>.
  */
 
 #include "carl9170.h"
@@ -29,6 +28,8 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "rf.h"
+#include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
 
@@ -43,29 +44,24 @@ static void init(void)
 	/* 25/50/100ms timer (depends on cpu clock) */
 	timer_init(0, 50000);
 
-	/* turn off all leds */
-	led_set(0);
+	/* USB init */
+	usb_init();
+
+	/* initialize DMA memory */
+	memset(&dma_mem, 0, sizeof(dma_mem));
 
 	/* fill DMA rings */
 	dma_init_descriptors();
 
-	/* USB init */
-	usb_init();
-
 	/* clear all interrupt */
 	set(AR9170_MAC_REG_INT_CTRL, 0xffff);
 
 	orl(AR9170_MAC_REG_AFTER_PNP, 1);
 
 	/* Init watch dog control flag */
-#ifdef CONFIG_CARL9170FW_WATCHDOG
 	fw.watchdog_enable = 1;
 
 	set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
-#else
-	fw.watchdog_enable = 0;
-	set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-#endif /* CONFIG_CARL9170FW_WATCHDOG */
 
 #ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
 	fw.cached_gpio_state.gpio = get(AR9170_GPIO_REG_PORT_DATA) &
@@ -76,14 +72,44 @@ static void init(void)
 	down_trigger();
 }
 
-static void __attribute__((noreturn)) main_loop(void)
+static void handle_fw(void)
 {
-	clock_set(true, AHB_40MHZ_OSC);
+	if (fw.watchdog_enable == 1)
+		set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
 
+	if (fw.reboot)
+		reboot();
+}
+
+static void tally_update(void)
+{
+	unsigned int time;
+
+	time = get_clock_counter();
+#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
+	if (fw.phy.state == CARL9170_PHY_ON) {
+		unsigned int boff, delta;
+
+		delta = (time - fw.tally_clock);
+
+		fw.tally.active += delta;
+
+		boff = get(AR9170_MAC_REG_BACKOFF_STATUS);
+		if (boff & AR9170_MAC_BACKOFF_TX_PE)
+			fw.tally.tx_time += delta;
+		if (boff & AR9170_MAC_BACKOFF_CCA)
+			fw.tally.cca += delta;
+	}
+#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
+	fw.tally_clock = time;
+	fw.counter++;
+}
+
+static void __noreturn main_loop(void)
+{
 	/* main loop */
 	while (1) {
-		if (fw.watchdog_enable == 1)
-			set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
+		handle_fw();
 
 		/*
 		 * Due to frame order persevation, the wlan subroutines
@@ -97,25 +123,23 @@ static void __attribute__((noreturn)) main_loop(void)
 
 		handle_timer();
 
-		fw.counter++;
+		tally_update();
 	}
 }
 
 /*
  * The bootcode will work with the device driver to load the firmware
- * onto the device's Program SRAM. The Program SRAM has a size of 32 KB
- * and also contains the stack, which grows down from 0x208000.
+ * onto the device's Program SRAM. The Program SRAM has a size of 16 KB
+ * and also contains the stack, which grows down from 0x204000.
  *
  * The Program SRAM starts at address 0x200000 on the device.
  * The firmware entry point (0x200004) is located in boot.S.
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void __attribute__((noreturn)) start(void)
+void __in_section(boot) __noreturn __visible start(void)
 {
-	/* initialize firmware context and DMA memory */
-	memset(&fw, 0, sizeof(fw));
-	memset(&dma_mem, 0, sizeof(dma_mem));
+	clock_set(AHB_40MHZ_OSC, true);
 
 	/* watchdog magic pattern check */
 	if ((get(AR9170_PWR_REG_WATCH_DOG_MAGIC) & 0xffff0000) == 0x12340000) {
@@ -143,5 +167,10 @@ void __attribute__((noreturn)) start(void)
 	    " ~`!1@2#3$4%%5^6&7*8(9)0_-+={[}]|\\:;\"'<,>.?/");
 #endif /* CONFIG_CARL9170FW_DEBUG */
 
+	/*
+	 * Tell the host, that the firmware has booted and is
+	 * now ready to process requests.
+	 */
+	send_cmd_to_host(0, CARL9170_RSP_BOOT, 0x00, NULL);
 	main_loop();
 }