default 16384 if CARL9170FW_RX_FRAME_LEN_16384
default 32768 if CARL9170FW_RX_FRAME_LEN_32768
-config CARL9170FW_WATCHDOG
- def_bool y
- prompt "Activate HW Watchdog"
- ---help---
- The watchdog will notify the application as soon as the firmware
- has stalled.
-
- Say Y.
-
config CARL9170FW_GPIO_INTERRUPT
def_bool y
prompt "GPIO Software Interrupt"
endmenu
-menu "802.11 Firmware Features"
-
-config CARL9170FW_HANDLE_BACK_REQ
- def_bool y
- prompt "Handle BlockACK Requests in Firmware"
- ---help---
- Enables a firmware mechanism to answer incoming BlockACK requests.
- This feature is necessary to comply with 802.11n. So say Y,
- if you have plans to support this operation mode.
-
-config CARL9170FW_BACK_REQS_NUM
- default 4
- int
- prompt "Number of max. active BlockACK Request"
- depends on CARL9170FW_HANDLE_BACK_REQ
-
-config CARL9170FW_CAB_QUEUE
- def_bool y
- prompt "Support software-based Content after Beacon Queue"
- ---help---
- This (software) queue is used to send any broad-/multi-cast buffered
- frames after the next DTIM beacon.
-
- This feature is required for Accesspoint mode operation.
-
- Say Y.
-
-endmenu
-
source "carlfw/usb/Kconfig"
menu "Experimental, Unstable & Testing Extensions"
def_bool y
prompt "Experimental Features"
-config CARL9170FW_PSM
- def_bool y
- prompt "Firmware Supported Power-saving Management"
- depends on CARL9170FW_EXPERIMENTAL && CARL9170FW_RADIO_FUNCTIONS
- ---help---
- This options enables a interface for the application to
- switch off the RF/PHY (in order to save power). And the
- Firmware will automatically turn it on again, when the
- PRETBTT event fires.
-
-config CARL9170FW_DELAYED_TX
- def_bool n
- prompt "Delay and reorder TX"
- depends on CARL9170FW_EXPERIMENTAL
- ---help---
- Delay incoming TX' from the application until wlan_complete
- has finished.
-
- This feature is necessary to keep A-MPDUs partially ordered.
-
- Doesn't work 100% yet, but in most cases other HW designs can
- deal with the fallout.
-
-config CARL9170FW_TX_AMPDU
- def_bool n
- prompt "Firmware-supported ampdu scheduling"
- depends on CARL9170FW_EXPERIMENTAL
-
config CARL9170FW_WOL_OPTION
def_bool n
prompt "Wakeup on WLAN"
def_bool n
depends on CARL9170FW_WOL_OPTION
-config CARL9170FW_WOL_MAGIC_PACKET
+config CARL9170FW_WOL_NL80211_TRIGGERS
def_bool n
- prompt "Magic Packet(tm)"
+ prompt "Standard NL80211 wakeup triggers"
depends on CARL9170FW_WOL_OPTION
select CARL9170FW_WOL
---help---
- Sniff all incoming data frames for the magic packet pattern.
+ Available triggers:
+ * Magic Packet(tm) pattern
+ * disconnect event
config CARL9170FW_WOL_PROBE_REQUEST
def_bool n
prompt "Probe Request"
depends on CARL9170FW_WOL_OPTION
- select CARL9170FW_WOL_CHECK
+ select CARL9170FW_WOL
---help---
Scan probe requests for a given SSID.
prompt "Firmware MAC Chip recovery"
depends on CARL9170FW_EXPERIMENTAL
+config CARL9170FW_NOISY_MAC_RESET
+ def_bool n
+ prompt "Notify MAC RESET events"
+ depends on CARL9170FW_FW_MAC_RESET
+
config CARL9170FW_BROKEN_FEATURES
def_bool n
prompt "Broken Featurs"
config CARL9170FW_WATCHDOG_BUTTON
def_bool n
- depends on CARL9170FW_BROKEN && CARL9170FW_WATCHDOG && CARL9170FW_GPIO_INTERRUPT
+ depends on CARL9170FW_BROKEN && CARL9170FW_GPIO_INTERRUPT
prompt "Trigger Watchdog by pressing the WPS button"
choice CARL9170FW_UART_CLOCK
endchoice
-
-choice
- prompt "TX / RX Path"
-
- default CARL9170FW_NORMAL_TX_RX
-
- config CARL9170FW_NORMAL_TX_RX
- bool
- prompt "Normal WLAN TX/RX routines"
-
- config CARL9170FW_LOOPBACK
- bool
- depends on CARL9170FW_BROKEN_FEATURES
- prompt "TX->(tx feedback)->RX loopback"
- ---help---
- Useful carlu testcase.
-
- config CARL9170FW_DISCARD
- bool
- depends on CARL9170FW_BROKEN_FEATURES
- prompt "TX->(tx feedback)"
- ---help---
- Useful carlu testcase
-
-endchoice
-
config CARL9170FW_UNUSABLE
def_bool y
- depends on CARL9170FW_BROKEN || CARL9170FW_LOOPBACK
+ depends on CARL9170FW_BROKEN || CARL9170FW_DEBUG
config CARL9170FW_USB_MODESWITCH
def_bool n