#include <unistd.h>
#include <stdlib.h>
#include <stdio.h>
-#include "main.h"
-#include "share.h" /* for SETUP */
-#include "misc.h"
+#include <string.h>
+#include <sys/time.h>
+#include "advent.h"
#include "funcs.h"
+#include "database.h"
/* hack to ignore GCC Unused Result */
#define IGNORE(r) do{if(r){}}while(0)
/* I/O routines (SPEAK, PSPEAK, RSPEAK, SETPRM, GETIN, YES) */
-#undef SPEAK
-void fSPEAK(long N) {
+void SPEAK(long N) {
long BLANK, CASE, I, K, L, NEG, NPARMS, PARM, PRMTYP, STATE;
/* Print the message which starts at LINES(N). Precede it with a blank line
* unless BLKLIN is false. */
-
if(N == 0)return;
BLANK=BLKLIN;
K=N;
LNPOSN=1;
STATE=0;
for (I=K; I<=L; I++) {
- PUTTXT(LINES[I],STATE,2,I);
+ PUTTXT(LINES[I],STATE,2);
} /* end loop */
LNPOSN=0;
L30: LNPOSN=LNPOSN+1;
CASE=2;
L345: if(PARMS[NPARMS] < 0) goto L395;
{long x = NPARMS+1; if(PARMS[x] < 0)CASE=0;}
- PUTTXT(PARMS[NPARMS],STATE,CASE,0);
+ PUTTXT(PARMS[NPARMS],STATE,CASE);
NPARMS=NPARMS+1;
goto L345;
if(PRMTYP == 31)CASE=1;
if(PRMTYP == 33)CASE=0;
I=LNPOSN;
- PUTTXT(PARMS[NPARMS],STATE,CASE,0);
- {long x = NPARMS+1; PUTTXT(PARMS[x],STATE,CASE,0);}
+ PUTTXT(PARMS[NPARMS],STATE,CASE);
+ {long x = NPARMS+1; PUTTXT(PARMS[x],STATE,CASE);}
if(PRMTYP == 13 && INLINE[I] >= 37 && INLINE[I] <=
62)INLINE[I]=INLINE[I]-26;
NPARMS=NPARMS+2;
return;
}
-
-
-#define SPEAK(N) fSPEAK(N)
-#undef PSPEAK
-void fPSPEAK(long MSG,long SKIP) {
+void PSPEAK(long MSG,long SKIP) {
long I, M;
/* Find the skip+1st message from msg and print it. MSG should be the index of
return;
}
-
-
-#define PSPEAK(MSG,SKIP) fPSPEAK(MSG,SKIP)
-#undef RSPEAK
-void fRSPEAK(long I) {
-;
+void RSPEAK(long I) {
/* Print the I-TH "random" message (section 6 of database). */
}
-
-#define RSPEAK(I) fRSPEAK(I)
-#undef SETPRM
-void fSETPRM(long FIRST, long P1, long P2) {
+void SETPRM(long FIRST, long P1, long P2) {
;
/* Stores parameters into the PRMCOM parms array for use by speak. P1 and P2
}
-
-#define SETPRM(FIRST,P1,P2) fSETPRM(FIRST,P1,P2)
#undef GETIN
#define WORD1 (*wORD1)
#define WORD1X (*wORD1X)
#define WORD2 (*wORD2)
#define WORD2X (*wORD2X)
-void fGETIN(FILE *input, long *wORD1, long *wORD1X, long *wORD2, long *wORD2X) {
+bool fGETIN(FILE *input, long *wORD1, long *wORD1X, long *wORD2, long *wORD2X) {
long JUNK;
/* Get a command from the adventurer. Snarf out the first word, pad it with
L10: if(BLKLIN)TYPE0();
MAPLIN(input);
- if(input == stdin && feof(stdin)) score(1);
- WORD1=GETTXT(true,true,true,0);
+ if (feof(input))
+ return false;
+ WORD1=GETTXT(true,true,true);
if(BLKLIN && WORD1 < 0) goto L10;
- WORD1X=GETTXT(false,true,true,0);
-L12: JUNK=GETTXT(false,true,true,0);
