X-Git-Url: https://jxself.org/git/?a=blobdiff_plain;f=carlfw%2Fsrc%2Fmain.c;h=574154bafd1faaba526feb007e3f3bbd3009d764;hb=af915846d44d23adc02c7ded807282d607b46faa;hp=55acb44792e9fe776666d6bd218d2abfc037a4c5;hpb=561a9e137c373ca302c20428dc9b0f4de66e27b3;p=carl9170fw.git

diff --git a/carlfw/src/main.c b/carlfw/src/main.c
index 55acb44..574154b 100644
--- a/carlfw/src/main.c
+++ b/carlfw/src/main.c
@@ -6,7 +6,7 @@
  * Copyright (c) 2000-2005 ZyDAS Technology Corporation
  * Copyright (c) 2007-2009 Atheros Communications, Inc.
  * Copyright	2009	Johannes Berg <johannes@sipsolutions.net>
- * Copyright 2009, 2010 Christian Lamparter <chunkeey@googlemail.com>
+ * Copyright 2009-2011	Christian Lamparter <chunkeey@googlemail.com>
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -29,6 +29,7 @@
 #include "printf.h"
 #include "gpio.h"
 #include "wl.h"
+#include "usb.h"
 
 #define AR9170_WATCH_DOG_TIMER		   0x100
 
@@ -44,6 +45,19 @@ static void timer_init(const unsigned int timer, const unsigned int interval)
 	orl(AR9170_TIMER_REG_INTERRUPT, BIT(timer));
 }
 
+void clock_set(enum cpu_clock_t _clock, bool on)
+{
+	/*
+	 * Word of Warning!
+	 * This setting does more than just mess with the CPU Clock.
+	 * So watch out, if you need _stable_ timer interrupts.
+	 */
+
+	fw.ticks_per_msec = GET_VAL(AR9170_PWR_PLL_ADDAC_DIV, get(AR9170_PWR_REG_PLL_ADDAC)) >> 1;
+
+	set(AR9170_PWR_REG_CLOCK_SEL, (uint32_t) ((on ? 0x70 : 0x600) | _clock));
+}
+
 static void init(void)
 {
 	led_init();
@@ -70,14 +84,9 @@ static void init(void)
 	orl(AR9170_MAC_REG_AFTER_PNP, 1);
 
 	/* Init watch dog control flag */
-#ifdef CONFIG_CARL9170FW_WATCHDOG
 	fw.watchdog_enable = 1;
 
 	set(AR9170_TIMER_REG_WATCH_DOG, AR9170_WATCH_DOG_TIMER);
-#else
-	fw.watchdog_enable = 0;
-	set(AR9170_TIMER_REG_WATCH_DOG, 0xffff);
-#endif /* CONFIG_CARL9170FW_WATCHDOG */
 
 #ifdef CONFIG_CARL9170FW_GPIO_INTERRUPT
 	fw.cached_gpio_state.gpio = get(AR9170_GPIO_REG_PORT_DATA) &
@@ -159,17 +168,17 @@ static void __noreturn main_loop(void)
 
 /*
  * The bootcode will work with the device driver to load the firmware
- * onto the device's Program SRAM. The Program SRAM has a size of 32 KB
- * and also contains the stack, which grows down from 0x208000.
+ * onto the device's Program SRAM. The Program SRAM has a size of 16 KB
+ * and also contains the stack, which grows down from 0x204000.
  *
  * The Program SRAM starts at address 0x200000 on the device.
  * The firmware entry point (0x200004) is located in boot.S.
  * we put _start() there with the linker script carl9170.lds.
  */
 
-void start(void)
+void __section(boot) start(void)
 {
-	clock_set(true, AHB_40MHZ_OSC);
+	clock_set(AHB_40MHZ_OSC, true);
 
 	/* watchdog magic pattern check */
 	if ((get(AR9170_PWR_REG_WATCH_DOG_MAGIC) & 0xffff0000) == 0x12340000) {