2 * This file is provided under a dual BSD/GPLv2 license. When using or
3 * redistributing this file, you may do so under either license.
7 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
9 * This program is free software; you can redistribute it and/or modify
10 * it under the terms of version 2 of the GNU General Public License as
11 * published by the Free Software Foundation.
13 * This program is distributed in the hope that it will be useful, but
14 * WITHOUT ANY WARRANTY; without even the implied warranty of
15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
16 * General Public License for more details.
18 * You should have received a copy of the GNU General Public License
19 * along with this program; if not, write to the Free Software
20 * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
21 * The full GNU General Public License is included in this distribution
22 * in the file called LICENSE.GPL.
26 * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
27 * All rights reserved.
29 * Redistribution and use in source and binary forms, with or without
30 * modification, are permitted provided that the following conditions
33 * * Redistributions of source code must retain the above copyright
34 * notice, this list of conditions and the following disclaimer.
35 * * Redistributions in binary form must reproduce the above copyright
36 * notice, this list of conditions and the following disclaimer in
37 * the documentation and/or other materials provided with the
39 * * Neither the name of Intel Corporation nor the names of its
40 * contributors may be used to endorse or promote products derived
41 * from this software without specific prior written permission.
43 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
44 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
45 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
46 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
47 * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
48 * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
49 * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
50 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
51 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
52 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
53 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
58 #include "probe_roms.h"
61 /* we are configuring for 2 SCUs */
62 static const int num_elements = 2;
65 * For all defined arrays:
66 * elements 0-3 are for SCU0, ports 0-3
67 * elements 4-7 are for SCU1, ports 0-3
69 * valid configurations for one SCU are:
72 * 0xF,0x0,0x0,0x0 # 1 x4 port
73 * 0x3,0x0,0x4,0x8 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are each x1
75 * 0x1,0x2,0xC,0x0 # Phys 0 and 1 are each x1 ports, phy 2 and phy 3 are a x2
77 * 0x3,0x0,0xC,0x0 # Phys 0 and 1 are a x2 port, phy 2 and phy 3 are a x2 port
78 * 0x1,0x2,0x4,0x8 # Each phy is a x1 port (this is the default configuration)
80 * if there is a port/phy on which you do not wish to override the default
81 * values, use the value assigned to UNINIT_PARAM (255).
84 /* discovery mode type (port auto config mode by default ) */
87 * if there is a port/phy on which you do not wish to override the default
88 * values, use the value "0000000000000000". SAS address of zero's is
89 * considered invalid and will not be used.
92 static const int mode_type = SCIC_PORT_MANUAL_CONFIGURATION_MODE;
93 static const __u8 phy_mask[2][4] = { {1, 2, 4, 8},
95 static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFFF0000001ULL,
96 0x5FCFFFFFF0000002ULL,
97 0x5FCFFFFFF0000003ULL,
98 0x5FCFFFFFF0000004ULL },
99 { 0x5FCFFFFFF0000005ULL,
100 0x5FCFFFFFF0000006ULL,
101 0x5FCFFFFFF0000007ULL,
102 0x5FCFFFFFF0000008ULL } };
103 #else /* APC (default) */
104 static const int mode_type = SCIC_PORT_AUTOMATIC_CONFIGURATION_MODE;
105 static const __u8 phy_mask[2][4];
106 static const unsigned long long sas_addr[2][4] = { { 0x5FCFFFFF00000001ULL,
107 0x5FCFFFFF00000001ULL,
108 0x5FCFFFFF00000001ULL,
109 0x5FCFFFFF00000001ULL },
110 { 0x5FCFFFFF00000002ULL,
111 0x5FCFFFFF00000002ULL,
112 0x5FCFFFFF00000002ULL,
113 0x5FCFFFFF00000002ULL } };
116 static const int cable_selection[2][4];
118 /* Maximum number of concurrent device spin up */
119 static const int max_num_concurrent_dev_spin_up = 1;
121 /* enable of ssc operation */
123 * NOTE: also see probe_roms.h. This value can be set for ssc values.
124 * Values can be set for:
125 * ssc_sata_tx_spread_level
126 * ssc_sas_tx_spread_level
129 static const __u8 enable_ssc;
131 /* AFE_TX_AMP_CONTROL */
132 static const unsigned int afe_tx_amp_control0 = 0x000bdd08;
133 static const unsigned int afe_tx_amp_control1 = 0x000ffc00;
134 static const unsigned int afe_tx_amp_control2 = 0x000b7c09;
135 static const unsigned int afe_tx_amp_control3 = 0x000afc6e;
137 static const char blob_name[] = "isci_firmware.bin";
138 static const char sig[] = "ISCUOEMB";
139 static const unsigned char version = ISCI_ROM_VER_LATEST;