+ WORD1X=GETTXT(false,true,true);
+L12: JUNK=GETTXT(false,true,true);
if(JUNK > 0) goto L12;
- WORD2=GETTXT(true,true,true,0);
- WORD2X=GETTXT(false,true,true,0);
-L22: JUNK=GETTXT(false,true,true,0);
+ WORD2=GETTXT(true,true,true);
+ WORD2X=GETTXT(false,true,true);
+L22: JUNK=GETTXT(false,true,true);
if(JUNK > 0) goto L22;
- if(GETTXT(true,true,true,0) <= 0)return;
+ if(GETTXT(true,true,true) <= 0)return true;
RSPEAK(53);
goto L10;
}
#undef WORD2
#undef WORD2X
#define GETIN(SRC,WORD1,WORD1X,WORD2,WORD2X) fGETIN(SRC,&WORD1,&WORD1X,&WORD2,&WORD2X)
-#undef YES
-long fYES(FILE *input, long X, long Y, long Z) {
-long YES, REPLY, JUNK1, JUNK2, JUNK3;
+long YES(FILE *input, long X, long Y, long Z) {
+long YEAH, REPLY, JUNK1, JUNK2, JUNK3;
/* Print message X, wait for yes/no answer. If yes, print Y and return true;
* if no, print Z and return false. */
if(REPLY == MAKEWD(1415) || REPLY == MAKEWD(14)) goto L20;
RSPEAK(185);
goto L1;
-L10: YES=true;
+L10: YEAH=true;
RSPEAK(Y);
- return(YES);
-L20: YES=false;
+ return(YEAH);
+L20: YEAH=false;
RSPEAK(Z);
- return(YES);
+ return(YEAH);
}
-
-
-
/* Line-parsing routines (GETNUM, GETTXT, MAKEWD, PUTTXT, SHFTXT, TYPE0)
*/
-
/* The routines on this page handle all the stuff that would normally be
* taken care of by format statements. We do it this way instead so that
* we can handle textual data in a machine independent fashion. All the
* machine dependent i/o stuff is on the following page. See that page
* for a description of MAPCOM's inline array. */
-#define YES(X,Y,Z) fYES(X,Y,Z)
-#undef GETNUM
-long fGETNUM(FILE *source) {
-long DIGIT, GETNUM, SIGN;
+long GETNUM(FILE *source) {
+long DIGIT, NUMBER, SIGN;
/* Obtain the next integer from an input line. If K>0, we first read a
* new input line from a file; if K<0, we read a line from the keyboard;
if(source != NULL)MAPLIN(source);
- GETNUM=0;
-L10: if(LNPOSN > LNLENG)return(GETNUM);
+ NUMBER=0;
+L10: if(LNPOSN > LNLENG)return(NUMBER);
if(INLINE[LNPOSN] != 0) goto L20;
LNPOSN=LNPOSN+1;
goto L10;
L32: if(LNPOSN > LNLENG || INLINE[LNPOSN] == 0) goto L42;
DIGIT=INLINE[LNPOSN]-64;
if(DIGIT < 0 || DIGIT > 9) goto L40;
- GETNUM=GETNUM*10+DIGIT;
+ NUMBER=NUMBER*10+DIGIT;
goto L30;
-L40: GETNUM=0;
-L42: GETNUM=GETNUM*SIGN;
+L40: NUMBER=0;
+L42: NUMBER=NUMBER*SIGN;
LNPOSN=LNPOSN+1;
- return(GETNUM);
+ return(NUMBER);
}
-
-
-#define GETNUM(K) fGETNUM(K)
-#undef GETTXT
-long fGETTXT(long SKIP,long ONEWRD, long UPPER, long HASH) {
-long CHAR, GETTXT, I; static long SPLITTING = -1;
+long GETTXT(long SKIP,long ONEWRD, long UPPER) {
+long CHAR, TEXT, I; static long SPLITTING = -1;
/* Take characters from an input line and pack them into 30-bit words.
