#define IEEE80211_MAX_MESH_ID_LEN 32
#define IEEE80211_QOS_CTL_LEN 2
-#define IEEE80211_QOS_CTL_TID_MASK 0x000F
-#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
+/* 1d tag mask */
+#define IEEE80211_QOS_CTL_TAG1D_MASK 0x0007
+/* TID mask */
+#define IEEE80211_QOS_CTL_TID_MASK 0x000f
+/* EOSP */
+#define IEEE80211_QOS_CTL_EOSP 0x0010
+/* ACK policy */
+#define IEEE80211_QOS_CTL_ACK_POLICY_NORMAL 0x0000
+#define IEEE80211_QOS_CTL_ACK_POLICY_NOACK 0x0020
+#define IEEE80211_QOS_CTL_ACK_POLICY_NO_EXPL 0x0040
+#define IEEE80211_QOS_CTL_ACK_POLICY_BLOCKACK 0x0060
+/* A-MSDU 802.11n */
+#define IEEE80211_QOS_CTL_A_MSDU_PRESENT 0x0080
/* U-APSD queue for WMM IEs sent by AP */
#define IEEE80211_WMM_IE_AP_QOSINFO_UAPSD (1<<7)
#define IEEE80211_HT_CAP_40MHZ_INTOLERANT 0x4000
#define IEEE80211_HT_CAP_LSIG_TXOP_PROT 0x8000
+/* 802.11n HT extended capabilities masks (for extended_ht_cap_info) */
+#define IEEE80211_HT_EXT_CAP_PCO 0x0001
+#define IEEE80211_HT_EXT_CAP_PCO_TIME 0x0006
+#define IEEE80211_HT_EXT_CAP_PCO_TIME_SHIFT 1
+#define IEEE80211_HT_EXT_CAP_MCS_FB 0x0300
+#define IEEE80211_HT_EXT_CAP_MCS_FB_SHIFT 8
+#define IEEE80211_HT_EXT_CAP_HTC_SUP 0x0400
+#define IEEE80211_HT_EXT_CAP_RD_RESPONDER 0x0800
+
/* 802.11n HT capability AMPDU settings (for ampdu_params_info) */
#define IEEE80211_HT_AMPDU_PARM_FACTOR 0x03
#define IEEE80211_HT_AMPDU_PARM_DENSITY 0x1C
/* block-ack parameters */
#define IEEE80211_ADDBA_PARAM_POLICY_MASK 0x0002
#define IEEE80211_ADDBA_PARAM_TID_MASK 0x003C
-#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFA0
+#define IEEE80211_ADDBA_PARAM_BUF_SIZE_MASK 0xFFC0
#define IEEE80211_DELBA_PARAM_TID_MASK 0xF000
#define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
#define WLAN_CAPABILITY_ESS (1<<0)
#define WLAN_CAPABILITY_IBSS (1<<1)
+
+/*
+ * A mesh STA sets the ESS and IBSS capability bits to zero.
+ * however, this holds true for p2p probe responses (in the p2p_find
+ * phase) as well.
+ */
+#define WLAN_CAPABILITY_IS_STA_BSS(cap) \
+ (!((cap) & (WLAN_CAPABILITY_ESS | WLAN_CAPABILITY_IBSS)))
+
#define WLAN_CAPABILITY_CF_POLLABLE (1<<2)
#define WLAN_CAPABILITY_CF_POLL_REQUEST (1<<3)
#define WLAN_CAPABILITY_PRIVACY (1<<4)
WLAN_CATEGORY_MULTIHOP_ACTION = 14,
WLAN_CATEGORY_SELF_PROTECTED = 15,
WLAN_CATEGORY_WMM = 17,
- /* TODO: remove MESH_PLINK and MESH_PATH_SEL after */
- /* mesh is updated to current 802.11s draft */
- WLAN_CATEGORY_MESH_PLINK = 30,
+ /* TODO: remove MESH_PATH_SEL after mesh is updated
+ * to current 802.11s draft */
WLAN_CATEGORY_MESH_PATH_SEL = 32,
WLAN_CATEGORY_VENDOR_SPECIFIC_PROTECTED = 126,
WLAN_CATEGORY_VENDOR_SPECIFIC = 127,
/* Although the spec says 8 I'm seeing 6 in practice */
#define IEEE80211_COUNTRY_IE_MIN_LEN 6
+/* The Country String field of the element shall be 3 octets in length */
+#define IEEE80211_COUNTRY_STRING_LEN 3
+
/*
* For regulatory extension stuff see IEEE 802.11-2007
* Annex I (page 1141) and Annex J (page 1147). Also
};
-/* A-MSDU 802.11n */
-#define IEEE80211_QOS_CONTROL_A_MSDU_PRESENT 0x0080
-
/* cipher suite selectors */
#define WLAN_CIPHER_SUITE_USE_GROUP 0x000FAC00
#define WLAN_CIPHER_SUITE_WEP40 0x000FAC01
#define WLAN_PMKID_LEN 16
+/*
+ * WMM/802.11e Tspec Element
+ */
+#define IEEE80211_WMM_IE_TSPEC_TID_MASK 0x0F
+#define IEEE80211_WMM_IE_TSPEC_TID_SHIFT 1
+
+enum ieee80211_tspec_status_code {
+ IEEE80211_TSPEC_STATUS_ADMISS_ACCEPTED = 0,
+ IEEE80211_TSPEC_STATUS_ADDTS_INVAL_PARAMS = 0x1,
+};
+
+struct ieee80211_tspec_ie {
+ u8 element_id;
+ u8 len;
+ u8 oui[3];
+ u8 oui_type;
+ u8 oui_subtype;
+ u8 version;
+ __le16 tsinfo;
+ u8 tsinfo_resvd;
+ __le16 nominal_msdu;
+ __le16 max_msdu;
+ __le32 min_service_int;
+ __le32 max_service_int;
+ __le32 inactivity_int;
+ __le32 suspension_int;
+ __le32 service_start_time;
+ __le32 min_data_rate;
+ __le32 mean_data_rate;
+ __le32 peak_data_rate;
+ __le32 max_burst_size;
+ __le32 delay_bound;
+ __le32 min_phy_rate;
+ __le16 sba;
+ __le16 medium_time;
+} __packed;
+
/**
* ieee80211_get_qos_ctl - get pointer to qos control bytes
* @hdr: the frame
category = ((u8 *) hdr) + 24;
return *category != WLAN_CATEGORY_PUBLIC &&
*category != WLAN_CATEGORY_HT &&
+ *category != WLAN_CATEGORY_SELF_PROTECTED &&
*category != WLAN_CATEGORY_VENDOR_SPECIFIC;
}