- long rnd = force;
-
- if (rnd == 0) {
- for (int i = 1; i <= 5; i++) {
- long j = 11 + randrange(26);
- if (i == 2)
- j = second;
- rnd = rnd * 64 + j;
- }
- }
-
- long div = 64L * 64L * 64L;
- for (int i = 1; i <= TABSIZ; i++) {
- if (MOD(ATAB[i]/div, 64L) == second)
- {
- ATAB[i] = rnd;
- break;
- }
- }
-
- return rnd;
-}
-
-void BUG(long num)
-/* The following conditions are currently considered fatal bugs. Numbers < 20
- * are detected while reading the database; the others occur at "run time".
- * 0 Message line > 70 characters
- * 1 Null line in message
- * 2 Too many words of messages
- * 3 Too many travel options
- * 4 Too many vocabulary words
- * 5 Required vocabulary word not found
- * 6 Too many RTEXT messages
- * 7 Too many hints
- * 8 Location has cond bit being set twice
- * 9 Invalid section number in database
- * 10 Too many locations
- * 11 Too many class or turn messages
- * 20 Special travel (500>L>300) exceeds goto list
- * 21 Ran off end of vocabulary table
- * 22 Vocabulary type (N/1000) not between 0 and 3
- * 23 Intransitive action verb exceeds goto list
- * 24 Transitive action verb exceeds goto list
- * 25 Conditional travel entry with no alternative
- * 26 Location has no travel entries
- * 27 Hint number exceeds goto list
- * 28 Invalid month returned by date function
- * 29 Too many parameters given to SETPRM */
-{
-
- printf("Fatal error %ld. See source code for interpretation.\n", num);
- exit(0);
-}
-
-/* Machine dependent routines (MAPLIN, TYPE, MPINIT, SAVEIO) */
-
-void MAPLIN(FILE *fp)
-{
- long I, VAL;
-
- /* Read a line of input, from the specified input source,
- * translate the chars to integers in the range 0-126 and store
- * them in the common array "INLINE". Integer values are as follows:
- * 0 = space [ASCII CODE 40 octal, 32 decimal]
- * 1-2 = !" [ASCII 41-42 octal, 33-34 decimal]
- * 3-10 = '()*+,-. [ASCII 47-56 octal, 39-46 decimal]
- * 11-36 = upper-case letters
- * 37-62 = lower-case letters
- * 63 = percent (%) [ASCII 45 octal, 37 decimal]
- * 64-73 = digits, 0 through 9
- * Remaining characters can be translated any way that is convenient;
- * The "TYPE" routine below is used to map them back to characters when
- * necessary. The above mappings are required so that certain special
- * characters are known to fit in 6 bits and/or can be easily spotted.
- * Array elements beyond the end of the line should be filled with 0,
- * and LNLENG should be set to the index of the last character.
- *
- * If the data file uses a character other than space (e.g., tab) to
- * separate numbers, that character should also translate to 0.
- *
- * This procedure may use the map1,map2 arrays to maintain static data for
- * the mapping. MAP2(1) is set to 0 when the program starts
- * and is not changed thereafter unless the routines on this page choose
- * to do so. */
-
- if(MAP2[1] == 0)MPINIT();
-
- if (!oldstyle && fp == stdin)
- fputs("> ", stdout);
- do {
- IGNORE(fgets(rawbuf,sizeof(rawbuf)-1,fp));
- } while
- (!feof(fp) && rawbuf[0] == '#');
- if (feof(fp)) {
- if (logfp && fp == stdin)
- fclose(logfp);
- } else {
- if (logfp && fp == stdin)
- IGNORE(fputs(rawbuf, logfp));
- else if (!isatty(0))
- IGNORE(fputs(rawbuf, stdout));
- strcpy(INLINE+1, rawbuf);
- LNLENG=0;
- for (I=1; I<=(long)sizeof(INLINE) && INLINE[I]!=0; I++) {
- VAL=INLINE[I]+1;
- INLINE[I]=MAP1[VAL];
- if(INLINE[I] != 0)LNLENG=I;
- } /* end loop */
- LNPOSN=1;
- }
-}
-
-void TYPE(void)
-/* Type the first "LNLENG" characters stored in inline, mapping them
- * from integers to text per the rules described above. INLINE
- * may be changed by this routine. */
-{
- long i;
-
- if(LNLENG == 0) {
- printf("\n");
- return;
- }
-
- if(MAP2[1] == 0)
- MPINIT();
- for (i=1; i<=LNLENG; i++) {
- INLINE[i]=MAP2[INLINE[i]+1];
- }
- INLINE[LNLENG+1]=0;
- printf("%s\n", INLINE+1);
- return;
-}
-
-void MPINIT(void)
-{
- long first, i, j, last, val;
- static long RUNS[7][2] = { {32,34}, {39,46}, {65,90}, {97,122},
- {37,37}, {48,57}, {0,126} };
- for (i=1; i<=128; i++) {
- MAP1[i]= -1;
- }
- val=0;
- for (i=0; i<7; i++) {
- first =RUNS[i][0];
- last = RUNS[i][1];
- for (j=first; j<=last; j++) {
- j++;
- if (MAP1[j] < 0) {
- MAP1[j]=val;
- ++val;
- }
- j--;
- }
- }
- MAP1[128]=MAP1[10];
- /* For this version, tab (9) maps to space (32), so del (127)
- * uses tab's value */
- MAP1[10]=MAP1[33];
- MAP1[11]=MAP1[33];
-
- for (i=0; i<=126; i++) {
- i++; val=MAP1[i]+1; i--;
- MAP2[val] = i*('B'-'A');
- if(i >= 64)
- MAP2[val]=(i-64)*('B'-'A')+'@';
- }
-}
-
-void fSAVEIO(long op, long in, long arr[])
-/* If OP=0, ask for a file name and open a file. (If IN=true, the file is for
- * input, else output.) If OP>0, read/write ARR from/into the previously-opened
- * file. (ARR is a 250-integer array.) If OP<0, finish reading/writing the
- * file. (Finishing writing can be a no-op if a "stop" statement does it
- * automatically. Finishing reading can be a no-op as long as a subsequent
- * SAVEIO(0,false,X) will still work.) */
-{
- static FILE *fp = NULL;
- char name[50];
-
- switch (op < 0 ? -1 : (op > 0 ? 1 : 0))
- {
- case -1:
- fclose(fp);
- break;
- case 0:
- while (fp == NULL) {
- printf("\nFile name: ");
- IGNORE(fgets(name, sizeof(name), stdin));
- fp = fopen(name,(in ? READ_MODE : WRITE_MODE));
- if(fp == NULL)
- printf("Can't open file %s, try again.\n", name);
- }
- break;
- case 1:
- if (in)
- IGNORE(fread(arr,sizeof(long),250,fp));
- else
- IGNORE(fwrite(arr,sizeof(long),250,fp));
- break;
- }