* Skip says to skip leading blanks. ONEWRD says stop if we come to a
- * blank. UPPER says to map all letters to uppercase. HASH may be used
- * as a parameter for encrypting the text if desired; however, a hash of 0
- * should result in unmodified bytes being packed. If we reach the
+ * blank. UPPER says to map all letters to uppercase. If we reach the
* end of the line, the word is filled up with blanks (which encode as 0's).
- * If we're already at end of line when GETTXT is called, we return -1. */
+ * If we're already at end of line when TEXT is called, we return -1. */
if(LNPOSN != SPLITTING)SPLITTING = -1;
- GETTXT= -1;
-L10: if(LNPOSN > LNLENG)return(GETTXT);
+ TEXT= -1;
+L10: if(LNPOSN > LNLENG)return(TEXT);
if((!SKIP) || INLINE[LNPOSN] != 0) goto L11;
LNPOSN=LNPOSN+1;
goto L10;
-L11: GETTXT=0;
+L11: TEXT=0;
/* 15 */ for (I=1; I<=5; I++) {
- GETTXT=GETTXT*64;
+ TEXT=TEXT*64;
if(LNPOSN > LNLENG || (ONEWRD && INLINE[LNPOSN] == 0)) goto L15;
CHAR=INLINE[LNPOSN];
if(CHAR >= 63) goto L12;
SPLITTING = -1;
if(UPPER && CHAR >= 37)CHAR=CHAR-26;
- GETTXT=GETTXT+CHAR;
+ TEXT=TEXT+CHAR;
goto L14;
L12: if(SPLITTING == LNPOSN) goto L13;
- GETTXT=GETTXT+63;
+ TEXT=TEXT+63;
SPLITTING = LNPOSN;
goto L15;
-L13: GETTXT=GETTXT+CHAR-63;
+L13: TEXT=TEXT+CHAR-63;
SPLITTING = -1;
L14: LNPOSN=LNPOSN+1;
L15: /*etc*/ ;
} /* end loop */
- if(HASH)GETTXT=GETTXT+MOD(HASH*13579L+5432L,97531L)*12345L+HASH;
- return(GETTXT);
+ return(TEXT);
}
-
-
-#define GETTXT(SKIP,ONEWRD,UPPER,HASH) fGETTXT(SKIP,ONEWRD,UPPER,HASH)
-#undef MAKEWD
-long fMAKEWD(long LETTRS) {
-long I, L, MAKEWD;
+long MAKEWD(long LETTRS) {
+long I, L, WORD;
/* Combine five uppercase letters (represented by pairs of decimal digits
* in lettrs) to form a 30-bit value matching the one that GETTXT would
- * return given those characters plus trailing blanks and HASH=0. Caution:
+ * return given those characters plus trailing blanks. Caution:
* lettrs will overflow 31 bits if 5-letter word starts with V-Z. As a
* kludgey workaround, you can increment a letter by 5 by adding 50 to
* the next pair of digits. */
- MAKEWD=0;
+ WORD=0;
I=1;
L=LETTRS;
-L10: MAKEWD=MAKEWD+I*(MOD(L,50)+10);
+L10: WORD=WORD+I*(MOD(L,50)+10);
I=I*64;
- if(MOD(L,100) > 50)MAKEWD=MAKEWD+I*5;
+ if(MOD(L,100) > 50)WORD=WORD+I*5;
L=L/100;
if(L != 0) goto L10;
I=64L*64L*64L*64L*64L/I;
- MAKEWD=MAKEWD*I;
- return(MAKEWD);
+ WORD=WORD*I;
+ return(WORD);
}
-
-#define MAKEWD(LETTRS) fMAKEWD(LETTRS)
-#undef PUTTXT
#define STATE (*sTATE)
-void fPUTTXT(long WORD, long *sTATE, long CASE, long HASH) {
+void fPUTTXT(long WORD, long *sTATE, long CASE) {
long ALPH1, ALPH2, BYTE, DIV, I, W;
/* Unpack the 30-bit value in word to obtain up to 5 integer-encoded chars,
* and store them in inline starting at LNPOSN. If LNLENG>=LNPOSN, shift
- * existing characters to the right to make room. HASH must be the same
- * as it was when gettxt created the 30-bit word. STATE will be zero when
+ * existing characters to the right to make room. STATE will be zero when
* puttxt is called with the first of a sequence of words, but is thereafter
* unchanged by the caller, so PUTTXT can use it to maintain state across
* calls. LNPOSN and LNLENG are incremented by the number of chars stored.
