X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=80e7e21ee45cee6d807fd7813333db4b35d92df3;hb=1a2fbaf4f621cbb37f36637b1d4101f453474f7a;hp=574154bafd1faaba526feb007e3f3bbd3009d764;hpb=f47f2e5344e6a07531825af13337aee8fdd45c68;p=carl9170fw.git

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 574154b..80e7e21 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "rf.h"
 #include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
@@ -45,17 +46,36 @@ static void timer_init(const unsigned int timer, const unsigned int interval)
 	orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
 }
 
-void clock_set(enum cpu_clock_t _clock, bool on)
+void clock_set(enum cpu_clock_t clock_, bool on)
 {
 	/*
 	 * Word of Warning!
 	 * This setting does more than just mess with the CPU Clock.
 	 * So watch out, if you need _stable_ timer interrupts.
 	 */
-
-	fw.ticks_per_msec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV, get(AR9170_PWR_REG_PLL_ADDAC)) >> 1;
-
-	set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | _clock));
+#ifdef CONFIG_CARL9170FW_RADIO_FUNCTIONS
+	if (fw.phy.frequency < 3000000)
+		set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+	else
+		set(AR9170_PWR_REG_PLL_ADDAC, 0x5143);
+#else
+	set(AR9170_PWR_REG_PLL_ADDAC, 0x5163);
+#endif /* CONFIG_CARL9170FW_RADIO_FUNCTIONS */
+
+	fw.ticks_per_usec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV,
+		get(AR9170_PWR_REG_PLL_ADDAC));
+
+	set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | clock_));
+
+	switch (clock_) {
+	case AHB_20_22MHZ:
+		fw.ticks_per_usec >>= 1;
+	case AHB_40MHZ_OSC:
+	case AHB_40_44MHZ:
+		fw.ticks_per_usec >>= 1;
+	case AHB_80_88MHZ:
+		break;
+	}
 }
 
 static void init(void)
@@ -144,6 +164,27 @@ static void handle_timer(void)
 #undef HANDLER
 }
 
+static void tally_update(void)
+{
+	unsigned int boff, time, delta;
+
+	time = get_clock_counter();
+	if (fw.phy.state == CARL9170_PHY_ON) {
+		delta = (time - fw.tally_clock);
+
+		fw.tally.active += delta;
+
+		boff = get(AR9170_MAC_REG_BACKOFF_STATUS);
+		if (boff & AR9170_MAC_BACKOFF_TX_PE)
+			fw.tally.tx_time += delta;
+		if (boff & AR9170_MAC_BACKOFF_CCA)
+			fw.tally.cca += delta;
+	}
+
+	fw.tally_clock = time;
+	fw.counter++;
+}
+
 static void __noreturn main_loop(void)
 {
 	/* main loop */
@@ -162,7 +203,7 @@ static void __noreturn main_loop(void)
 
 		handle_timer();
 
-		fw.counter++;
+		tally_update();
 	}
 }
 
@@ -176,7 +217,7 @@ static void __noreturn main_loop(void)
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void __section(boot) start(void)
+void __section(boot) __noreturn __visible start(void)
 {
 	clock_set(AHB_40MHZ_OSC, true);