/* ALPH1&2 DEFINE RANGE OF WRONG-CASE CHARS, 11-36 OR 37-62 OR EMPTY. */
DIV=64L*64L*64L*64L;
W=WORD;
- if(HASH)W=W-MOD(HASH*13579L+5432L,97531L)*12345L-HASH;
/* 18 */ for (I=1; I<=5; I++) {
if(W <= 0 && STATE == 0 && IABS(CASE) <= 1)return;
BYTE=W/DIV;
return;
}
-
-
#undef STATE
-#define PUTTXT(WORD,STATE,CASE,HASH) fPUTTXT(WORD,&STATE,CASE,HASH)
-#undef SHFTXT
-void fSHFTXT(long FROM, long DELTA) {
+#define PUTTXT(WORD,STATE,CASE) fPUTTXT(WORD,&STATE,CASE)
+
+void SHFTXT(long FROM, long DELTA) {
long I, II, JJ;
/* Move INLINE(N) to INLINE(N+DELTA) for N=FROM,LNLENG. Delta can be
}
-
-#define SHFTXT(FROM,DELTA) fSHFTXT(FROM,DELTA)
-#undef TYPE0
-void fTYPE0() {
+void TYPE0() {
long TEMP;
-
/* Type a blank line. This procedure is provided as a convenience for callers
* who otherwise have no use for MAPCOM. */
-
TEMP=LNLENG;
LNLENG=0;
TYPE();
return;
}
-
-
-#define TYPE0() fTYPE0()
-
-
/* Suspend/resume I/O routines (SAVWDS, SAVARR, SAVWRD) */
#undef SAVWDS
/* Write or read 7 variables. See SAVWRD. */
-
SAVWRD(0,(*W1));
SAVWRD(0,(*W2));
SAVWRD(0,(*W3));
* poking within the saved file. When we finish reading/writing the file,
* we store zero into WORD if there's no checksum error, else nonzero. */
-
if(OP != 0){long ifvar; ifvar=(STATE); switch (ifvar<0? -1 : ifvar>0? 1 :
0) { case -1: goto L30; case 0: goto L10; case 1: goto L30; }}
if(STATE == 0)return;
#undef WORD
#define SAVWRD(OP,WORD) fSAVWRD(OP,&WORD)
-#undef VOCAB
-long fVOCAB(long ID, long INIT) {
-long HASH, I, VOCAB;
+
+long VOCAB(long ID, long INIT) {
+long I, LEXEME;
/* Look up ID in the vocabulary (ATAB) and return its "definition" (KTAB), or
* -1 if not found. If INIT is positive, this is an initialisation call setting
* (Thus "STEPS", which is a motion verb as well as an object, may be located
* as an object.) And it also means the KTAB value is taken modulo 1000. */
- HASH=10000;
/* 1 */ for (I=1; I<=TABSIZ; I++) {
if(KTAB[I] == -1) goto L2;
- HASH=HASH+7;
if(INIT >= 0 && KTAB[I]/1000 != INIT) goto L1;
- if(ATAB[I] == ID+HASH*HASH) goto L3;
+ if(ATAB[I] == ID) goto L3;
L1: /*etc*/ ;
} /* end loop */
BUG(21);
-L2: VOCAB= -1;
- if(INIT < 0)return(VOCAB);
+L2: LEXEME= -1;
+ if(INIT < 0)return(LEXEME);
BUG(5);
-L3: VOCAB=KTAB[I];
- if(INIT >= 0)VOCAB=MOD(VOCAB,1000);
- return(VOCAB);
+L3: LEXEME=KTAB[I];
+ if(INIT >= 0)LEXEME=MOD(LEXEME,1000);
+ return(LEXEME);
}
-
-
-#define VOCAB(ID,INIT) fVOCAB(ID,INIT)
-#undef DSTROY
-void fDSTROY(long OBJECT) {
-;
-
+void DSTROY(long OBJECT) {
/* Permanently eliminate "OBJECT" by moving to a non-existent location. */
-
MOVE(OBJECT,0);
return;
}
-
-
-#define DSTROY(OBJECT) fDSTROY(OBJECT)
-#undef JUGGLE
-void fJUGGLE(long OBJECT) {
+void JUGGLE(long OBJECT) {
long I, J;
/* Juggle an object by picking it up and putting it down again, the purpose
* being to get the object to the front of the chain of things at its loc. */
-
I=PLACE[OBJECT];
J=FIXED[OBJECT];
MOVE(OBJECT,I);
return;
}
-
-
-#define JUGGLE(OBJECT) fJUGGLE(OBJECT)
-#undef MOVE
-void fMOVE(long OBJECT, long WHERE) {
+void MOVE(long OBJECT, long WHERE) {
long FROM;
/* Place any object anywhere by picking it up and dropping it. May already be
return;
}
-
-
-#define MOVE(OBJECT,WHERE) fMOVE(OBJECT,WHERE)
-#undef PUT
-long fPUT(long OBJECT, long WHERE, long PVAL) {
-long PUT;
+long PUT(long OBJECT, long WHERE, long PVAL) {
+long X;
/* PUT is the same as MOVE, except it returns a value used to set up the
* negated PROP values for the repository objects. */
-
MOVE(OBJECT,WHERE);
- PUT=(-1)-PVAL;
- return(PUT);
+ X=(-1)-PVAL;
+ return(X);
}
-
-
-#define PUT(OBJECT,WHERE,PVAL) fPUT(OBJECT,WHERE,PVAL)
-#undef CARRY
-void fCARRY(long OBJECT, long WHERE) {
+void CARRY(long OBJECT, long WHERE) {
long TEMP;
/* Start toting an object, removing it from the list of things at its former
* location. Incr holdng unless it was already being toted. If OBJECT>100
* (moving "fixed" second loc), don't change PLACE or HOLDNG. */
-
if(OBJECT > 100) goto L5;
if(PLACE[OBJECT] == -1)return;
PLACE[OBJECT]= -1;
return;
}
-
-
-#define CARRY(OBJECT,WHERE) fCARRY(OBJECT,WHERE)
-#undef DROP
-void fDROP(long OBJECT, long WHERE) {
-;
-
+void DROP(long OBJECT, long WHERE) {
/* Place an object at a given loc, prefixing it onto the ATLOC list. Decr
* HOLDNG if the object was being toted. */
-
if(OBJECT > 100) goto L1;
if(PLACE[OBJECT] == -1)HOLDNG=HOLDNG-1;
PLACE[OBJECT]=WHERE;
-#define DROP(OBJECT,WHERE) fDROP(OBJECT,WHERE)
-#undef ATDWRF
-long fATDWRF(long WHERE) {
-long ATDWRF, I;
+long ATDWRF(long WHERE) {
+long AT, I;
/* Return the index of first dwarf at the given location, zero if no dwarf is
* there (or if dwarves not active yet), -1 if all dwarves are dead. Ignore
* the pirate (6th dwarf). */
- ATDWRF=0;
- if(DFLAG < 2)return(ATDWRF);
- ATDWRF= -1;
+ AT=0;
+ if(DFLAG < 2)return(AT);
+ AT= -1;
for (I=1; I<=5; I++) {
if(DLOC[I] == WHERE) goto L2;
- if(DLOC[I] != 0)ATDWRF=0;
+ if(DLOC[I] != 0)AT=0;
} /* end loop */
- return(ATDWRF);
+ return(AT);
-L2: ATDWRF=I;
- return(ATDWRF);
+L2: AT=I;
+ return(AT);
}
+/* Utility routines (SETBIT, TSTBIT, set_seed, get_next_lcg_value,
+ * randrange, RNDVOC, BUG) */
-
-
-#define ATDWRF(WHERE) fATDWRF(WHERE)
-
-
-
-/* Utility routines (SETBIT, TSTBIT, set_seed, get_next_lcg_value, randrange, RNDVOC, BUG) */
-
-#undef SETBIT
-long fSETBIT(long BIT) {
-long I, SETBIT;
+long SETBIT(long BIT) {
+long I, IND;
/* Returns 2**bit for use in constructing bit-masks. */
-
- SETBIT=1;
- if(BIT <= 0)return(SETBIT);
+ IND=1;
+ if(BIT <= 0)return(IND);
for (I=1; I<=BIT; I++) {
- SETBIT=SETBIT+SETBIT;
+ IND=IND+IND;
} /* end loop */
- return(SETBIT);
+ return(IND);
}
-#define SETBIT(BIT) fSETBIT(BIT)
-#undef TSTBIT
-long fTSTBIT(long MASK, long BIT) {
-long TSTBIT;
+long TSTBIT(long MASK, long BIT) {
/* Returns true if the specified bit is set in the mask. */
-
- TSTBIT=MOD(MASK/SETBIT(BIT),2) != 0;
- return(TSTBIT);
+ return(MOD(MASK/SETBIT(BIT),2) != 0);
}
-
-
-#define TSTBIT(MASK,BIT) fTSTBIT(MASK,BIT)
-
void set_seed(long seedval)
{
- srand(seedval);
- lcgstate.x = (unsigned long) rand() % lcgstate.m;
+ lcgstate.x = (unsigned long) seedval % lcgstate.m;
}
unsigned long get_next_lcg_value(void)
return(result);
}
-#undef RNDVOC
-long fRNDVOC(long CHAR, long FORCE) {
-long DIV, I, J, RNDVOC;
-
+long RNDVOC(long CHAR, long FORCE) {
/* Searches the vocabulary for a word whose second character is char, and
* changes that word such that each of the other four characters is a
* random letter. If force is non-zero, it is used as the new word.
* Returns the new word. */
+ long RND;
- RNDVOC=FORCE;
- if(RNDVOC != 0) goto L3;
- for (I=1; I<=5; I++) {
- J=11+randrange(26);
- if(I == 2)J=CHAR;
- RNDVOC=RNDVOC*64+J;
- } /* end loop */
-L3: J=10000;
- DIV=64L*64L*64L;
- for (I=1; I<=TABSIZ; I++) {
- J=J+7;
- if(MOD((ATAB[I]-J*J)/DIV,64L) == CHAR) goto L8;
- /*etc*/ ;
- } /* end loop */
- BUG(5);
+ RND=FORCE;
-L8: ATAB[I]=RNDVOC+J*J;
- return(RNDVOC);
-}
+ if (RND == 0) {
+ for (int I = 1; I <= 5; I++) {
+ long J = 11 + randrange(26);
+ if (I == 2)
+ J = CHAR;
+ RND = RND * 64 + J;
+ }
+ }
+ long DIV = 64L * 64L * 64L;
+ for (int I = 1; I <= TABSIZ; I++) {
+ if (MOD(ATAB[I]/DIV, 64L) == CHAR)
+ {
+ ATAB[I] = RND;
+ break;
+ }
+ }
+ return(RND);
+}
-#define RNDVOC(CHAR,FORCE) fRNDVOC(CHAR,FORCE)
-#undef BUG
-void fBUG(long NUM) {
+void BUG(long NUM) {
/* The following conditions are currently considered fatal bugs. Numbers < 20
* are detected while reading the database; the others occur at "run time".
/* Machine dependent routines (MAPLIN, TYPE, MPINIT, SAVEIO) */
-#define BUG(NUM) fBUG(NUM)
-#undef MAPLIN
-void fMAPLIN(FILE *OPENED) {
- signed char *cp;
-
+void MAPLIN(FILE *OPENED) {
+long I, VAL;
+
/* Read a line of input, from the specified input source,
* translate the chars to integers in the range 0-126 and store
* them in the common array "INLINE". Integer values are as follows:
if(MAP2[1] == 0)MPINIT();
- if (!oldstyle && SETUP)
- fputs("> ", stdout);
- IGNORE(fgets(raw_input,sizeof(INLINE)-1,OPENED));
+ if (!oldstyle && SETUP && OPENED == stdin)
+ fputs("> ", stdout);
+ do {
+ IGNORE(fgets(rawbuf,sizeof(rawbuf)-1,OPENED));
+ } while
+ (!feof(OPENED) && rawbuf[0] == '#');
if (feof(OPENED)) {
- if (logfp)
+ if (logfp && OPENED == stdin)
fclose(logfp);
} else {
- if (logfp)
- IGNORE(fputs(raw_input, logfp));
+ if (logfp && OPENED == stdin)
+ IGNORE(fputs(rawbuf, logfp));
else if (!isatty(0))
- IGNORE(fputs(raw_input, stdout));
- for (cp = raw_input; *cp; cp++)
- INLINE[cp - raw_input + 1]=MAP1[*cp + 1];
- LNLENG = (cp - raw_input);
+ IGNORE(fputs(rawbuf, stdout));
+ strcpy(INLINE+1, rawbuf);
+ LNLENG=0;
+ for (I=1; I<=(long)sizeof(INLINE) && INLINE[I]!=0; I++) {
+ VAL=INLINE[I]+1;
+ INLINE[I]=MAP1[VAL];
+ if(INLINE[I] != 0)LNLENG=I;
+ } /* end loop */
LNPOSN=1;
}
}
-#define MAPLIN(FIL) fMAPLIN(FIL)
-#undef TYPE
-void fTYPE(void) {
+void TYPE(void) {
long I, VAL;
/* Type the first "LNLENG" characters stored in inline, mapping them
* from integers to text per the rules described above. INLINE(I),
* I=1,LNLENG may be changed by this routine. */
-
if(LNLENG != 0) goto L10;
printf("\n");
return;
return;
}
-
-
-#define TYPE() fTYPE()
-#undef MPINIT
-void fMPINIT(void) {
+void MPINIT(void) {
long FIRST, I, J, LAST, VAL;
-static long RUNS[7][2] = {32,34, 39,46, 65,90, 97,122, 37,37, 48,57, 0,126};
-
+static long RUNS[7][2] = { {32,34}, {39,46}, {65,90}, {97,122}, {37,37}, {48,57}, {0,126} };
for (I=1; I<=128; I++) {
MAP1[I]= -1;
return;
}
-
-
-#define MPINIT() fMPINIT()
#undef SAVEIO
void fSAVEIO(long OP, long IN, long ARR[]) {
static FILE *F; char NAME[50];
}
+void DATIME(long* D, long* T) {
+ struct timeval tv;
+ gettimeofday(&tv, NULL);
+ *D = (long) tv.tv_sec;
+ *T = (long) tv.tv_usec;
+}
-
-long fIABS(N)long N; {return(N<0? -N : N);}
-long fMOD(N,M)long N, M; {return(N%M);}
+long IABS(N)long N; {return(N<0? -N : N);}
+long MOD(N,M)long N, M; {return(N%M);}